Please select your home edition
Edition
Vaikobi 2024 LEADERBOARD

International Melges 32 Class Association appoints new president

by International Melges 32 Class Association on 21 Jan 2016
International Melges 32 Class Association appoints new president International Melges 32 Class Association
Giangiacomo Serena di Lapigio, owner and helmsman of Melges 32 MON-181, G-SPOT, member of Yacht Club de Monaco and Vice President of Circolo Nautico e della Vela Argentario, has been appointed as the new President of the International Melges 32 Class Association (IM32CA) for the 2016-17 term.

Following the legacy of past President Jason Carroll, Serena di Lapigio is looking forward to supporting and growing the class in both Europe and North America.

'When I was offered to take the presidency of the class, I assumed it was the usual title without real work,' commented a deeply committed Serena di Lapigio. 'Instead, after speaking with various owners, friends and key people in USA and Europe, I realized there is much to be done and I accepted enthusiastically.'

'Our goal is to provide an entertaining class that sees the arrival of many new entries, and signal that the Melges 32 never ceases to attract sailors who enjoy sailing strictly one-design. Most especially in a class that continues to attract the very best sailors and champions to some of sailing's most prestigious venues around the world.'

For the past three seasons, Serena di Lapigio has been a staple at European and North American regattas, carrying the flags of both his G-SPOT racing team and that of the IM32CA. The 2016 season will see Serena di Lapigio, the board and the entire class management involved in promoting events in North America and Europe, guiding them along a unique path leading to the 2016 World Championship happening in Newport, R.I. on 29 September - 2 October.

'One of our commitments as a class today is to bring together the North American and European fleets while offering Melges 32 owners a new circuit which aims to encourage, facilitate and enhance the participation on both continents,' continued Serena di Lapigio.

'The activity in North America in recent months is very lively thanks to the launch of the Blue Water Series in Florida. European enthusiasm is high with the forthcoming European Sailing Series. In a few months, the focus will shift to Newport for the ultimate contest in grand-prix, one-design racing - the 2016 Melges 32 World Championship.'

Following in the footsteps of many successful owner-class presidents that have successfully navigated changes in the Melges 32 Class, Giangiacomo Serena di Lapigio states that one item remains a priority - every event must provide an unforgettable sailing experience.

With renewed enthusiasm in both North America and Europe along with a strong Class President, board and continental Fleet Managers, the forecast is calling for steady, promising conditions for the International Melges 32 Class.
Rooster 2023 - Aquafleece Robe - FOOTERSydney International Boat Show 2024Cyclops Marine 2023 November - FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May