Please select your home edition
Edition
Marine Resources 2019 - Leaderboard

Frequently Asked Questions Regarding ILCA Approved Builders

by Eric Faust 8 Apr 00:30 PDT
Alan Davis leading the Laser Masters at Notts County © David Eberlin

The International Laser Class Association would like to thank the members, reporters, class stakeholders, boatbuilders and equipment suppliers for their tremendous response and messages of support after last week's announcement that ILCA is seeking new builders for the class racing dinghy. The response has been so overwhelming that we need to apologize to anyone who has not received a timely response to their inquiry or message.

ILCA would like to now answer some of the numerous questions we've received from ILCA members and dinghy owners as well as to correct some of the erroneous information that is now floating around the web. We invite anyone with additional questions to send an email to office@laserinternational.org with the term "FAQ" in the subject line so we can try to answer them and add them to our list.

Q: I recently purchased a boat from Laser Performance. Is it class-legal?

A: Any Laser class boat with a valid World Sailing Plaque affixed to the aft face of the cockpit will remain ILCA class-legal. And, of course, any hull without a valid World Sailing plaque will not be ILCA class-legal.

Q: I ordered a new boat from Laser Performance and will be picking it up soon. How will I know if my new boat is class-legal?

A: Only a boat with a World Sailing Plaque affixed to the aft face of the cockpit is class-legal. If you want to assure that your new boat will be legal for ILCA-sanctioned events, you should check that there is a World Sailing Plaque in the cockpit.

Q: What does a World Sailing Plaque look like? How do I know if I have one?

A: The World Sailing Plaque is a plastic decal with a metallic finish that includes the World Sailing logo and your ILCA sail number. It is attached to the aft face of the cockpit of all class-legal boats. World Sailing changes the design of the plaque every so often, and an example of the current World Sailing Plaque issued by ILCA is attached below. If in doubt, take a photo and send it to ILCA and we'll have a look.

Q: I have a decal in the back of my boat, but it doesn't look like the plaque you have shown. Is my plaque OK?

A: Over the years there have been a few different class-legal plaque designs. The most recent plaque design was issued by World Sailing in 2017 when ISAF changed its name and logo to World Sailing. The plaque design has evolved over time from IYRU plaques, to ISAF plaques, and now to World Sailing Plaques. Sample images of class-legal plaques are shown below.

Q: What about my existing sail? Will it still be class-legal?

A: If your sail has a red or orange sail button near the tack reading "ILCA AUTHORIZED" it is legal for use in all ILCA-sanctioned events and events that use the ILCA class rules. Of course, if you still have an older class-legal sail that predates the introduction of sail buttons, that sail would still be considered class legal.

Q: I read that the rights of the European builder have been terminated. Can I still buy a boat from the US builder? A: There hasn't been an approved Laser manufacturer in the US since the single Rhode Island location shut down some years ago. ILCA is currently working through the application and approval process with a number of prospective new builders, and we expect to have suppliers up and running soon to support every region where Laser class boats are sailed.

Q: What is happening? I don't understand why ILCA rejected the builder?

A: The previously approved builder of class-legal boats in Europe breached the terms of the Laser Construction Manual Agreement (LCMA), which seeks to ensure the identical nature of all Laser class boats wherever they are built which is a fundamental principle of the class. This is the same Agreement signed by every ILCA approved builder worldwide. After the European builder unequivocally indicated that they wouldn't abide by the term of the LCMA that requires all builders to allow ILCA to inspect their factories, ILCA terminated the agreement with respect to the European builder only in order to protect the one-design principle of the class. As a result, ILCA is now moving forward with the review and approval of applications from interested and qualified manufacturers to complement the existing network of class-approved builders and dealers.

Q: Will the terminated European builder continue to make Lasers? Will those boats be class-legal?

A: ILCA has no information regarding the future of the recently terminated builder. Regardless of their plans, please note that only boats with valid World Sailing Plaques affixed to the aft face of the cockpit will be legal for use in ILCA-sanctioned class events or any event that uses the ILCA Class Rules.

Q: What about sails and parts? Can I continue to get class-legal equipment from my regular Laser dealer?

A: All existing class-legal equipment will remain class-legal, so your local dealer may already have what you need in stock. Parts and equipment labeled in accordance with the current Construction Manual will continue to be class-legal. ILCA will provide updated guidance for sailors and measurers about how to identify class-legal equipment as soon as updated "class authorized" decals are in use by suppliers for spars, foils and other parts.

Q: How do I know if a part is class-legal, going forward?

A: ILCA will provide updated guidance for sailors and measurers about how to identify class-legal equipment as soon as updated "class authorized" decals are in use by suppliers. ILCA expects to implement a digital inventory tracking system that will ensure that all parts and equipment are manufactured and distributed only by class-approved suppliers. When ILCA rolls out these changes, we will post more information about how to check that your equipment is class-legal.

Q: I need to buy sails and parts. How long will it take to get a new builder in my area?

A: ILCA has had a tremendous response so far and we will soon be accepting formal applications from new builders. We expect to be able to name new builders quickly, but in the meantime, the existing class-approved builders in Australia and Japan have committed to assuring that class-legal equipment remains available. All existing class-legal parts and sails in stock with dealers will remain class-legal. ILCA and the existing class-approved builders are already working to ensure that new class-legal sails and equipment are available to all customers.

Q: Will I still be able to get class-legal parts from my local dealer?

A: ILCA understands that many dealers have a substantial stock of class-legal equipment. All class-legal equipment in stock now will continue to be class-legal. As new builders come online, we expect that dealers will transition to the new sources of equipment.

Q: Will boats from the newly-named builders be sold under the LASER brand?

A: No. In order to avoid trade mark issues and to comply with the requirements of European competition law, all current and future ILCA-approved builders will sell boats under a new brand name. ILCA and the current approved builders are finalizing the intellectual property details for the new brand, including fair, reasonable and non-discriminatory (FRAND) licensing rules. ILCA expects to announce the new brand name in the next four weeks.

Q: If the name of the boat changes, what will happen to my Laser? Will it still be legal to race?

A: All current, class-legal Lasers are and will remain ILCA class-legal. The proposed change simply changes the brand name to avoid trade mark complications. The new system would allow class-legal Lasers (those with World Sailing Plaques) to participate in any ILCA event along with the new, alternately branded boats. After all, it's the boat that matters, not the brand!

Q: Will these changes affect the status of ILCA and the class with World Sailing?

A: No, the class will continue to operate as usual. All regions, districts and fleets should also continue operating as usual. ILCA has obtained confirmation that changing the brand name of the boat will NOT affect our class status with World Sailing. World Sailing cares about the boat, not the brand.

Q: Will the Laser and Laser Radial classes still be in the Olympics?

A: Yes, the Laser and Laser Radial Class boats will be used in the Men's and Women's One-Person Dinghy events in the 2020 Tokyo Olympics. Boats will be supplied by the current, class-approved builder in Japan. ILCA is committed to assuring that the Laser and Laser Radial Classes are also represented in the 2024 Olympics and for as long as our racing dinghy remains one of the world's most important.

Q: How can the Laser stay in the Olympics if the name of the boat changes?

A: The name of the Olympic events that include the Laser are the "Men's and Women's One-Person Dinghy," and the name of the boat is irrelevant to the Olympics. Like ILCA and World Sailing, the International Olympic Committee cares about events, athletes and equipment, not brands.

Q: You wrote that ILCA is seeking new builders. How many new builders will there be?

A: We're not seeking a specific number of new builders. What we are seeking is a worldwide network of existing and new builders that are selected on a fair, reasonable, and non-discriminatory (FRAND) basis in accordance with World Sailing's strict equipment policies. ILCA is currently working with our existing builders and World Sailing to establish the details of the criteria by which we name new builders.

Q: If there are too many builders won't it be hard to control the quality?

A: ILCA and World Sailing are very aware of the problems which might be caused by "boutique" builders and have agreed to establish criteria, including minimum volume thresholds, to address that issue. ILCA has extensive technical and inspection experience and will work closely with the World Sailing technical department to ensure boats are built to the highest uniform standards worldwide.

Q: Can the terminated European builder be reapproved as a class-legal manufacturer?

A: Yes, but since the agreement with the former European builder has been terminated, it would need to enter into new arrangements with ILCA and the remaining parties to the agreement. Any reapproval would be under the same FRAND terms as will apply to all other builders.

Q: The European class organization published a request to mediate some kind of negotiation between ILCA and the terminated builder. Will that happen?

A: ILCA fully understands and appreciates the importance of the European region, which represents 61% of the class members worldwide, and the role the former European builder played in that region. ILCA will continue to cooperate with all relevant stakeholders and to protect the best interest of our members and our sport. ILCA remains open to participate in any reasonable negotiations and would look forward to engaging in a constructive dialogue to explore reapproval.

Q: Do these changes mean that ILCA will now be approving the new carbon rigs?

A: No. ILCA's success has been based on tightly controlled evolution, not revolution. The latest announcements regarding approved builders has nothing to do with the new rigs under development and there are no plans to introduce any new rigs as class-legal equipment at this time.

Q: Is World Sailing aware of these changes?

A: Yes. ILCA has kept World Sailing fully informed during this process and we continue to work in close cooperation with the governing body of our sport.

Q. Isn't World Sailing looking at changing the singlehanded equipment right now? Won't this controversy make them kick the Laser out of the Olympics?

A. A change to one of the equipment suppliers does not change the fact that Laser class and Laser Radial class boats are the best choices as equipment for the Men's and Women's One-Person Dinghy Events, regardless of the brand name under which they are sold. With over 215,000 boats worldwide and active class associations in over 120 countries, we are the only class that can deliver true universality and gender equality for our sport. ILCA is optimistic that we will be reapproved as Olympic equipment for 2024 and beyond and we will continue to work tirelessly in support of our class, our sailors and our sport.

Related Articles

Lasers at Bartley
Midland Grand Prix Series Finale The final event of the Midland Grand Prix started with a first for the club; a social event on the preceding evening including various nautical and non-nautical games followed by a sleep over in the clubhouse. Posted on 17 Oct
Lasers at Chichester
South Coast Grand Prix Series finale After gales on Friday, and high winds forecast again for Sunday, Saturday brought a lull in the wind. Unfortunately it also brought a damp mist and minimal wind. Some keen Laser sailors made their way to CYC hoping for sailable conditions Posted on 14 Oct
Lasers at Burghfield
Thames Valley Series Finale The season finale at Burghfield Sailing Club on Saturday the 12th October had meant to be the event of the year. All week it was looking to be great sailing conditions, but on the day we were met with rain, rain and more rain. Posted on 14 Oct
One Design PROtect Tapes
A set of cut pieces tailored to your class PROtect Tapes are a broad range of high-quality protection tapes for dinghies, racing, cruising and super yachts. PROtect Tapes provides a pro-active solution to chafe and wear prevention. It enhances performance and ultimately promotes safer sailing. Posted on 10 Oct
Sail Sandy Regatta closes in on 200 entries
Just two days until racing gets under way With just two days until the 2019 Sail Sandy Regatta gets under way at the Sandringham Yacht Club, entry numbers are closing in on the double tonne, with 187 boats entered at midday on Thursday. Posted on 10 Oct
One Design or Two?
David Henshall looks at control (and abuse) of hull shapes over the years Science fiction and the Terminator movies introduced us to the notion of shape shifting, but in the real life of the sailing dinghy world, how IS a shape defined? Posted on 9 Oct
Mini-Transat La Boulangère day 4
The skippers are just about done with the demanding passage across the Bay of Biscay. Virtually all the competitors are opting to pass inside the Cape Finisterre TSS, aside from four sailors who are going for broke to the Far West, a move they hope will pay off. Posted on 8 Oct
Lasers at Datchet Water
Thames Valley Series Open event A reasonable turnout of 18 Standards and 7 Radials made the event at Datchet. It was a gorgeous sunny day, made better by the light to medium winds forecast. Posted on 6 Oct
SailingFast Laser Qualifier at Sunderland
Big turnout for first of three winter World and European qualifiers On the weekend of the 28-29th September 48 keen Laser Radial, 20 Standard and 36 4.7s sailors made the journey to Sunderland to kick off the first of three winter World and European qualifiers. Posted on 4 Oct
Team GB reveals first athletes for Tokyo 2020
Hannah Mills and Giles Scott are among 12 sailors selected The Rio 2016 champions are joined by a host of elite sailors representing eight of the 10 Olympic sailing classes, as the team is announced at Haven Holiday Park, Rockley Park in Poole. Posted on 2 Oct
Vaikobi 2019AUG - Footer 1Festival of Sails 2020 - FOOTERMarine Resources 2019 - Footer