Please select your home edition
Edition
SCIBS 2024 LEADERBOARD

One race and barely a breeze at the J24 Worlds

by Andrew Campbell on 8 May 2009
Yesterday, Cinco de Mayo greeted the J24 Worlds fleet with hardly a breath of air. We motored out to the Chesapeake at the mouth of the Severn River to find flat and often glassy conditions.

The race committee could barely muster a starting line, much less a full race as the breeze pulsed in and retreated to some unknown location. At around 3pm our race officers gave us AP over H sending the fleet back to the dock at what seemed to be a premature hour. But, only minutes after the boat was packed up and at the dock, the overcast skies turned quickly to dumping rain and left the fleet secretly thanking the AYC race committee for not having us sit in the rain for a second day in a row.

Today, was not much better in terms of breeze. As we motored out in a strong ebb tide, thanks to almost a week of consistent rain, a light southeasterly filled to the excitement of the racers. Although light, the breeze was sufficiently steady to set a line and long beat with two knots or more current running directly upwind. Only a handful of boats were over the line and we took our lane from the middle-pin all the way left towards the 70 foot deep channel on that side of the race course.

We tacked shy of the port tack layline and feathered into a each vein of light pressure into the weather mark. We had to fend off two boats from the left of us but were relatively unscathed out in first place down the first run. The breeze died bit by bit as we sailed the next four legs around a shortened race track. We fought off a brief rally by 'Rental,' the boat that would ultimately be third in the race, but were able to extend on the last beat for a comfortable lead across the finish line.

As happy as we were to have dodged a bullet in a light and flukey race, team 'Talking Heads' had to remain cool-headed for the next two hours anticipating a second race. Unfortunately, the breeze died ahead of the rain in similar fashion to yesterday and we were sent home under AP over A leaving us with two days left to sail and seven races left on the schedule. For what they’re worth the results got plenty jumbled today as the light air conditions got the best of some very good teams.

1 28/ ITA 434 Fiamma Gialla Andrea Casale Italia 21 9 8 5 43.00 1
2 70/ CAN 2827 Clear Air Rossi Milev Canada 23 5 6 10 44.00 2
3 65/ USA 2934 Mookie Peter Levesque USA 10 31 9 9 59.00 3
4 30/ GBR 5237 Hedgehog Ian Southworth England 1 24/ZFP 18 24 67.00 4
5 21/ ARG 5194 Carrera Matias Pereira Argentina 8 14 17 29 68.00 5
6 68/ USA 5078 Paraloc Will Welles USA 14 7 22 26 69.00 6
7 91/ USA 5362 National Sailing Hall of Fame Chris Larson USA 2 22/ZFP 43 6 73.00 7
8 16/ JPN 5289 Three Bond Tetsuya Matsunaga Japan 12 3 23 35 73.00 8
9 37/ BRA 37 Bruschetta Mauricio Santa Cruz Brazil 6 1 63/20% 11 81.00 9
10 58/ USA 58 Bangor Packet Anthony Parker USA 5 22 2 52/40% 81.00 10

Check J24WorldChampionship2009.com for up to date results, and see our frontman Charlie Enright getting grilled by the SailGroove.org guys here.
Selden 2020 - FOOTERNavico AUS Zeus3S FOOTERCyclops Marine 2023 November - FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May