Please select your home edition
Edition
North Sails Performance 2023 - LEADERBOARD

Vendee Globe - Margin shrinks to 28nm before Le Cleac'h gets breeze

by Vendee Globe on 30 Dec 2016
Jean-Pierre Dick made his fifth rounding of Cape Horn on Friday December 29, 2016 Vendee Globe http://www.vendeeglobe.org
After Alex Thomson on Hugo Boss appears to have completed one of the biggest comebacks ever in the history of the Vendee Globe, reducing his delta to 28 miles this Friday morning from over 800 miles last Friday, his rival Armel Le Cléac'h has found a light easterly breeze and is now moving away from the British skipper who was making just over three knots.

Elsewhere in the fleet Enda O'Coineen is approaching his anchorage of choice at Stewart Island south of New Zealand and Jean Pierre Dick is approaching Cape Horn.

There are 600 testing, head scratching miles ahead of the leaders to Cabo Frio - by Rio - where the breezes appear to strengthen and become more consistent. These miles in the South Atlantic are a patchwork of windless cells, little local ridges of high pressure waiting like sticky tentacles of light winds and mini-depressions. This area is a notorious battleground where breezes are hard to predict, where the weather models and routing software often struggle for accuracy. And just as Thomson has got himself almost within touching distance, at the closest he has been to Le Cléac'h in 27 days of racing, it appears as the tables have swung back in the French skipper's favour. Thomson's route - 120 miles or so to the east of that taken by Le Cléac'h - may be about a longer term investment but for the moment Le Cléac'h is in a light breeze and back in control.

Dick (StMichel-Virbac) is propelled by a good westerly air stream and should just be able to see the familiar outline of the rock at sunrise. The two skippers chasing him will go through a similar experience around ten hours later. Jean Le Cam (Finistère Mer Vent) is around ten miles ahead of Yann Eliès (Quéguiner-Leucémie Espoir). All three will be making their entrance into the Atlantic with a westerly air stream, which is set to weaken as they reach Staten Island. They will have to wait until midday on Saturday for the weather to change with a new low developing off Patagonia.



A southern low should also enable Louis Burton (Bureau Vallée) to take advantage of a south-westerly breeze, which is cold, but will push him along the edge of the Antarctic Exclusion Zone, but looking ahead to around five days from now, his rounding of Cape Horn is not looking easy with a high blocking his path… This could allow Nándor Fa (Spirit of Hungary) and Conrad Colman (Foresight Natural Energy) to narrow the gap as they will have a front right behind them. As for the five to the south of Chatham Island, the low-pressure system has scattered the skippers. Still led by Eric Bellion (Comme Un Seul Homme) with Arnaud Boissières (La Mie Câline) and Alan Roura (La Fabrique) in his wake, Fabrice Amedeo (Newrest-Matmut) and Rich Wilson (Great America IV) have preferred to play it safe by heading towards the NE to avoid the nasty seas and very strong winds.

Irishman, Enda O’Coineen is about to arrive on Stewart Island and may moor in the same bay as Yves Parlier in 2001. It will be obvious later this morning where he decides to shelter the goal is to carry out a thorough check up of Kilcullen Voyager-Team Ireland and repairs need to be made to her mast track and autopilots. Didac Costa (One Planet-One Ocean) has also been busy carrying out repairs to his steering over the past couple of days.

The Catalan sailor is now back racing pushed along by a low, which he tackled from the centre. He now has Romain Attanasio (Famille Mary-Étamine du Lys) right behind him, while Sébastien Destremau (TechnoFirst-faceOcean) and Pieter Heerema (No Way Back) still have 750 miles to sail before entering the Pacific. Now 8000 miles - or one third of the race course - separate the two frontrunners from the pair at the rear more than an ocean behind.

Quotes

Jérémie Beyou (Maître CoQ): “It took time for the wind to develop after Cape Horn, particularly around Staten Island. I found myself in an area of light airs. The wind finally arrived from the SW and reached forty knots around the Falklands, but the breeze is not very stable. The wind should last for a few more hours, but afterwards, it is looking more complicated. There is a transition zone with very little wind before we set off again upwind. You have to be ready for anything in this area, as it is where the weather systems develop for the whole of the South Atlantic.

There are small lows which pop up and highs which move around… I’m not really watching Jean-Pierre Dick, as he is 800 miles behind, with several weather systems between us, so we won’t experience the same conditions. I am going to have to remain focused until Cape Frio, but then after that, it should be much simpler with the trade winds”.

Rooster 2023 - Aquafleece Robe - FOOTERJ Composites J/99Selden 2020 - FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May