Please select your home edition
Edition
A+T Instruments 2024 Leaderboard

2015 Mini Transat - Îles de Guadeloupe - Good progress

by Mini Transat on 7 Nov 2015
Mini Transat - Îles de Guadeloupe 2015 Jacques Vapillon / Mini Transat http://www.minitransat.fr
One just needs to check the statistics to imagine the pace set by leading boat of the Mini Transat îles de Guadeloupe. Since leaving Lanzarote, the boats ahead of the fleet have covered almost 1600 miles, at an average speed of 11 knots. If they could have sailed a direct course, they would have already crossed more than half of the Atlantic. However, the detour to the north of the Cape Verde Islands to pick up the trade winds cost them a further 370 miles or so. A few facts and figures.

It is still full speed ahead of the fleet. The trade wind is still strong and the conditions are conducive to speed, although this second part of course, the fatigue of both men and equipment could lead some to ease off. At the same time, the high level of confrontation between the leaders is pushing everyone to get the most out of his or her machine. Only breakage or exhaustion might weaken the will of each to push their limits. This is clearly what happened to Victor Turpin (Générations Océans), who is only progressing at 2.5 knots. The skipper however, informed the race direction that all was well and that he did not require assistance. K8, one of the support boats, diverted to join his position, which should be reached this evening.

The race in figures

1227,8: number of miles covered on the great circle, which is 44.23% of the total distance between the Canary Islands and Guadeloupe. On the great circle, Fred Denis held an average speed of 8.6 knots. In series Ian Lipinski (Entreprises Innovantes) covered 1,099.9 miles, a difference of less than 130 miles between the first prototype and the first series boat.

1598.5: number of miles covered on the water. More than 370 miles difference with the great circle. This year, the strategy was clear: plunging south was the only way through. Fidel Turienzo (Satanas), the main proponent of a northern route, is leading by more than 200 miles. The gap should shorten over the coming hours, as the southern group will be approaching the great circle.
5: number of successive leaders in both prototypes and series boats. Ian Lipinski and Fred Denis take the lion's share, leading by three days eleven hours and three days nine hours respectively.

572.4: the maximum difference recorded between Dominik Lenk (dominiklenk.com) at the back of the fleet and the leading prototype. Nearly three days at sea. In series Yann Claverie (MAP Product) is 656 miles behind the first series boat.

18.17: The maximum difference on November 3rd in production boats, between the leader Benoît Hantzperg (YCA Dhumeaux Secours Populaire) and his second Ian Lipinski - a gap that reflects the intensity of the battle at the head of the fleet. In prototype Denis Fred was 41.13 miles ahead of Jean-Baptiste Daramy (Chocolates Paries).

295.57: number of miles covered by Fred Denis, coming close to Bertrand Delesne’s record in 2010. With 251.95 miles, Ian Lipinski is still twenty miles behind the record set in series boats by Xavier Macaire, on the way back from Les Sables - the Azores - Les Sables in 2010.

36: number of positions gained over the rankings by Julien Pulvé (Novintiss) in series boats. The most regular progression so far is for Edouard Golbery (Les Enfants du Canal), from thirty-two to third place. In prototype, Axel Tréhin (Aleph Racing) and Vincent Grison (Roll my Chicken) are credited with the best progression with 15 places.

11: number of unexpected or planned stopovers, proof once again that this second leg, however fantastic, spares neither the boats nor the skippers.

42: number of the imposing delegation at Douarnenez that will travel to Guadeloupe for the finish. Municipal councilors, members of Cornwall’s Chamber of Commerce and Industry, of the Douarnenez Tourist Office, the “Penn Sardinn” will be making themselves heard in Pointe-à-Pitre.

Last minute: K8, one of the support boats was able to reach Victor Turpin, deploring the breakage of one of his rudder hinges. He is able to finish repairs before setting off, and he is good spirits. In the Cape Verde Islands, Pierre-Marie Bazin (Voiles des Anges) has officially abandoned, mainly due to doubting the soundness of his keel.

Ranking Sixth November at 18h (TU+1):

Series (Ocean Bio-Actif Ranking):

1 Ian Lipinski – 866 – Entreprises Innovantes à 1 643.5 milles from the finish
2 Julien Pulvé – 880 - Novintiss à 3.3 milles
3 Edouard Golbery – 514 – Les Enfants du Canal à 65.1 milles
4 Edwin Thibon – 721 – Cœur Fidèle à 66.3 milles
5 Tanguy Le Turquais – 835 – Terréal à 65.5 milles

Prototypes (Eurovia Cegelec Ranking):

1 Frédéric Denis – 800 – Nautipark à 1 511.5 milles from the finish
2 Clément Bouyssou – 802 – Le Bon Agent – Bougeons l’Immobilier à 26.4 milles
3 Axel Tréhin – 716 – Aleph Racing à 28.4 milles
4 Ludovic Méchin – 667 – Microvitae à 32,9 milles
5 Luke Berry – 753 – Association Rêves à 36,2 milles
North Sails Performance 2023 - FOOTER2024 fill-in (bottom)Sydney International Boat Show 2024

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May