Please select your home edition
Edition
North Sails Performance 2023 - LEADERBOARD

Team Brunel s’empare de la 7ème étape de la Volvo Ocean Race

by Volvo Ocean Race on 27 May 2015
Leg 7 arrivals in Lisbon - Team Brunel - Volvo Ocean Race 2014-15 Ricardo Pinto / Volvo Ocean Race
Bouwe Bekking et son équipage ont remporté ce matin, au lever du jour, la 7ème étape de la Volvo Ocean Race, une transatlantique entre Newport et Lisbonne. Une fin d’étape sous tension qui s’est terminée sans un souffle d’air et sur une mer d’huile dans la superbe baie de Lisbonne.

Dans la nuit lisboète, l’équipage hollandais a progressé lentement vers la ligne d’arrivée à la vitesse d’un nœud, parfois deux sur les derniers mètres. Bekking à la barre, pas un mot à bord, la concentration était maximale sur Brunel pour un finish vécu comme interminable par les marins qui n’avaient pas relâché la pression depuis 9 jours.

Enfin, à 7h 09 minutes 49 secondes (heure française), les Hollandais ont pu souffler et laisser exploser leur joie. Ils signent leur deuxième victoire après celle remportée à Abu Dhabi lors de la deuxième étape de ce Tour du Monde. « Tout le monde a fait un super boulot à bord et merci aussi à l’équipe à terre. C’est super de gagner ici à Lisbonne. Tu ne sais jamais avant de finir ce qui peut se passer surtout quand tu finis comme ici dans pas de vent du tout. J’ai souvent traversé l’Atlantique et c’est probablement la plus facile sur le plan des conditions météo. Mais la course a été tellement intense. Donc c’est celle qui prendra une grande place dans mes souvenirs » a raconté Bekking à son arrivée au ponton.
Iker Martinez a été le deuxième à franchir la ligne d’arrivée à Lisbonne. Avec son équipage de MAPFRE dont le français Jean-Luc Nélias, l’Espagnol termine cette transatlantique 21 minutes et 10 secondes derrière Bouwe Bekking.

Le bateau noir et jaune de Bekking devrait conserver sa troisième place* au général et se rapprocher dangereusement du tableau arrière du deuxième du général, Dongfeng Race Team. Pour l’équipage sino-français, cette arrivée sur Lisbonne est en train de tourner en véritable cauchemar. A l’heure d’envoyer ce communiqué (8h00 HF), Team Alvimedica vient de passer Caudrelier et ses hommes et pourrait être le troisième bateau à se présenter sur la ligne. Le vent reste faible devant Lisbonne. Alvimedica et Dongfeng vont devoir encore lutter une bonne heure avant l’arrivée. 0.15 milles séparent les deux bateaux…
Un nouveau communiqué sera envoyé à suivre.

* Le classement général est mis à jour au fur et à mesure des arrivées ici.
Par ailleurs, le classement est avant jury. Ce dernier devant se réunir à Lisbonne pour juger plusieurs cas.

Leg 7
DTL
(NM)
GAIN/LOSS
(NM)
DTF
(NM)
Speed
(kt)
TBRU TBRU FIN - 9d 11h 09min 49s
MAPF MAPF FIN - 9d 11h 31min 39s
DFRT DFRT 2.3  5.7 10 13.5
ADOR ADOR 12.9  10.0 21 15.1
ALVI ALVI 13.8  10.5 22 15.3
SCA1 SCA1 31.1  16.9 39 17.3
VEST VEST DID NOT START






Henri-Lloyd - For the ObsessedCyclops Marine 2023 November - FOOTERVetus-Maxwell 2021 v2 FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May