Please select your home edition
Edition
March to end August 2024 affiliate link

Charleston Race Week action on the horizon

by Charleston Race Week on 9 Apr 2014
Sperry Top-Sider Charleston Race Week 2013 Meredith Block/ Charleston Race Week http://www.charlestonraceweek.com/
Just a couple of days remain before the starting guns sound for the 2014 Sperry Top-Sider Charleston Race Week, but already sailing activity on Charleston Harbor has been fast and furious for several weeks. Five independent events over six weeks in April and May makes Charleston Harbor the epicenter of spring sailing in North America. Over the past week, hundreds of sailors have descended on the Holy City as this region has become one of the most active sailing destinations in the world during the spring.

Founded in 1996 by local sailors, Charleston Race Week has experienced explosive growth over the past decade – from 117 boats in 2005 to nearly 300 this year – making it the Western Hemisphere’s biggest keelboat regatta. The event has served to highlight Charleston Harbor as one of the country’s best sailing venues. Along with the Lowcountry’s growing acclaim as a tourist destination, Charleston’s sailing renown is yielding an almost non-stop ‘springtime of sailing’ for the area.

Three substantial events have already taken place, while two more are on the horizon. Two weeks ago, the James Island Yacht Club hosted a 17-boat fleet of speedy E-Scows, and just last weekend, a fleet of the world’s fastest sailing dinghies made another appearance here. The high-flying, hydro-foiling International Moth Class held its North American Championship here, with reigning World Champion and past Charleston Race Week champ Bora Gulari taking the top prize.

The third spring sailing event took place on Sunday, April 6 when the harbor was awash with kiteboarders, windsurfers, dinghy and catamaran sailors of all stripes, each vying to be named ‘King of the Harbor’ in the inaugural edition of the Fort2Battery Race, a high-octane, unrestricted dash-for-cash that was open to any wind-powered craft.

This upstart event is the brainchild of new Charleston resident Tim Fitzgerald, an active kiteboarder. Fitzgerald started his inaugural drag race Sunday afternoon just off Fort Sumter in a solid, 15-knot northerly breeze. Almost immediately, Gulari sailed his Moth away from an oversubscribed fleet of 60 competitors, once again proving his supremacy on the water. It took the Detroit-based Gulari just under nine minutes to complete the four-mile course. That’s an average speed of around 30 mph, faster than many powerboats.

The Kansas-born Fitzgerald said he moved to Charleston largely for its reputation as a perfect sailing spot. 'With the beaches, the breeze, the harbor, the great attitudes here, and the strong maritime tradition, it’s really a playground for those who love the wind and the water,' he said. Fitzgerald was surprised at just how welcoming the community was for an all-new racing concept, adding that he ‘couldn’t believe’ that his new race sold out just weeks after announcing it. 'Honestly I couldn’t believe the level of support from everyone; local communities, the Coast Guard, the SCDNR, and sailors of every variety.'

For Gulari, who has been competing in Charleston for more than a decade, it was like a day at the office. He says Charleston is a pretty consistent place to sail. 'The breeze, the great people, and the incredible hospitality are always reliable here in Charleston, and I’m just happy to be here for another year.'

As the organizers of Sperry Top-Sider Charleston Race Week – the Western Hemisphere’s biggest and most high-profile event of its kind – get ready to host over 280 boats, crews are arriving early to set up their boats and spend a few days practicing, turning Charleston Harbor into a hive of sailing activity.

Every year, Charleston Race Week also sees the launch of some of the world’s newest racing boats, and one of the most exciting for 2014 is the new 28-foot Farr 280, which has been christened Chessie Racing. A product of the CAD systems at legendary naval architects Farr Yacht Design of Annapolis, Md., this new design will be crewed by Farr designers and staffers, including Farr Yacht Design President Patrick Shaughnessy.

'For us, the Farr 280 is probably the most important new project we’ve had in years,' said Shaughnesy, adding that Charleston is the perfect place to debut the new rocket. 'When we looked at how to best demonstrate the 280, it seemed pretty obvious that Charleston was the place to be,' he said. 'This is the quintessential springtime East Coast regatta, in a beautiful city, with great people; what more could we want?'

Chessie Racing will square off in the tough, 11-boat PHRF A fleet; one of the 16 classes that will be spread over five race courses in the harbor and outside the jetties. More than 80 boats will battle in the largest fleet – the J/70 – and nearly 300 boats will compete for trophies and bragging rights over three days of racing.

Event website: click here

Selden 2020 - FOOTERRooster 2023 - FOOTERHenri-Lloyd - For the Obsessed

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May