Please select your home edition
Edition
SCIBS 2024 LEADERBOARD

Tight at top of leaderboard as Clipper Race passes half way mark

by Clipper Ventures on 14 Feb 2014
Tight at top of leaderboard as Clipper Race passes half way stage - The Old Pulteney Navigator Cup (c) Clipper Ventures Plc
2013 - 14 Clipper Round the World Yacht Race- Just over one point now separates the top two teams as Henri Lloyd wins Race 8, The Old Pulteney Navigator Cup, into Singapore.

The Clipper Race fleet has arrived in One15 Marina, Sentosa Cove, Singapore after a gruelling 33 days at sea since departing Brisbane, Australia.

Race 8: The Old Pulteney Navigator Cup - part of the 16 stage Clipper Round the World Yacht Race - was particularly long and challenging due to unfavourable weather conditions which saw severe squalls, a water spout, stifling temperatures and wind holes frustrate the fleet. These resulted in officials having to end the race early at the Sarangani mark, just off the coast of Mindanoa in the Philippines, in order to avoid further delays into Singapore.

The boats were instructed to make best speed and have arrived over the last two days to celebrate their success, with Henri Lloyd taking first place after a very close finish with Great Britain, just seconds apart. OneDLL clinched the final podium place, less than half an hour behind.

The win is Henri Lloyd’s second of the series. Skipper Eric Holden said: 'The toughest part of this race was staying patient. It was long and sometimes it seemed like we were making very little progress and making very little gains to the leaders. We just had to be patient and wait to make our move.

'We had some damage in Australia and missed two races so really this is like back to back wins for us as the last time we got to race properly was from Albany to Sydney. It’s good to be back on top and show everyone that we’re still here and we’re still fighting.'

Great Britain skipper Simon Talbot celebrated his team’s second place finish and commented: 'Our race didn't start well. We were trailing the fleet for the first few days but we dug deep, focused on the result and worked incredibly hard as a team to claw the positions back. By the end we were so close to first place but we couldn't quite take it. Congratulations to Henri Lloyd, it was such an incredibly close finish to such an incredibly tough and challenging race.'

Clipper Race leaders OneDLL took the third podium spot, retaining their place at the top of the overall race standings. Skipper Olly Cotterell commented: 'This was a difficult race. We had headwinds when we should have had favourable winds and there were a lot of changes at the front. We actually lead for a long time and we were a bit unlucky towards the end with the wind hole that developed. At the halfway stage of the series we are in a very strong position but we know we have a lot of work ahead to keep it up.'

OneDLL is now just 1.1 points ahead of Henri Lloyd with 81 and 79.9 points respectively. Derry Londonderry Doire is in third place with 69 points. Great Britain are just four points short of the podium, with Switzerland and Qingdao tied in fifth place, with 61 points.
Sydney International Boat Show 2024Zhik 2024 March - FOOTERVetus-Maxwell 2021 v2 FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May