Please select your home edition
Edition
Cyclops Marine 2023 November - LEADERBOARD

Rolex Sydney Hobart 2013 - Look out for Beau Geste

by Rob Kothe and the Sail-World team on 25 Dec 2013
Beau Geste - Start 2013 Rolex Sydney Hobart Race Rolex / Carlo Borlenghi http://www.carloborlenghi.net
Rolex Sydney Hobart 2013 - New Zealander Gavin Brady flew back into Sydney this afternoon from Auckland with most of the Beau Geste team ahead of tomorrow race.

At the same time Karl Kwok who owns Beaut Geste was jetting in from Hong Kong. His new Botin 80 is considerably shorter than the clutch of 100 footer’s vying for line honours but after an impressive appearance in Sydney, she is being mentioned in 2013 Rolex Sydney Hobart line honours circles.

Kwok's team have had an unusual preparation, they sailed the boat from Auckland less than two weeks ago in full race mode.

Brady explains ‘we are really pleased that we sailed the new boat over with a lot of our race crew. The biggest thing was just getting comfortable with the yacht. The thing with these supermaxis is they make a lot of noises and they are fast and they creaking …. You are always on edge a little bit.

'It takes a long time to get comfortable and it was really nice to get, she’s starting to feel like it home and I think it takes a long time to get that and at the end of the day doing the trip across is the equivalent of a little more than two Hobart’s and that just gives a lot of time and some of that time is just sitting with a coffee in your hand, sitting on deck having a look around and getting comfortable with it.

'I think that it is an important part of learning the boat. You know that when you learn how to sail your first yacht, your Optimist or whatever, and you just go sailing around and you just get comfortable with it. I think you know that’s still applies to these big supermaxi’s.

Asked was this really a Volvo 80 sled. Brady responded 'She is the first of her kind. She has got a lot of riding moment and most of that comes from the hull form and she is quite light displacement. It is not a downwind boat I would say. It is certainly going to perform well downwind because of its weight but it also reaches quite well because of the beam. Typically a supermaxi would weigh upwards of 25 tonnes up to 35 tonnes. We are at 16 and a half.


'It’s not quite as crystal clear as saying the traditional supermaxis are big and heavy but you don’t get that power without the negative of displacement and that is just going to be very interesting for me in this race, is seeing this new type of race yacht against the more traditional supermaxi’s that are very impressive but obviously come with the price of displacement.

'What makes the Sydney to Hobart so unique is that yes you are out there racing the other boats but also you have got to factor in Mother Nature and she will really give you a kick in the arse if you don’t treat the sea with respect.

There hasn’t been any Hobart’s that I have done where we haven’t had to slow down.
'The first one I did was on a Mum 36 back in 1992 or 1993. I have had a bit of a range. I was fortunate enough in the last six or seven being on boats above 60 feet. 'I have been very fortunate to be a Constitution Dock on the early side but it is just such a great race.

'We look like we are quite late to the game because we were in the water, the last boat in the water but I think that since going in the water we have done the most sailing and the most balance of sailing than any team out here.

'Other teams don’t need to because they have already done it before too like Wild Oats team, they are a tight and strong team.


‘I think we needed to do that and I think we needed to come to Australia late and I think we needed to sail to Australia with our race team aboard the yacht. I think if we hadn’t done that we would be very unprepared for this race.

'The Sydney to Hobart really is a coastal race. A lot of people treat it like an offshore race and there is an element to that because you have got to get Bass Strait but you are really only sailing along the coast a lot of the time.

'You have got a lot of changing gears, reading the wind, a lot of little micro weather systems you have got to sail to in the Sydney to Hobart so you have got to make decisions on your feet. While there is a nice forecast at the nav station and the wind is going to shift in two hours this race just continually throws curve balls at you and you have to adapt. It’s a really tough race. A lot of the time you are actually on the coast.

‘ The Sydney Hobart is a really cool race and I think that you really find the balance between coastal type sailing where you have got to pick wind shifts and read currents and clouds and headlands.


‘That’s a big part of this race. I think the 52 helps us to adapt to that style. 'We have most of the Beau Geste TP52 team. The high intensity South Cross Cup style sailing really gets the team working together and communicating. I think it is an asset having the team. We have done a lot this year with the 52 and we have sailed the boat well. We have got some confidence here. '

Navico AUS Zeus3S FOOTERBoat Books Australia FOOTERSelden 2020 - FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May