Please select your home edition
Edition
Rolly Tasker Sails 2023 LEADERBOARD

Rolex Sydney to Hobart Yacht Race - Wild Oats XI develops new strategy

by Rob Mundle on 24 Dec 2013
Heading for Hobart: Rolex Sydney Hobart Race record holder, Wild Oats XI, powers her way south in the 2012 Rolex Sydney Hobart race. Rolex/Daniel Forster http://www.regattanews.com
Rolex Sydney to Hobart Yacht Race 2013 weather outlook, in just 24 hours, has gone from having the potential to deliver a new race record time for Wild Oats XI, to the opposite - a brutal race, not because of too much wind, but because of the lack of it.

Throughout today the nucleus of the crew of Bob Oatley’s 30-metre supermaxi, Wild Oats XI – the current race record holder – has been developing a new strategy for the 628 nautical miles classic, simply because the weather forecast has changed so dramatically. For much of the time the winds will be soft.

'A record race is out the window on today's forecast,' said yachting meteorologist, Roger Badham, adding that the first yacht to finish could be up to 10 hours outside Wild Oats XI’s current record of 1 day, 18 hours, 23 minutes, 12 seconds.
'The only thing for certain is that the start and finish will be relatively easy,' said Wild Oats XI’s tactician, America’s Cup yachtsman and Olympian, Iain Murray. 'What’s in between will be far from that. It’s going to be bloody tricky – more like mental hell. The race weather forecast for the waters off the Tasmanian coast indicate just one thing – minefield!'

Murray said that the current forecast for those waters meant it would be quite easy for one yacht to sail into a calm and stop while another, just a few miles away, stayed in the breeze and continued south at 20 knots. That could mean a gain for them of 40 nautical miles in just two hours.

'There is no doubt this year’s race is going to be an enormous mental challenge – much more so than last year’s race,' Murray said. 'We are going to see an extensive variation in sailing conditions, which means it will be a race where you will have to take well calculated risks and string a whole many of them together successfully if you are going to be first to Hobart.'

Murray said that the influence the light winds would had on the big boats become apparent in the current course plot that had been developed for Wild Oats XI. To stay in the best breeze and get to Hobart in the fastest possible time means they will need to sail more than 100 nautical miles to the east of the rhumb line – the straight-line distance between Sydney and Tasman Island, 44 nautical miles from the finish. This looping course will add at least 120 nautical miles to the distance to be sailed, but even so, it is predicted to be the fastest route.

'It’s going to be very difficult when you’re out there to convince yourself you’re doing the right thing because there’s no coming back towards the coast,' Murray explained, 'even if you suddenly realise the yachts inshore have found breeze and are sailing faster.'
J Composites J/45Sydney International Boat Show 2024North Sails Performance 2023 - FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May