Please select your home edition
Edition
A+T Instruments 2024 Leaderboard

Gilmour Day at Monsoon Cup

by Rob Kothe and the Sail-World Team on 8 Dec 2012
Gilmour vs. Gilmour 2 SubZero Images/Monsoon Cup
Terengganu Malaysia. Four times ISAF World Match Racing Champion and dual Monsoon Cup winner Australia’s Peter Gilmour finished atop the qualifying round leader board yesterday and chose his son David sailing in his first World Match Racing Tour event and the lowest ranked qualifier as his quarter final opponent.

Young Gilly smacked his father on the nose with a first up win but could not hold his line against Gilly Senior who won 3-1 and is now set to race in the semi finals.

Dockside Peter Gilmour commented ‘‘David has been really learning tremendously and he could have easily beaten us except for maybe a little bit of inexperience on his behalf on what to do when you have really got your foot on someone’s throat. You don’t let them up. In the second race, the mistake of doing their penalty after the start will have been a good learning experience for David. He let his old man get up off the deck which was very kind of him.

‘Congratulations to Ian and his time winning their fourth world championship. Ian in his early 30’s that is quite an achievement. I am in awe of him and his team. Ian is only 35 and will surely go on to win a fifth title and then some.
‘Right now we will be taking one race at a time, we will be racing Canfield in the semis – a very talented young sailor and we will need to be on the top of our game.’



David Gilmour was disappointed but pleased to have made it so far. He said ‘We have still lots of things to learn. This whole week we have been working on, if you sail at this top level you have got to be fast and you have got to be sailing the right way and that is what we have been working on all week.

‘Then in the quarter finals we found ourselves in a leading position, we’d won the first race and we were well ahead in the second and forgot a bit about the match racing and the risk management side and kept trying to sail faster around the course and it just didn’t pay off.

‘My Dad was able to get past us in that race. In the other two races I think we were fairly beaten and in the first one where we won we were happy to get that one on him. He still has a few more tricks up his sleeve than we do and we have got a lot to learn.

‘He already has helped us tremendously in this regatta already. Just a few pointers here and there of what we should be doing or shouldn’t be doing. It has definitely probably got us to where we are and we will keep trying to improve and hope to back next year for another go, with a lot more experience under our belts.

‘I have got a good group of guys around me now that are keen to do some more sailing and some more match racing so I think we will give it a good shot now that we have got a good team to work with and go forward with.

‘Right now, we are all hoping Dad you win from here. I think if he keeps sailing well he might be able to knock it off for the third time. I will be the onshore coach for the Semi’s so I will be doing my bit to help.’

Navico AUS Zeus3S FOOTERRS Sailing 2021 - FOOTERSCIBS 2024 FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May