Please select your home edition
Edition
Vetus-Maxwell 2021 v2 LEADERBOARD

Vendee Globe - Tumultuous times on board Gamesa

by Emily Caroe on 5 Dec 2012
4 Dec - On board Gamesa Mike Golding Yacht Racing http://www.mikegolding.com
In the Vendee Globe, times have been tumultuous for skipper Mike Golding on board Gamesa. Mike discusses the ongoing battle with the conditions.

21:00 GMT: Update from Mike from onboard Gamesa:

A really horrid 24hrs running/reaching in dreadful, huge waves. The boat has, and still is, taking a serious pounding in these conditions. Only small things have actually broken such as the gennaker furler drum which detached itself from its stowage position and has done some damage to the bow – probably only cosmetic but there could be some delamination – I’m not concerned as this is a strong bit of the boat. One of the daggerboard covers has come off and broken which means the forward leeward ballast fills and needs continual emptying. The leak in the transom is much worse and I had a good amount of water building up which, with the bouncing and pounding, has leapt over into the next bulkhead – I could shut the door but I like to see what’s happening.

'Everything else, keel system, rig sails deck gear and me have taken real punishment: this is a true Cape of Good Hope experience - and there is no escaping from it. It’s just a function of the wind and massive seas which are so large because of the Agulhas current which is setting against the wind. The water is warm and has both flying fish (normally unseen in the South) and Portuguese Man-O-War jellies in it – worth dodging when they arrive in the cockpit trailing stingers everywhere!

'The predicted fleet compression looks now like it will become a serious extension by the lead pack – disappointing - I need to work the boat to the max, in spite of the conditions - just in case the high comes in slower/faster and allows me to squeeze through. Seems doubtful now – but still worth a go.'


Replay : Le live du Vendée Globe du 4 décembre by VendeeGlobeTV

4 December 2012 08:00 GMT:

After a rough night in challenging sea conditions, Mike Golding is making good progress this morning having passed the west end of the Aiguilles ice gate around midnight.

'We went from the Code 3, to the 7 and one reef then two reefs. I wiped out twice, badly. It was not so much because we were over the range of the sails but just the big seas, the sea state was bad, and the waves just meant we lost it twice. We probably had around 30 kts but getting the right sail combination was not easy. There is a lot a crashing and banging at the moment.

'This was in the forecast, a bit more than expected in the gusts. When we wiped out there was a spike of 40kts and a big shift in direction. So it is not very conducive to fast sailing and we have had to back off just a little.'

Golding is back up to sixth place, 472 miles behind the leader Armel Le Cléac’h and is more than 30 miles ahead of rival Jean Le Cam on Vendee Globe Mike Golding website


Day 24 highlights - Monday, December 3, 2012 by VendeeGlobeTV

Day 25 highlights - Tuesday, December 4, 2012 by VendeeGlobeTV
X-Yachts X4.3Boat Books Australia FOOTERSCIBS 2024 FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted on 1 May
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted on 1 May
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted on 1 May
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted on 1 May
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted on 1 May
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted on 1 May
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted on 1 May
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted on 1 May
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted on 1 May
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted on 1 May