Please select your home edition
Edition




 

Seldén Mast introduces new Rig Tension Car for dinghy jib halyard systems

by Seldén Mast 22 Jun 01:00 PDT
Seldén Mast introduces new Rig Tension Car for dinghy jib halyard systems © Seldén Mast

Seldén Mast has launched a new Rig Tension Car, a practical and cost-effective upgrade for dinghy jib halyard tension systems that replaces the traditional hook and block arrangement with a single, integrated fitting.

Designed for use on Seldén aluminium dinghy spars, the new car incorporates a 25mm high-load stainless steel ball-bearing sheave combined with a halyard hook, reducing both friction and complexity while improving ease of use on the water.

Unlike conventional free-floating hook systems, the Rig Tension Car slides directly in the mainsail track and is retained on the back of the mast. This ensures the car is always to hand during rigging and eliminates the risk of components being lost in the boat or damaging the spar when not under load.

Engaging the car is straightforward: the slug is inserted at the jib halyard exit slot below the gooseneck and slid down the track. The halyard can then be hooked on with one hand, simplifying set-up compared with traditional loose hooks and blocks.

The reduction in friction provided by the low friction slide and ball-bearing sheave makes it noticeably easier to apply rig tension. An integrated indent aligns with calibration marks on the mast, allowing sailors to repeat accurate rig settings with confidence.

A nylon slide pad prevents metal-to-metal contact, protecting the mast's anodised finish and eliminating the gradual wear commonly associated with hook and block systems. The tensioning line or wire can be removed from the car without removing pins or bolts, allowing the mast to be un-stepped quickly and easily.

The Rig Tension Car also incorporates a becket, allowing the first purchase of the tension system to be configured as either 2:1 or 3:1 depending on class or sailor preference. By combining two components into one, the new system is lighter, simpler and more affordable than many existing alternatives.

The Seldén Rig Tension Car is priced at £41.18 inc VAT and is available now through all leading dinghy dealers and direct from the Seldén Dinghy Store at dinghy.seldenmast.com/products/rig-tension-car

The fitting is designed to suit all Seldén aluminium dinghy mast sections except 2420, and will also fit most other manufacturers spars.

Related Articles

Seldén In-Boom Furling
Seldén brings 45 years of furling expertise to manual and electric IBF Seldén is expanding its furling portfolio with the launch of the Seldén IBF - In-Boom Furling, a newly developed furling boom that completes the company's famous range of furling masts. Posted on 16 Nov
Seldén launches the new S19 winch
With patented Asymmetric Rib Technology design on the aluminium drum Seldén is expanding its winch range with the launch of the new S19 to extend Seldén's existing range of winches, which currently spans sizes S30 to S66. Posted on 13 Nov
Seldén launches CXe15
An electric furling system for Code 0 and gennakers With the new CXe15, Seldén makes electric furling more accessible to a wider range of sailors. The new 12V system is operated by push buttons from the cockpit and is designed for sailing yachts up to approximately 37 feet. Posted on 10 Nov
Seldén launches Furlex 104TD
A through-deck jib furling system for keelboats and small yachts Seldén is expanding its Furlex range with the launch of the new Furlex 104TD, a high-end furling system featuring precision-machined components in hard-anodised aluminium. Posted on 3 Nov
Seldén Autumn Deals are now live
30% off carbon spinnaker poles, 15% off other poles, and a Rod Kicker price reduction As we approach into Boat Show season we are delighted to launch our Autumn deals, including 30% off Carbon Spinnaker Poles, and 15% off Furlex, CXr and Telescopic Spinnaker Poles. Posted on 28 Sep
Latest addition to Seldén's Roller Bearing Blocks
Featuring a 50mm sheave, the RBB50 is a compact, high-performance block We are pleased to introduce RBB50, the latest addition to our range of roller bearing blocks. Featuring a 50mm sheave, the RBB50 is a compact, high-performance block designed for demanding, dynamic applications. Posted on 14 Aug
Seldén Launches Dinghy Website & E-Commerce Store
Launching at the RYA Dinghy & Watersports Show Seldén will officially launch its new dedicated dinghy website and e-commerce platform, dinghy.seldenmast.com, which will be going live this Saturday at the RYA Dinghy & Watersports Show. Posted on 20 Feb
Seldén launches E40rev - electric reversible winch
The world premiere will take place at boot Düsseldorf Seldén proudly presents the E40rev, a reversible electric winch operating in two directions and with two speeds. The world premiere will take place at boot Düsseldorf on January 17-25, where the winch will be displayed at the Seldén stand. Posted on 15 Jan
First Look: Seldén CXr at Metstrade 2025
Patented ratchet design and innovative 'nail' terminal Code sails have revolutionised sail handling on yachts, and Seldén's second generation of furlers, called CXr, have a patented ratchet design, as well as an innovative 'nail' terminal to connect to the torsion cables. Posted on 2 Dec 2025