Please select your home edition
Edition
Allen Brothers

Optimist Sprit System Race Pack

by Allen 14 Apr 00:30 PDT
Optimist sprit system © Allen
Looking for a pre-spliced and race-ready Optimist Sprit pack?

Over the last few years we have been supporting a different sailor every season with our Allen Academy Optimist. Throughout this time we have had the pleasure to support some very enthusiastic young sailors who have relayed their important feedback to us.

From this feedback we have developed a cutting edge Optimist sprit system, which is now available to purchase.

Our new pack is pre-spliced and race ready, so all you need to do is attach it to the boat for the smoothest and best looking setup available.

The pack includes everything you need to replace your existing optimist sprit system.

Featured in the optimist sprit pack is one of our most popular blocks, the dynamic A2030Tii. This block offers maximum friction reduction to ensure pulling on tension is as easy as possible for any sailor.

Also included is a specially designed Optimist sprit hook block , the A4068. The block has been shaped to sit flush against the mast to ensure the lead for the sprit rope is as smooth as possible. The block has a ball bearing sheave.

The primary line (the one which loops around the sprit) has an ingenious dog bone stopper, which gives a stylish finish as well as stopping the primary line from unrigging itself when the sprit is taken off.

The pack is super easy to install, just hitch the secondary line (coloured rope) around the cleat on the mast, then feed it through the A2030Tii and back down through the cleat. Slide the handle onto the end and tie a stopper knot. Done!

Check out how to rig the sprit system in the following video

Optimist Sprit System
Optimist Sprit System
£57.63
View
Optimist Rudder Pintle
Optimist Rudder Pintle
£8.39
View
Optimist Rudder Retaining Clip
Optimist Rudder Retaining Clip
£1.38
View
Optimist Burgee Mast Peg
Optimist Burgee Mast Peg
£2.13
View
We have a wide range of Optimist products, check out our range by shopping by Optimist on our website. 
SHOP OPTIMIST PRODUCTS
Follow us on social media
#equippedwithallen
Facebook
LinkedIn
Instagram
Website
Email
Copyright © 2022 Allen Brothers, All rights reserved.

Related Articles

Allen's Hatch Cover Bag
Quickly and easily maximise storage space on your dinghy Looking for a place to stash your snacks, drinks bottle or even a few spare parts whilst out on the water? There's only so many things you can shove in the front of your PFD, so fitting a hatch cover bag will quickly maximise storage space on your dinghy. Posted on 11 Aug
The lightest and strongest
The new TiiTAN block's breaking load is 1250kg A key feature within the TiiTAN bearing system is the use of a precision plain bearing washer. When the TiiTAN is exposed to extreme static loads, which would normally cause damage to the internal bearing system, it changes to a plain bearing block. Posted on 2 Aug
The new TiiTAN Block
Charting new territory for the small pulley market Introducing the TiiTAN Block, the latest high-performance sailing pulley from Allen. The TiiTAN is a further development of the industry-leading XHL block range and is charting new territory for the small pulley market. Posted on 14 Jul
New Allen Product Range: DB Deck Organisers
Lead or divert control lines and halyards with minimal friction Lead or divert control lines and halyards with minimal friction. The Allen DB deck organiser range is available in 20, 30 and 40mm sheave sizes. All feature two lightweight aluminium cheeks, three dynamic bearing sheaves, a becket and nuts and bolts. Posted on 7 Jul
New Allen 40mm Flip Flop Block
Featuring a laser-cut stainless-steel body and backing plate Flip flop blocks are designed to pivot around a central fixing point, this keeps the rope close to the deck, mast or boom whilst still allowing the block to articulate to the correct lead angle, ensuring friction stays as low as possible. Posted on 9 Jun
Allen ILCA Wear Protectors
Stop the damage which can be caused by the mainsheet traveller blocks Introducing the ILCA Wear Protectors, a product designed to stop the damage which can be caused by the mainsheet traveller blocks, ensuring your boat stays protected. Posted on 26 May
How to service Ball Bearing Cam Cleats
A vital part of most control systems on both dinghies and yachts Cam cleats are a vital part of most control systems on both dinghies and yachts. Without them, you would have to hold onto the rope for hours or make the rope off around a horn cleat, not ideal if you want to quickly adjust something! Posted on 9 May
Allen Hardware Partner to Canadian Sailing Team
Sail Canada is glad to see Allen Brothers join the team in its pathway toward the 2024 Olympic Games "Sail Canada is glad to see Allen Brothers join our team in its pathway toward the 2024 Olympic Games," said Sail Canada High-Performance Director, Mike Milner. Posted on 4 Apr
New Allen Product: Tii-LOCK-40
Ever wanted to easily attach Tii-on blocks via a continuous spliced loop? Ever wanted to easily attach one of our Tii-on blocks via a continuous spliced loop? Well, now you can with the new Tii-Lock-40. Posted on 24 Mar