Please select your home edition
Edition
Barton Marine 2019 728x90

Barton Marine launches new products at the Southampton Boat Show

by Barton Marine 6 Sep 2021 01:56 PDT Stand J316, 10-19 September 2021
Barton's new Vang and Mainsheet kits © Barton Marine

Barton Marine are pleased to launch several new products at The Southampton Boat Show 2021. The new products are presented alongside a substantial selection of the existing range on UK distributor Barrus's stand (J316). Barton technical experts will also be on hand to provide advice and help you pick the right deck equipment solutions for your needs.

Three new Vang and Mainsheet kits will be shown to the public in the UK and Europe for the first time at the show. Available in sizes 2, 3 & 5 these fully rigged sets include everything required for quick and easy installation. The size 2 kit (02900) is suitable for boats up to 22ft and is fitted with shackle fittings and a spliced soft eye for maximum strength. Sizes 3 (03900) & 5 (05900) include robust snap shackles top and bottom with a generous length of line spliced on with a soft eye. Suitable for yachts up to 25ft & 35ft respectively, their free running and sturdy construction provides reliable control of mainsails or booms. With an RRP from £116 to £336 inc VAT its time to upgrade to one at the show.

Sometimes you need a cleat where there isn't a factory fitted one! Enter Barton's robust new 32mm Stainless Steel Sliding Cleat. It replaces the previous generation cast aluminium version providing a stronger, sleeker design for this popular car. Acting as a mid-ship spring cleat for yachts with limited access under the side deck or when you just need a temporary solution, simply remove a genoa track end stop, slide on the cleat and lock it in the desired position. Available to purchase now with an RRP of £140.66.

Mounted onto the push pit rail, the Stanchion Lead Block with Cleat enables cleating of the Genoa furler control line with one easy action, doing away with the need to cleat off on the deck or cockpit coaming. It fits 25mm diameter tubing. An adjustable, stainless steel securing ring enables fitting at the correct angle with additional adjustment of the cam cleat angle possible if required. The unit will fully rotate about the swivel head to match your pulling angle. Available in plain bearing (RRP £72.65) or ball bearing (RRP £76.54), the stanchion block with cleat assembly offers smooth running and a long service life.

The Southampton Boat Show runs from the 10th to 19th September and the Barton team look forward to welcoming you there. If you need deck equipment advice in the meantime visit www.bartonmarine.com or call 01227 792979.

Related Articles

Barton Marine to Co-Sponsor the MTA Awards Dinner
At the legendary Grand Café in Southampton the night before Seawork opens The Barton Marine team are pleased to support everyone working across the UK marine trades sector through sponsorship of the 2022 MTA awards dinner. Hosted on the 20th June, the night before Seawork opens at the legendary Grand Café in Southampton. Posted on 23 May
Christian In Conversation at the Dinghy Show
With the Barton Marine SkyDock attracting huge interest, escaping the stand was not an easy task! It is always exciting to discover the new products being launched into the sailing market and when it comes to dinghy gear, there is no better place to find them, than the Dinghy Show. Posted on 6 May
Barton Marine Sponsor Johannes Li
Young German Sailor's Attempt to Circumnavigate the Globe Johannes Li sets sail on May 1st aiming to become the youngest German to circumnavigate the Globe. Over the last six months he has restored a 32ft Nantucket Clipper with the help of sponsorship and limited funds raised from working as an electrician. Posted on 18 Apr
Barton launch 6:1 Topper downhaul assembly
See it at the RYA Dinghy Show this weekend in Farnborough Barton Marine will be launching their new 6:1 Topper Downhaul Assembly at the RYA Dinghy Show this weekend on stand F64. Posted on 25 Feb
Barton Marine set for a Busy Dinghy Show
Hosting live demonstrations, competitions, and giveaways on stand F64 Barton Marine will host live demonstrations, competitions, and giveaways on stand F64 at the RYA Dinghy Show 26-27 February in Farnborough. Posted on 19 Feb
Barton Marine Newsline - One Week, Two Boat Shows!
An exciting month for the Barton team with Boatlife Live Show and the return of the Dinghy Show February 2022 is an exciting month for the Barton team with two UK boat shows in one week! The Barton range can be found at the inaugural Boatlife Live Show in Birmingham from 17th February to Sunday 20th with our UK distributor Barrus. Posted on 17 Feb
Experience SkyDock at Two Great Shows
Barton Marine will display the system at BoatLife and the RYA Dinghy Show The Barton Team is excited to support two full-size SkyDock demonstration displays for visitors attending the new lifestyle show, BoatLife Live at the NEC in Birmingham and the legendary RYA Dinghy Show in its new location in Farnborough. Posted on 13 Feb
Barton Christmas Newsline
A challenging year in many ways, but the sailing action out on the water was amazing As the Barton team head home for a well deserved break, we wish everyone a very Happy Christmas and a fantastic New Year. 2021 has been a challenging year in many ways, but the sailing action out on the water was amazing! Posted on 24 Dec 2021
New at METSTRADE 2021 - Barton Marine's SkyDock
Looking to safely store a dinghy or other items high in your garage loft? Looking to safely store a dinghy or other items high in your garage loft? Barton Marine may have the answer with SkyDock! Mark Jardine speaks to Christian Brewer to find out more... Posted on 17 Nov 2021
Barton Marine new METSTRADE Product Launches
SkyDock and Stanchion Bullseye both designed to enhance boating experiences Barton Marine launches two new innovations to the world at METSTRADE. The new products are on display and presented from the 16th - 18th November, in Amsterdam on stand 01.479. Posted on 10 Nov 2021