Please select your home edition
North Sails 2021 Innovation - LEADERBOARD

Tech Journal: North 3Di for the 49er and 49erFX classes

by North Sails 18 May 2021 10:30 PDT
49er and 49erFX © North Sails

When North Sails was asked by the 49er and 49erFX classes to propose an update to their current sails, the first step was to collect accurate data about how they were performing and what could be improved.

We reached out to Julian Bethwaite, John Clinton, Blair Tuke and Peter Burling, as well as many others who are involved with the class. The feedback was overwhelmingly in favor of better consistency in the sails and more longevity. Our goals quickly became very clear.

North Sails takes a scientific approach to sailmaking. The North Design Suite is a powerful set of proprietary software that allows our designers to model simulations, test hypotheses and eventually, arrive at an optimized solution for the engine above deck. This data-driven approach was visibly on display at the 36th America's Cup, where North designers were embedded with Emirates Team New Zealand, Luna Rossa, and INEOS Team UK.

For the 49er project, it was months of design work and on-the-water testing to conclude that the best sails for the job were 3Di upwind sails. The process that we used to get there is described below.

Modeling and materials

Our discovery for the 49er project began with an eagerness to fully understand the boats and the existing sails. Consistency of both manufacturing and shape, along with longevity, were identified as key areas for improvement. We learned that sailors were buying up to seven inventory sets just to find two that are consistent, so we set a goal to build a set of sails that would be consistent and competitive for up to three regattas. That would reduce sailor aggravation, drastically improve consistency, and also reduce overall inventory costs.


First, we built a virtual model in the North Design Suite that included the shrouds, mast and sails and made it possible to change the tuning for different wind ranges. From there, sail designers Mike Marshall and Mickey Ickert used a combination of five NDS tools (Desman, Spiral, Warps, Flow and Membrain) to run simulations and accurately predict the performance and shape of the current sails—as well as an initial recommendation for new sails.

Material choice

Once we could accurately predict sail performance and flying shape, we A/B tested two material options that could achieve the right shapes: a paneled laminate; and North 3Di. The paneled cloth matched the current class specs while the North-manufactured sailcloth provided improved consistency in both cloth quality and construction. Made using the purpose-built EXact x-ply machine, the sail cloth was produced using a very precise gravure process to ensure perfectly measured adhesive coating; even glue distribution (and less glue overall) would reduce weight without sacrificing strength.

While our paneled laminate sails would've been a small step forward, we were certain that 3Di would be a much more significant improvement in our stated goals: improving both repeatability and longevity.

3Di would also be vastly different from the current class sail material and construction, so we knew it was important to prove that it would be dramatically better.


With our materials chosen, we fine-tuned our model to match the cloth. For the paneled designs, the goal was to optimize the shape through broad seaming and luff curves. For the 3Di sails, we leaned on WARPS™ for a layout that would maximize durability. We looked at both element strain and yarn strain in the model, which we can control well with 3Di.

Why 3Di tested better than paneled sails

When modeling, strain maps highlight "hot-spots:" areas where the element strain (a measure of the movement in the cloth) is too high relative to yarn strain (a measure of the tensions in the yarns). Small tweaks in tape layout may help one map but hurt the other, so we run the model until we strike the optimal balance. The strains don't have to be brought down to zero; they just have to match each other.

Tension is the enemy of sail shape, and the key to designing a versatile, predictable sail is to align that tension with the direction of movement. Like an elastic, the more a sail is stretched against the yarn path, the less likely it is to come back to its intended shape. By optimizing tape materials and orientations, 3Di allows us to minimize distortion under load, which will help with consistency, performance, and longevity.

On paneled sails, the yarn strain is high but the element strain is low—especially in the main. That means the sails are pliable, but they will change shape over time.

When compared to the 3Di sails, the original 49er main showed the element strain to be high in the upper third of the sail. Based on our experiences, this led us to add more bias support and use tapes at different angles from our standard load path layout. That settled the element strain map and made it more consistent with the yarn strain map.

On the paneled main and jib, the map showed high yarn strain up the luff of both sails. There wasn't much we could do about that in the paneled sails, but in the 3Di sail we added a Helix structured luff group to both main and jib. That settled the yarn strain map and brought it more in line with the element strain map.

A 3Di main that uses a custom-engineered layout and a 3Di jib that uses the standard load path layout best matched the maps of the element and yarn strains. And by settling the luff loads, the Helix luff structure would make the cunningham and halyard more effective.

No detail is too small

After developing prototype designs that fulfilled our primary goals, it was time to look at the small but important details that contribute to overall performance.

The tack flap connection in the main was noted as an area of high load and distortion since it is the point of convergence for the two tack flaps and the bottom batten. We reinforced it in the paneled sails, and then re-thought it in the 3Di sails to be all one piece. That single structure will transfer cunningham load to the head of the sail, eliminating a high failure and wear point.

Next, we built prototype sails in both paneled and 3Di, and we invited several experts to go sailing.

Sail Testing

With the help of 18' Skiff expert Matt Steven, the prototypes were put to work by the top New Zealand 49er teams. After several on the water testing sessions, the simulations we'd run in the North Design Suite were validated.

With the help of 18' Skiff expert Matt Steven, the prototypes were put to work by the top New Zealand 49er teams. After several on the water testing sessions, the simulations we'd run in the North Design Suite were validated.

We were very pleased with the performance of all the new sails against the current designs. Both paneled and 3Di held their shapes and were more consistent than the class standard, though as we predicted the 3Di sails were smoother, more consistent, and held their shapes better. Shortly after our testing sessions, our recommendation that the class adopt 3Di was accepted.

For both training and regattas leading up to the 2024 Olympics, 49er and FX sailors now have a much better option for sails: 3Di mains and jibs. They will be built with the same sail technology used to make identical sails for one design classes such as the Volvo 65s, AC50s, Moth and Melges 20; a constant and replicable taping and mold, followed by a consistent layout and finishing team. We met our project goals in order to help you meet yours—another example of the North Sails scientific approach to sailmaking.

Testimonials: Longevity

18ft Skiff - In four years, David McDiarmid's Honda Racing earned the JJ titles, widely recognized as the 18' Skiff's World Championship. The team accomplished this with one set of 3Di sails. Between training and races, these sails saw thousands of hours on the water.

Moth - The class has almost entirely switched to 3Di sail, which like the 49er, is a full battened mainsail with very high loads. Most of the sailors buy one sail a year and use it for all of their major events. Comparatively, sailors would go through 2-3 paneled sails per in advance of each major event. Tom Slingsby says: "The North 3Di Moth sail has a longer durability than any sail on the market I had previously used, and any sail currently on the market. If I was heading into a world title this year, I would have no issue using the sail I used to win the 2019 World Championship. The life of the sail is outstanding."

Around the World Ocean Racing - North 3Di has been tested through hundreds of thousand hours and offshore miles. Whether the one design Volvo 65, the latest generation IMOCA or the awe-inspiring Ultim trimarans, 3Di is made to outlast the adventure. For example, the sails used by Thomas Coville in his 2016 around the world record were used for a year and a half of training and practice leading up to his attempt. He reported no sail failures in the 42 day trip around the world.

Related Articles

Bluebottle - The Queen's Dragon
A wedding gift from the Island Sailing Club to the-then Princess Elizabeth "Take the measurement certificate, for example, it says the owner, and it's... well, Her Majesty the Queen. So, when you go to the regatta office to register [your entry] and they're looking at it... they're taking photographs and they can't believe it." Posted on 18 Jul
John Bacon - from 5.5m sailor to IRC racer
Taking on the world with North Sails World Champion yachtsman John Bacon has put many successful racing programs together, and his next few months of sailing is no exception. Posted on 3 Jul
North Sails powers the Newport Bermuda Race 2022
This year marked the 52nd edition of this East Coast offshore classic The Newport Bermuda Race has kept North Sails buzzing (and busy!) since well before the 186-boat fleet set off on June 17th. This year marked the 52nd edition of this East Coast offshore classic and the return of racing after a canceled 2020 event. Posted on 27 Jun
North Sails: behind the scenes with Loft 57
Loft 57 is a conversational podcast that opens the doors to North Sails Loft 57 is a conversational podcast that opens the doors to North Sails, the world's leading sailmaker. With host Ken Read, this series goes behind the scenes with product creators and the passionate sailors who trust North Sails to power their adventures Posted on 16 Jun
North Sails roster bolstered with Bouwe Bekking
One of the sport's most experienced offshore/trans-oceanic sailors joins North Sails North Sails has announced that Bouwe Bekking has joined the brand to support their Grand Prix division. Bekking is considered one of the world's most accomplished and experienced sailors. Posted on 7 Jun
Ian Walker joins the North Sails Management Team
Olympic Medalist and Volvo Ocean Race winner named North Sails UK General Manager North Sails is excited to welcome world-renown sailor Ian Walker to their management team. Walker is a two-time Olympic medalist, an America's Cup veteran, and winner of the Volvo Ocean Race 2014-15 as skipper of Abu Dhabi Ocean Racing. Posted on 10 May
North Sails expands Palma Sales & Service facility
One all-purpose site elevates customer service to unprecedented levels North Sails has strategically relocated all their sales and service into one Palma location. Effective immediately the secondary loft space in Llucmajor is closed with all loft functions now concentrated within the Palma loft Posted on 27 Apr
North Sails supports the RC35 Class in Scotland
A busy season awaits for the tight rating band Racer-Cruiser yachts The RC35 encompasses Racer-Cruiser yachts in Scotland with an IRC Banding of 1.010 to 1.040. They also attract teams over from Ireland thanks to the Irish events on the circuit. Posted on 24 Mar
North Sails Wireless Load Sensing for Helix Sails
Harnessing the latest wireless technology to maximize the benefits of Helix with this simple upgrade Having recently made the Helix design standard on all racing Code sails, North Sails now moves to digitize the Helix range - harnessing the latest wireless technology to maximize the benefits of Helix with this simple upgrade. Posted on 15 Feb
Rig tuning with Andy Rice and Charlie Cumbley
North Sails one design expert Charlie Cumbley joins Andy Rice to discuss Etchells and J70 rig tune Join North Sails One Design Expert Charlie Cumbley joins Andy Rice from to share the art and science behind optimal rig tuning and boat setup. Posted on 19 Jan
North Sails 2021 Innovation - FOOTER