Please select your home edition
Sea Sure 2021 - RED - LEADERBOARD

Competition Spec Equipment - Sea Sure's new RED Performance range

by Daniel Henderson, Sea Sure 21 Jan 08:15 PST
Sea Sure RED Performance range - pintles and gudgeons © Sea Sure

As an equipment manufacturer we are always on the lookout for feedback and ideas from sailors so that we can make new products or changes to existing ones. As we find in most sports at the top level, products get pushed to their maximum and sometimes standard components can break as they are being used harder or in a different way to what they were originally intended. For this reason, we have started to put together a range of products that will now be known as the "competition range".

The first of our products that we chose to work on were our transom products.

Sea Sure transom fittings are regarded by dinghy sailors across the globe and at every level in the sport as the go to product when it comes to dinghy transom fittings. Our pintles and gudgeons are fitted by top dinghy builders such as, Ovington, Devoti, RS, Topper & Hartley to name a few as the standard fit out across many classes.

Our transom range has remained unchanged for over 20 years as we have had very few pintle failures. Unfortunately, there was one failure that spurred us on to enhance our offering in the transom product range. A British Olympian had a pintle failure at the Palma world cup that cost him a gold medal. After this incident the first thing that we needed to do was analyse the pintle to see where it broke and if there were any clues as to why it happened.

We analysed the pintle pin and footage of a Finn sailing downwind with Olympic coach Derek Clark and found that the steering and rocking motion that the sailor inputs into the boat/helm to sail the boat efficiently down wind was putting fore and aft, and side to side stress on the pintle pin, resulting in fatigue. For this reason, we have designed the "RED Performance Range".

The new RED Performance range is available with 8mm pins and holes and fits directly into the same hole patterns as the standard range, making it easy to upgrade. But what is the key difference other than the striking colour?

Each pintle has 2 grub screws that enables you to remove the pin from the aluminium extrusion. This allows you to check for cracks, bends or fatigue across the whole length of the pin so that you can be confident before going on the water that you won't suffer a failure.

Once you have checked the pin you can either reinstall it or replace the pin. This means that you can change a pintle without having to remove the aluminium component from the back of the boat or rudder which in some cases can be quite difficult and time consuming. If you travel with your boat and attach the lighting board to your transom fittings, then this range is definitely for you. The added vibration caused by the road surface can fatigue a pintle far quicker, so it is best to change the pin more frequently.

The red range is a great option for serious campaigners or club sailors that use their boats most weekends and do not want to suffer failures at events. A spare pintle pin is a low-cost addition to the toolbox at only £9.50 and enables you to change a pin within a couple of minutes.

We are currently offering up to 20% discount on our RED Performance range at

Related Articles

It's Friday again... but not any Friday
Up to 15% off across all Sea Sure affiliated brands Up to 15% off across all Sea Sure affiliated brands for Black Friday 2021. This covers Blacks & Taylors, WBV Shock Mitigation Solutions, and Sea Sure too. Posted on 26 Nov
We speak to Daniel Henderson and see a slow-motion demonstration of Omega in action! Mark Jardine chats to Sea Sure's Daniel Henderson about the SHOCK-WBV and Omega shock mitigation units, with a slow-motion demonstration of Omega. Posted on 18 Nov
IBEX debut for Shock-WBV, P Series
Quick and easy to install Shock Mitigation Units Lightweight, compact P Series units bolt directly to a standard pedestal and leisure chair to make new or retrofit installations quick and easy. The bolt pattern has slots and will fit almost any chair. Posted on 23 Sep
SHOCK-WBV takes 1st & 2nd
At the BPRC Cowes Poole Cowes Offshore Power boat race World renowned powerboat designer Adam Younger and crew Amy Rickards took 1st place in the 93.70nm offshore powerboat race from Cowes to Poole and back. Adams new Northstar RIB's UK powerboat features 2 SHOCK-WBV C series suspension mechanisms. Posted on 6 Sep
How Sea Sure came to make the Firefly rudder stock
The team racing flights of Fireflys get put through a lot! For those of you that have tried your hand at Team Racing, you will know that those poor flights of Fireflys get put through a lot! Posted on 26 Jul
Hurco CNC machine raises productivity at Sea Sure
Investment in new machining centre to keep up with demand for SHOCK-WBV products Graham Brown, managing director of Sea Sure Ltd, a boat fittings and accessories design, development and manufacturing specialist in Warsash, Southampton, bought his wife Judith a Merry Fisher powerboat nearly 10 years ago. Posted on 20 Jul
Ultimate Marine & HCB use SHOCK-WBV P series units
Sea Sure's seating aboard possibly one of the hottest powerboats of the year Possibly one of the hottest powerboats of the year to come out of Ultimate Marine & HCB in the USA is using SHOCK-WBV P series units for its seating. Posted on 13 May
Drop Nose Pins
What are they and why use them? A drop nose pin is a pin that can be used for securing or attaching components. They can be used in a number of places around a boat, but why would you use a drop nose pin instead on a clevis pin or bolt? Posted on 14 Apr
Sea Sure Dinghy Show Weekend Offers
15% off across the whole site until 5pm on the 1st March We are running 15% off across the whole site ( until 5pm on the 1st March when you use the discount code "DINGHYSHOW21" at checkout. Posted on 26 Feb
America's Cup highlights need for shock mitigation
Sea Sure developed its Shock-WBV for wind-over-tide, fast, harsh wave patterns The America's Cup has highlighted the increasing need for shock mitigation suspension seating as spectator and support boats struggle to keep up with the amazing speeds these new machines get up to out on the water. Posted on 12 Feb
Sea Sure 2020 - FOOTERSea Sure 2020 - SHOCK-WBV - FOOTERSea Sure 2021 - FLO - FOOTER