Please select your home edition
SW newsletters (top)

Peter Harken: "Winning is in the details. So we tend to think a lot about them."

by Peter Harken, Harken Chairman 2 Oct 2020 04:00 PDT
NYYC American Magic's AC75 DEFIANT training in Auckland © Will Ricketson / NYYC American Magic

I was looking at some photos a couple days ago, taken by American Magic at speed aboard "Defiant," their first AC75 boat they've shipped to Auckland. It's sailing on the same race courses that will be used in the America's Cup match next March.

Those first-generation boats are really impressive. It's amazing that not one of them blasting around out there will even be racing next spring, the learning curve in this new class is so steep. The Gen-2 boats will fly more consistently and maneuver even better--bet on that. It's incredible how much learning has been going on behind the scenes.

These days, so much of the rigging is below deck-level that we usually can't see what's rigged where when we look at photos taken from off the boat. Even the winches with Harken on them we formerly saw on every tack are invisible, now down out of the airflow. But these images were good for our engineering souls. There were shots of one of the several custom, titanium main traveler cars we've made—and re-made. There were several of our white Harken Air winch 550s with grinders at full speed. But then, there was one shot in particular that caught my eye. It gives incredible insight into the detailed attention the riggers pay to EVERYTHING on the boats at this level.

That picture was not of our most sophisticated grand prix gear. It was just two of our 29 mm Carbo blocks soft-attached simply, with a custom-spliced soft loop shackle inside the aft end of a soft fairing of carbon sailcloth extending between the boom and the top of the deck where it must reduce turbulence and provide endplate effect between sail and deck. First things first: It was clear that this fairing has seen a bunch of very fast passes! Looking closely, the thread's ends are all frayed. Weeks and miles of blasting around at over 40 knots will do that. Ahh, the life of a piece of practical equipment on the development boat! More details: The tail on those soft loops is a little longer than it probably needs to be. But that tail is wrapped with clear tape so the extra length is intentional. They might need to extend the loops to lower the blocks...after all, everything is a work in progress three months out from the first test event.

Through the blocks, the team rigged thick shock cord. We can't see where that shock cord goes, but I'm going to speculate...they probably want constant tension to make that fairing fit consistently as it moves across the boat in the tacks and as those two-sided soft foil mains invert, so maybe the bottom end rides on a car on the traveler track. That probably seems a lot of attention to pay to just one picture. But this is the stuff we wonder about in the run-up to the Cup when New Zealand is in lockdown, and all we can do is...wonder.

That picture tells you a little about how we do things within our company. We don't look at pictures like 'normal' people. We don't look at equipment the same way either. We kinda look through what's in the shots, past the outside of the cleats or the blocks, and see the thinking that's gone on underneath—right to the solution to the problem.

The October issue of At The Front is a tribute to the attention paid to precise execution—at Harken and by the sailors. You'll see how much care US Olympians Riley Gibbs and Anna Weis, who are sailing the Nacra 17 in the next Olympics, devote to their rigging decisions. You'll see how we make custom stuff. And I'm in there later thinking about our "Boulevard of Broken Dreams" where we thought our detailed thinking was going to result in breakthrough products the public was going to love, and we were very wrong! We were thinking a generation too far ahead and the present public didn't care--and didn't buy. So a 'dream' was designed, built, and it worked but swiftly died. Yeah, let's go with that! Hope you enjoy the issue.

Read the October issue of At The Front here.

Related Articles

15% off Winches, 10% off Furlers at Harken UK
Offers running in line with Southampton International Boat Show This autumn, Harken UK is offering discount on furlers and winches for a limited time only! These offers run in line with Southampton International Boat Show, which takes place at Mayflower Park from 10-19 September. Posted on 3 Sep
Harken UK's Cowes Week Regatta Support
Drop off service in Lymington, Hamble and Southampton for parts and equipment With the countdown on to Cowes Week, the Harken UK team is determined to do all we can to help customers stay out on the water and enjoy their sailing. Posted on 28 Jul
Harken Product Focus: MKIV Ocean Furler
Designed and manufactured specifically for cruising sailors Furlers have come a long way in recent years, driven by their uptake in racing as technology allowed them to be used in a greater range of wind angles and conditions. Harken have been at the forefront of this uptake. Posted on 28 May
Harken UK Job Opportunity: Marine Account Manager
Harken are looking for an experienced account manager to join the team This position will suit someone who has a couple of years sales experience in the marine industry and is looking to take the next step in their career. Posted on 10 May
Winning the Y88 Nats a family day out for Barkers
Dean Barker put together a crew that included yachting icons and his daughter to win the Y88 Nats. Last weekend's Harken Young eight8 Nationals followed hot on the heels of the Southern Champs held in Lyttleton a week prior. Both events featured a quality fleet of fifteen boats, challenging conditions, and world class talent. Posted on 21 Apr
Gizmos: Harken's growing line of rigging solutions
Engineered soft-attach terminations and through-deck pieces Harken now offers Gizmos, a growing line of engineered soft-attach terminations and through-deck pieces. Gizmos acknowledge riggers' desires to minimize weight and eliminate as much heavy metal as possible. Posted on 20 Apr
Harken Product Focus: The CLR Winch
An uncluttered deck is the goal of every yacht owner and boat captain An uncluttered deck is the goal of every yacht owner and boat captain, and Harken are constantly innovating to help them achieve that goal. The CLR Winch provides a new option for yacht architects to maintain form without compromising on function. Posted on 16 Mar
The Vendée Globe: Out there all alone
With 2,000,000 people hanging on your every gybe There's nothing like following this race in France. The distance is estimated at 40,075 kilometers or 21,638 miles. In reality, during the seven previous editions of the race, competitors have sometimes covered more than 52,000 kilometers (28,000 miles)! Posted on 1 Nov 2020
Harken US Sailboat Show press briefing
Harken is excited about keeping our annual tradition alive Harken is excited about keeping our annual tradition alive by holding a press briefing the opening morning of what would have been the United States Sailboat Show on Thursday, October 8. Posted on 1 Oct 2020
MBW newsletters (top)