Please select your home edition
Clipper Ventures

INEOS Team UK Moving Parts: Lead Systems Engineer Andy 'Animal' McLean

by INEOS TEAM UK 9 Jul 06:42 PDT
Lead Systems Engineer Andy McLean © Lloyd Images

Andrew 'Animal' McLean is both a highly experienced inshore and offshore racer as well as a qualified mechanical engineer. He has a vast amount of experience, having competed for four America's Cups and in two editions of the Volvo Ocean Race (VOR). All that experience in both sailing and engineering has led him to his current role as Lead Systems Engineer at INEOS TEAM UK.

Although born in New Zealand, that is not where Andrew first fell in love with sailing. "We left New Zealand when I was one and we moved to Brunei. My Dad went there as an engineer and my Mum got a teaching job at the International School we attended. I grew up there until I was nine. That's where I first started sailing, it was uncommon around there, but we sailed quite a bit, cruising around the islands in little 28 footers on the weekends."

At the age of nine Andrew and his family moved back home to New Zealand, to Wellington. There, inspired by his father, his passion for sailing took on another level.

"Like most New Zealanders my Dad always owned a boat. Nothing flash but something we could always go sailing in. In Wellington my dad owned a keelboat, a 30 footer. We'd sail in them and race them. We used to race in the winter series. Those were some of the biggest waves I had ever seen - I remember being terrified sometimes!"

After years of sailing as a hobby Andrew's road into a future in professional sailing began when he joined the Royal New Zealand Yacht Squadron Youth Training Programme - a well-trodden route in New Zealand.

By that point Andrew knew his dream was to work in the marine industry and in particular in sailing. He opted to study engineering in Auckland due to the strength of their yacht research programme. He quickly educated himself in relevant fields such as computational techniques, engineering and composite engineering. At the same time, he began working in Auckland's world-renowned marine industry with North Sails Group and Southern Spars.

Andrew's hard work immediately paid off when straight out of University he was offered a dream job, he was hired by Emirates Team New Zealand (ETNZ) in 2001 to write the visualisation tools for the weather team for their America's Cup Challenge. The role with ENTZ was the start of a pattern for Andrew. A pattern of sailing and racing, while working at the cutting edge of technology and development.

"I did a couple of days sailing with them, but I was about 75KG and not physically strong enough. I was blown away by those boats though and sailing with the best in the world with the national flag on our gear was something I really wanted to do more of".

After the 2003 America's Cup, not a particularly great Cup for the Kiwis who ultimately lost 5-0 to the Swiss team, Alinghi, Andrew went back to Southern Spars and worked on several R&D projects. When the campaign for the following Cup kick-started again, however, Andrew knew exactly what he wanted; to challenge for the Cup again, but this time as a full-time member of the sailing team.

"I joined the next campaign with ETNZ very early. I got a job straight away doing reconnaissance but when I had a meeting with Dalts [Grant Dalton, CEO at ETNZ] he asked me what I wanted to be doing and I immediately replied, "I want to be a sailor". He said "you won't get on the boat unless you're 100KGs" so that's what I did. I went away and I trained like hell. I was putting on about half a kilo a week. I came back to the team at 100KG and then Dalts had to give me a sailing role!".

The 2007 America's Cup was more successful for the New Zealand team, losing a close-fought rematch with Alinghi 5-2. By now, Andrew was well established, and signed again for the next Cup cycle. Due to a row over format, rules and boats which lasted for three years, however, that Cup was significantly delayed. Andrew had no choice but to move on. After a stint in the Extreme Racing Series he moved to fully-crewed ocean racing and sailed in the Volvo Ocean Race (VOR) with Ian Walker.

"I'd always wanted to do ocean racing. I did a lot of distance racing out of Auckland. It was a lot of fun. I'd always done quite a bit of navigating, and I'd spent a lot of time with the weather teams [at ENTZ], so I had quite a good handle on that side of racing. I had experience running and maintaining complex systems and enjoyed working hard so the endurance racing was a perfect fit."

After two Volvo Ocean Races Andrew found himself once again, in 2012, returning to the America's Cup with Swedish team Artemis Racing to work on the system control software.

By the end of the 34th Cup, Andrew had another choice between carrying on to the next Cup or going back to offshore racing. "I was really tempted by the VOR again especially with some exciting teams announcing, but I got a phone call and they said, 'Do you want to do the Cup with Ben Ainslie Racing?' I said yes. The thought of designing and building a new development class from scratch was attractive."

"I signed as a sailor, but quickly got involved in the design side offering feedback and input from the sailing side, it got a bit out of hand from there, eventually leading the systems group."

Andrew's remit with the team now sees him look after the control systems on board Britannia. That includes the hydraulics, the electronics and all the foil actuators. In short, he manages all the control systems that keep the sails under control and keep the boat in the sky when foiling. For Andrew, who's career in sailing has seen him work on both the sailing and the engineering side, it is a perfect role.

"In an America's Cup team it is critical that there is a link between the technology side and the sailors, that is my role now. That technological side of the America's Cup is more important than ever before with these AC75s. The control systems on board used to be just a couple of wires measuring the wind and now it's almost life critical hardware in that if it fails, people get injured. There's been a massive shift.

"The America's Cup, of course, is fundamentally still a yacht race but it's a bit of a departure from mainstream sailing. The Cup has always been on the cutting-edge of technology and these yachts now are more akin to Formula 1 cars or fighter jets. It's very complex but also very rewarding from an engineering point of view.

"On the AC75s, for example, there are control systems that control the flaps on the wings, the rudder elevator at the back, the board arms, and then within the wing there are probably ten or so more control functions. There are about 26 hydraulic actuators on boat. There is a lot of intricate work to do, from all the hydraulic work through to working out the balance between what the sailors are controlling and how they interface with those machines, and what the computers are controlling"

The level of complexity means that there is simply a tremendous amount of work to do to ensure the boat is as reliable as possible. The number of tasks on Andrew's job list can run into the thousands. Ultimately, as is always the case in the America's Cup, if there is one thing Andrew would want more of, it would be time.

"In the America's Cup you simply run out of time. Everyone does. It's all about how efficient you operate as a team in the time you have that will win the Cup for you. It's about the teamwork and the 150 people all working together for a common goal. The overall goal may be clear but if everyone is not clear what they are doing on a week-by-week basis, that is where teams can stumble. If one cog in the wheel misses something, the whole machine stops. If one small piece of metal is floating around in the control systems, we could lose a sailing day. My job list can be very long but it's all about picking out what's important at any given time whilst anticipating what other people are working on to make sure you do not hold anyone else up.

"In the old days I could look at an America's Cup boat and know how everything worked on that thing. Nowadays the boats have moved on so far that it has to be a real team effort across the board to get it working reliably. In the end it's that team environment that wins you the America's Cup."

The America's Cup may be a complex team challenge that requires a huge amount of effort and hours but for Andrew, who has been preparing for this his whole life, it is exactly the type of challenge he enjoys.

"We are in a competition and everyone in the team is motivated and driving towards winning the Cup, I find that fun to be around. Then alongside that the technical side of the sport has always appealed to me. I saved up for that first dinghy and then worked on it with dad in the garage - we stripped it down and worked out how to make it better and faster, the whole process of developing and racing was fun. There is that whole side to sailing and that's what I enjoy the most."

Related Articles

INEOS TEAM UK christen 'Britannia'
The boat the team will race in the America's Cup INEOS TEAM UK has officially christened their America's Cup race boat 'Britannia' from the team's base in Auckland, New Zealand, three months before the start of racing for the 36th America's Cup. Posted on 16 Oct
BBC Click: The America's Cup And INEOS TEAM UK
Spencer Kelly talks to Ben Ainslie and other members of the team The America's Cup is one of the biggest and toughest sailing races in the world. BBC Click take a look at what goes into making a boat to compete, talking with Sir Ben Ainslie and members of INEOS TEAM UK. Posted on 12 Oct
INEOS TEAM UK's RB2 arrives in New Zealand
Britain's race boat for the 36th America's Cup at the team's base in Auckland The second race boat built by INEOS TEAM UK in their bid to win the 36th America's Cup has landed in Auckland, New Zealand. Posted on 1 Oct
INEOS TEAM UK's new race boat heads for NZ
Code Name 'RB2' on a four-day journey aboard an Antonov cargo plane The second race boat built by INEOS TEAM UK in their bid to win the America's Cup, sport's oldest international trophy, is bound for New Zealand. Posted on 28 Sep
Sir Robin Knox-Johnston takes flight on Britannia
First foil for the first person to sail single-handed non-stop around the globe Sir Ben Ainslie and the INEOS TEAM UK sailors take Sir Robin Knox-Johnston, the first person to sail single-handed non-stop around the globe in 1969 (312 days solo at sea!), for his first foil. Posted on 25 Jul
David Carr describes the Britannia I deck layout
Some of what goes in to designing INEOS Team UK's AC75 It is mission-critical to maximise efficiency in the cockpit of Britannia both in aerodynamics and in creating the best performance positions for the crew. Posted on 25 Jun
Revolutionising AC75 boat development process
INEOS TEAM UK and Coderus create game-changing new software INEOS TEAM UK and team software design partner Coderus have developed a game-changing new software that greatly improves the speed and accuracy with which innovation and design creativity can be handled in the boat design development process. Posted on 11 Jun
INEOS Team UK back out on the water
Britannia flying once again in the Solent After three months off the water due to the COVID-19 pandemic, Britannia is flying once again. The past few months have been a difficult time for the team, as it has been for everyone around the world. Posted on 6 Jun
Video: Meet INEOS Team UK designer Ollie Pendleton
Moving Parts is an INEOS TEAM UK series looking at the work of different team members. Moving Parts is an INEOS TEAM UK series looking at the invaluable work of different members from across the team. This time we are looking at a member of the design team, Oliver ‘Ollie' Pendleton. Posted on 4 Apr
Meet INEOS TEAM UK Sailing Team Coach Rob Wilson
The role long-term Rob Wilson has been sailing most of his life, and competed against (and beat) Ben Ainslie during an Optimist World Championship in Japan when he was 12 years old. Posted on 2 Apr
Highfield Boats - Sailing - FOOTERCyclops Marine 2020 - FOOTERNorth Sails 2019 - NSVictoryList - Footer