Please select your home edition
upffront 2018 Millionaires Tape 728x90

Trogear Bowsprits - A good enough reason to drill a hole through your bow

by Aleix Escorsell 11 Dec 2019 01:00 PST
Trogear Adjustable Bowsprit © Louis Benainous

Here at Upffront, we talk a lot about asymmetric sails and code zeros, and with good reason! Faster and more manageable, these are a popular choice among many sailors, with one caveat, they require a tack point for the drum forward of the forestay, which preferably means a bowsprit.

While most modern, performance sail boats have permanent bowsprits attached, many older boats require modification to install a bowsprit and get those precious few extra feet on the bow.

This blog will highlight the four most common methods of retrofitting a bowsprit to your boat and some of the advantages of Trogear's adjustable A-Frame design.

1. Custom

Any good refit yard will be able to design and install a custom bowsprit on to your boat. This will certainly ensure a clean and professional finish and you can customize your bowsprit, both functionally and aesthetically to be the best fit for your boat and sailing systems. For example, the one pictured below has been customised to include an anchor. But, as with all custom boat developments, this is the most costly solution because it requires the help of a number of specialists to design/engineer, build and install the bowsprit.

2. Through hull

A common solution amongst smaller sportsboats. Cheaper than a full custom sprit, due to the use of an off the shelf carbon or aluminium tube section, however, it is still a significant task for a professional boatbuilder to retrofit. Whilst they have the advantage of being retractable the downside is the impact on space and/or structure below deck.

3. On-deck

The natural progression from the through-hull option is to simply add your bowsprit to your boat directly on the foredeck. A significant advantage of these systems is that they are easily fitted and the sprit can be extended or retracted as needed. The downsides are that it can often be difficult to find a clear path across the foredeck, past the forestay and any anchor hardware. They also take up quite a bit of deck space when retracted and are the least aesthetically pleasing option. However, with the right bow setup this is definitely the easiest and most cost-effective method for many boats.

4. Trogear solution

Enter the Trogear A-Frame bowsprit which has been specifically designed to address the problems of on-deck systems whilst being relatively easy for amateurs to install. Comprising of an articulating A-frame carbon fibre design it can be mounted neatly on your bow and offers an affordable solution with the majority of the benefits of a fully custom bowsprit.

Like the through-hull and above-deck bowsprits, the Trogear can be retracted (raised) when not in use or removed completely. It is considerably lighter than many on-deck alternatives which makes it easy to adjust and very versatile, whilst its solid A-frame construction make it strong, durable and reliable.

Whilst there are a range of external attachment options (hull or deck mounts) the recommended solution requires a hole to be drilled through your bow!

The idea of drilling a hole through your bow might seem counter-intuitive to many, however, in reality, it is a relatively easy installation. With the right amount of patience and careful measurement, it can be completed by an amateur with only a few tools and Trogear's detailed and helpful installation guide.

Long story short: after preparing your two through-hull holes, a bearing tube is bonded / sealed between the two hulls on the inside, which allows the base of the A-Frame to pass through the bow area and articulate freely without any chance of water ingress.

The limiting factor for this installation method is if you have any under-deck furling gear or other structure in the bow area, in which case you can look at external attachments. The other potential issue is your bow-mounted anchor / anchor roller, however, custom installations are possible to work on/around your existing anchor hardware.

Trogear bowsprits come in four standard sizes for boats from 25-50ft with larger, custom sizes available on request.

Further Information

We have a great blog if you want to learn more about the Trogear Bowsprit and its applications.

Already installed your bowsprit? Head over to our blog on rigging the bobstay to get the most out of your Trogear bowsprit.

Looking for a bowsprit?

Browse Trogear Bowsprits or make an enquiry about bowsprits if you would like help to determine the best product for your needs.

Related Articles

Join on the Foredeck
Get a free 50 Euro voucher when you join this exclusive club With the launch of the all-new website we are also pleased to present the Foredeck Club, exclusively for boat owners who are serious about their sailing. Posted today at 11:00 am
Andersen Winch
Laser focus on a simple, reliable, high-quality design As part of the Ronstan brand, Andersen are 100% focused on providing simple, reliable high quality sailing winches. Anderson made the decision early on to focus on one standard range and do it well. Posted on 26 Mar
Adding a Bowsprit 'Turbo Charge'
What is the Facnor Bowsprit? Facnor is a specialist in designing and manufacturing furling systems, and therefore it should come as no surprise that they have a retrofit bowsprit solution. Posted on 18 Mar
What's so special about the Ronstan Orbit Range?
An in-depth look from Well known around the world, Ronstan is a great choice for blocks and sheaves for a variety of sailors. They have developed a number of ranges from the basic Utility range to the advanced precision Orbit range. Posted on 12 Mar
Can Upffront become sailing's
Andy Rice interviews managing director Phil Anniss Upffront has created a few ripples in the marine industry since the company launched in 2015. However, the online supplier of performance hardware and rigging systems is looking to make much bigger waves in 2020. Posted on 4 Mar
Gotifreddi Maffioli cruising lines explained
A vast range of very specialist cores and covers Family run, Italian rope makers, Gottifredi Maffioli, have an international reputation as one of the leading brands across the full spectrum of yachting lines from Olympic class dinghies, grand-prix TP52s and mini-maxis to the largest superyachts. Posted on 27 Feb
Karver's double whammy at the DAME Awards
Compact winch and carbon handle applauded in Amsterdam The Dame Awards are the leisure marine industry's equivalent to the Oscars, awarded every year at the Marine Equipment Trade Show (METS), held in Amsterdam each November. Posted on 19 Feb
Local Ropemaker to America's Cup Supplier
How did little Italian rope producer Armare make it to the top? Despite being a small, family-run business, Armare Ropes are operating at the top of their game. Posted on 13 Feb
Robline Rope Cruising Ranges Explained
How to choose which range you need The success of Robline as an international rope brand is based on decades of expertise in manufacturing fibre ropes, the experience of professional sailors in the company, and the intensive collaboration with Olympic gold medallists. Posted on 5 Feb
nke Depth and Speed sensors explained
nke are the standard for the majority of Mini-Transat and IMOCA 60 classes The marine industry has been awash with new and exciting technological innovations in recent years and standing at the forefront are companies like nke marine electronics. Posted on 30 Jan
MBW newsletters (top)