Please select your home edition
Edition
SW newsletters (top)

Wessex Resins & Adhesives product of the month: G/flex 650 Epoxy

by Jake Kavanagh 28 Dec 2018 01:00 PST
The G/flex range is available in several sizes and in two different types, thickened (655) and unthickened (650) - Six10 is gap-filling adhesive that self-mixes in the nozzle © WSI

What is it? G/flex 650 Epoxy is described as a 'toughened, resilient two-part epoxy engineered for a superior grip to metals, plastics, glass, masonry, fibreglass and wet and difficult-to-bond woods.'

Used for? Basically, all those difficult jobs, the bonds most likely to fail after using standard DIY adhesives. Typical examples would be where there are going to be stresses from expansion, contraction, shock or vibration. It is also good for bonding different density materials that are traditionally hard to glue together. These include attaching the PVC tubes of an inflatable to a GRP transom, or closed cell foam insulation to a curved bulkhead. If the job is a tricky one, G/flex 650 or the thickened 655 is most likely to be the answer.

Mixing ratio? A very simple 1:1 mix ratio by volume, or 1.2 parts of resin to 1 part hardener by weight. This will give a pot life of 45 minutes and a long 'open' time of 75 minutes at room temperature. The initial cure is reached in 3-4 hours, with a workable cure in 7-10 hours depending on the temperature. Getting the ratios spot on will ensure the most effective bond.

Hamish's tips

"G/flex 650 is available in two distinct types, 650 Epoxy and the pre-thickened 655 Epoxy Adhesive. Both will produce a really strong bond, even to exotic materials. As the name suggests, the bond will tolerate a lot of flexing."

Use 650 for fabrics and metals

"The G/flex range was developed by the Gougeon Brothers to tackle some of the most difficult bonding challenges. The standard 650 Epoxy is a liquid resin and hardener, to which you can mix some additives such as colloidal silica if necessary. In its unaltered state, G/flex 650 Epoxy is excellent at bonding fabrics such as kevlar,carbon fibre and aramids to substrates like GRP, polypropylene or glass. (If the driving mirror in your car has fallen off the windscreen, reach for the G/flex). It is often used to add reinforcing pads to the inside of white water canoes, as it flexes easily when the canoe hits a rock, or is twisted by powerful currents."

Hamish also says that G/flex 650 was designed to tackle a very American problem, opening seams in metal boats.

"The US has vast numbers of aluminium boats, which are builtusing rivets. As the hulls wear the rivets work loose and water can get in. G/flex 650 is perfect for injecting into the rivet holes or along opening seams, to make a flexible watertight seal. The treatment also helps prevent any further degradation."

Use 655 Epoxy Adhesive for mainstream bonding

"The 655 version is G/flex 650 thickened to make it more useful for bonding applications," Hamish says. "Typical uses would be on foams, wood to glass, or any job where a thicker adhesive will produce better results. We know lots of people who have used it to successfully bond the soles of their work boots back on, as the cured epoxy can move with the rubber and leather."

The flexibility of the cured product is what makes it so versatile.

"The cured product is really robust," Hamish says. "You can hit it repeatedly with a hammer and it won't shatter. Check out the YouTube video of a canoe being cut in half and then bonded back together using G/flex 655. It is back in action the very next day and as strong as it was before."

A typical bonding job

A 25mm high density closed-cell foam needs to be bonded to a GRP minor partition. The GRP has been prepared with cleaning and abrasive sanding.

G/flex 650 Epoxy, it is a liquid but can be thickened with 406 Colloidal Silica additive for a thickened glue. However, this consistency is adequate for our needs.

The epoxy allows the foam to be quite easily moved around on the substrate and the 75 minutes of 'open' (workable) time allows for plenty of repositioning and adjustment.

As a little bit is left over, it is used to repair a set of old car keys where the metal shank has come adrift from its plastic keeper. If you are unsure of the quantities you need, then having a couple of other jobs ready means that nothing is wasted.

(Eagle-eyed readers will note that this is a larger partition and one we made earlier).

Unlike impact or 'contact' adhesives, this will not be affected by temperature. Some impact glues, especially those that get used for jobs in an engine-rooms, can loosen in excessive heat but the 650 will remain rock solid.

G/flex information: westsysteminternational.com/en/west-system/west-system-g-flex-epoxy

Related Articles

Building an 18th century Gajeta part 9
Amazing beauty of an old wooden design built with modern epoxy resin As you'll know, we've run a series on the build of a wooden Gajeta with epoxy resin at the Betina Shipyard in Croatia. In this final instalment we look back at where she started and what she became. From 3D design to the final item. Posted on 15 Nov
Moulding an oil drip tray with epoxy resin
Techniques used here are good practice for bigger projects The beauty of epoxy, says Jake Kavanagh, is that it makes a tough, non-shrinking connection between various angles of wood, ideal when you want to make a plug for a custom mould. Which is why he wrote this article on how to make a oil drip tray. Posted on 8 Nov
Flying High
J-TEC Composites interviewed about use of Wessex Resins and Adhesives James Newman, J-TEC Composites, says his favourite part of making products is the final outcome, when he sees the face of the customer realising the part 'does what they want it to do'. Posted on 31 Oct
Spirit of Sustainability
Spirit Yachts interviewed about use of Wessex Resins and Adhesives "We've used epoxy made by Wessex Resins since we started," says Nigel Stuart. "We've continued to use them ever since. We've looked at all the other resins and their backup but nothing compares. Wessex products do what it says on the tin. Posted on 22 Oct
Simon Maguire's insights into the Exocet Moth
David Johnson of Wessex Resins talks to the Maguire Boats owner at the Southampton Boat Show Simon Maguire, owner Maguire Boats, giving a unique insight into the design of the lightweight, multiple title winning, Exocet Moth as he talks with David Johnson at Southampton International Boat Show 2019. Posted on 30 Sep
Wessex Resins and Adhesives announces line-up
Guest speakers for Southampton International Boat Show Wessex Resins and Adhesives has announced the line-up of guest speakers for its 'in conversation with' day at Southampton International Boat Show 2019. Posted on 4 Sep
Building an 18th century Gajeta part 8
Finishing touches made to old design built with modern epoxy In our latest instalment of the building of a replica of an 18th century Croatian Gajeta, ‘Lipa Moja' becomes the sum of her parts. Many hours of craftsmanship have resulted in a beautiful vessel that is ready to race. Posted on 27 Aug
How to burst bubbles in epoxy
Simple tricks, and what to watch out for If you're finding that you've got bubbles when pouring clear casting epoxy here are some simple techniques to help resolve the problem. Posted on 21 Aug
Fire Retardant Additive for Epoxy Resin
Does what it says on the tin WEST SYSTEM 421 Fire Retardant Additive does what it says on the tin - it retards fire. It is a heavy, non-combustible powder that is added to a fresh mix of epoxy. Posted on 1 Aug
Building an 18th century Gajeta part 7
Modern epoxy techniques on a classic design After several months of intense boatbuilding, the craftsmen at the Betina Shipyard in Croatia are in the final stages of the completing their experimental 7-metre traditional sailing gajeta. Posted on 29 Jul
MBW newsletters (top)