Please select your home edition
Edition
Upffront 2020 Foredeck Club SW LEADERBOARD

Nick Black Discusses Internal Headsail Locks

by Andy Rice, SailJuice 12 Oct 2018 01:00 PDT
Internal halyard lock © upffront.com

In our last article on locks we talked about the pros and cons of External versus Internal lock systems. Here we'll look more closely at the internal systems available, which tend to be aimed at the performance-oriented programs that are prepared to pay more for superior aerodynamics.

There are two main types of internal locking system:

1. Internal bullet

2. Tripless

Broadly speaking, if I'm asked to do the specs for an all-out race boat, I would almost always advise on going for the internal bullet. On the other hand, I think for performance cruising boats that do a bit of racing, it's a lot easier to have the tripless lock system.

Internal Bullet

The bullet basically goes up through the sheave and then locks on to a flipper. The bullet pushes the flipper out of the way, and as it goes past, the flipper springs back into position and the bullet just butts up against that. To unlock, there is a separate tripline that opens the flipper and allows the bullet to release. It sounds simple enough although in the past there have been reliability issues with the flippers and the springs could malfunction slightly which could then lead to the bullet getting jammed in the mast. Sometimes the bullet could also get caught sideways in the sheave box.

However, there has been massive improvement in the bullet design over the last decade or so, which means these problems have almost entirely gone away. You do occasionally get problems if someone overwinds something by accident and breaks the halyard; in which case the sail is going to be stuck up there and someone will have to go aloft to get it down. That's why I still tend to recommend the internal bullet only for high-end projects with professional sailors involved.

Tripless

With tripless, you hoist the lock mechanism into the lock, you reach a mark on your halyard and it automatically locks into position. To release, you hoist the halyard a few centimetres past the locking position until the mechanism releases, at which point you can lower the sail.

Facnor and Karver both offer tripless internal locks, although they vary slightly in how they function. Facnor do a hoisting bullet although most of the body lives externally on the mast so you can see what's going on. The Karver system operates around an O-ring system and three little triggers that basically flip in and out of position.

When to use

A lot of the race boat programmes prefer the flipper and bullet scenario because it's very positive and for them it's a very quick solution, and success with locking is probably close to 100 percent. The bullet system allows you to launch into the hoist at full speed, using first gear from the winch straight onto the lock because you've got a mark and you don't need to worry about it.

With the tripless versions you need to be a little bit more accurate with what you're doing. You can't just do everything at full speed, you might have to swap into second or third gear and be a little bit more careful about not over-winding the halyard. However, for a performance cruising boat where time and speed are not vital, simplicity of the tripless version is recommended because it requires less operation by the crew.

What does it cost?

If you were looking to retrofit your 60 to 80 footer with an internal bullet system, you'd probably be looking at more than 5000 Euros just for the mechanisms, plus another 2000 Euros or so for the installation process. External is a lot cheaper, but if you want the aerodynamic and performance benefits, then internal is the way to go.

If you have any questions about lock systems, then please feel free to contact us at or complete the Halyard Locks enquiry form.

About the authors

Co-owner of independent rigging company, Rigging Projects, Nick Black is one of the most sought-after riggers in the business. One way or another Nick's work has made its way into most of the top tiers of the sport - the America's Cup, Volvo Ocean Race, Vendée Globe, the grand prix circuits like the TP52s, and in the superyacht scene.

Andy Rice is a UK-Based European and National Title holder for various types of Racing boats. He started his career in yachting journalism in 1992, writing for Seahorse Magazine. Rice now works as a journalist and copywriter for many different clients and magazines. In between his Sailing Intelligence commitments, he still manages to write regular columns for Seahorse, ShowBoats International, Yachts & Yachting and Boat International.

Related Articles

Morf Block merges into Morfrac Systems
Upffront.com speaks to the inventor, Nicolas Goldenberg At upffront.com we're big fans of the Morf Block. The lightweight, 3D-printed block started as a DIY kit and has expanded into two ranges: high performance and high load. Posted on 8 Jul
The Low-Down on High-Load Dinghy Blocks
Allen, Harken, Ronstan and Morf compared At upffront.com we love looking at the data and comparing products to gain insight. In this blog we look at the rapidly evolving world of high-load dinghy blocks and compare leading products on the market from Allen Brothers, Harken, Ronstan and Morf. Posted on 26 Jun
Spinlock's XTX available at upffront.com
The latest innovation in rope holding Widely known as experts in rope holding, Spinlock is the go-to solution for many sailors when it comes to clutches and jammers. We've been looking forward to the launch of their new product, the XTX Clutch, ever since we got our first look at METS 2019. Posted on 19 Jun
Ubi Maior X3M Flight Blocks
The compact high flyer reviewed by upffront.com Where does the Ubi Maior X3M Flight range sit relative to other blocks? Posted on 12 Jun
Allen Brothers overview from upffront.com
Dedicated to manufacturing excellence We are pleased to introduce the Allen Brothers 20mm and 30mm Dynamic Block ranges on the website and decided to take the opportunity to have an in-depth look at this fascinating UK manufacturer of performance dinghy hardware. Posted on 5 Jun
nke - Finding Their True Course
Upffront.com look at these high quality, precision navigation instruments nke is a specialist marine electronics manufacturer which has built a reputation, over 35 years, for high quality, precision navigation instruments for sailing yachts. Profiling companies like this is part of Upffront.com's raison d'être. Posted on 28 May
Ewincher - An alternative to electric winches?
A power-assisted winch handle requires no installation Electrification of winches can be a great benefit; reducing the strength and manpower needed on your boat and allowing many to sail short-handed or continue sailing longer in life. Is the Ewincher a viable, cost-effective alternative? Posted on 11 May
Extend your reach with Ronstan
The Battlestick is the self-professed 'next generation of sailing weaponry' Ronstan is an Australian born company who has developed hardware for both small and big boats since 1953. In this article we will look at their extensive range of tiller extensions which have become a brand in their own right: the Ronstan Battlestick. Posted on 30 Apr
Bamar's got your back... stay!
Looking to upgrade from a block and tackle system to a backstay tensioner? Looking to upgrade from a block and tackle system to a backstay tensioner? This blog will look at the Bamar BTV and BTM mechanical backstay tensioners and compare them with alternatives on the market. Posted on 23 Apr
PROtect Tapes SPK: Wooling spinnakers
An environmentally friendly and innovative system for solving an old problem PROtect Tapes provide solutions for the owners, boat captains and race teams who recognise that protecting the boat and reducing maintenance plays an important role in enhancing performance. Posted on 15 Apr
Upffront 2020 Foredeck Club SW FOOTER