Please select your home edition
Upffront 2020 Foredeck Club SW LEADERBOARD

The Difference Between Plain, Ball and Roller Bearings - from Upffront

by Diego Sosa, Upffront 23 Jul 2018 04:00 PDT
Karver KB blocks at mast base © Karver Systems

Deck blocks are evolving. Bearings are constantly improving, as manufacturers endeavour to minimize friction in different load cases.

Types of bearings

Apart from number of sheaves, blocks can also be categorised by their bearings.

  • Plain bearings: Although the name itself sounds quite vague, these are smooth, solid surfaces that move across each other. The sheave rotates across the central hub.

  • Ball bearings: Small spherical balls have little contact between surfaces, resulting in low friction. However, ball surfaces can be deformed under heavier loads, resulting in the jamming of the block,

  • Roller bearings: 'Rollers' are small tubes arranged around the centre of the bearing. Rollers are a 'compromise' between the plain and balls. Rollers wear faster than ball bearings but can carry higher loads as they have a higher contact area.

Different applications:

  • Plain Bearings

    The earliest (and original!) blocks used plain bearings, but they have slowly given way to higher-performing bearings. Plain bearings have the least number of moving parts. A long lifespan and low maintenance with heavy load applications are the main benefits of plain bearings.

    Metal or plastic sheaves roll directly on metal pins or bushings. Plain bearings are often comprised of a plastic surface and a metal shell. Another common kind of plain bearing will use a soft bronze bushing and a polished steel shaft. Their static and high-load capability make plain bearings suitable for vangs, backstay, runner and halyard turning blocks. However, full contact between two surfaces results in more friction, reducing their potential running speed.

  • Ball Bearings

    Ball bearings were the response to reduce this friction and they do this job extremely well. However, the small contact surface of the balls, which reduces the friction so much, is also their biggest weakness i.e. the point loading of the balls can lead to compression, at high loads and the block jamming. Ball bearings are high performance blocks suited to running at high speeds, but their size and weight increase significantly as loads rise. So, the R+D for block bearings wasn't finished at this stage.

  • Roller Bearings

    Roller bearings were the compromise between plain and ball bearings. Rollers facilitate low friction at high working loads. Heavily-loaded lines run faster, smoother and are more easily adjusted compared to a plain bearing block. They can also be smaller and lighter than a ball bearing block, for the same working load, due to the increased contact between the rollers and the hub.

    Found on sailing boats of 35'+, these blocks are optimal for mainsheets, guy leads, backstays, after guys and tack lines.

For larger boats, blocks use a blend of ball and roller bearings. Roller bearings take the main line loads, leaving the ball bearings mounted around either edge to keep the sheave running smoothly, even with off-axis loads. This can be seen in the '2-Stage bearing system' of the Ronstan Core Blocks.

What are bearings made from?

Ball and roller bearings are commonly manufactured with the following materials:

  • Delrin - Commonly found in deck blocks and known as 'acetal'. This is a thermoplastic specially designed for high compression, but low tension, thus suitable for low loads.

  • Torlon - Is the commercial name given to the high-performance thermoplastic composite material and offer a performance upgrade to Delrin balls.

  • Ceramic - Ceramic ball bearings are incredibly strong and can be polished to incredibly smooth surfaces. This enables them to handle extraordinary heavy loads with very low friction but their cost generally limits them to Grand Prix level blocks.

For many years, the backbone of most block ranges were heavy plastics with aluminium or stainless steel structural side plates, which were used to transfer loads. As computing power advanced, designers modelled crucial load paths accurately to ensure sufficient strength from modern, lightweight composite materials. Today, blocks are lighter and smaller than those used a decade ago, making them perfect for the thinner hi-tech lines / ropes.

Perhaps another step of this evolution is the current shift towards rope blocks and lash thimbles on Dyneema® loops.

This is merely a modern evolution of the plain bearing block, but it has sparked furious debate: is it a real block or just a friction sheave?


Our focus is on sailing systems and our aim is to improve knowledge and accessibility to the latest developments in lightweight, composite rigging and promote lighter, faster, safer sailing for boats of all shapes and sizes from dinghies to superyachts.

Improve knowledge and accessibility

Related Articles

Morf Block merges into Morfrac Systems speaks to the inventor, Nicolas Goldenberg At we're big fans of the Morf Block. The lightweight, 3D-printed block started as a DIY kit and has expanded into two ranges: high performance and high load. Posted on 8 Jul
The Low-Down on High-Load Dinghy Blocks
Allen, Harken, Ronstan and Morf compared At we love looking at the data and comparing products to gain insight. In this blog we look at the rapidly evolving world of high-load dinghy blocks and compare leading products on the market from Allen Brothers, Harken, Ronstan and Morf. Posted on 26 Jun
Spinlock's XTX available at
The latest innovation in rope holding Widely known as experts in rope holding, Spinlock is the go-to solution for many sailors when it comes to clutches and jammers. We've been looking forward to the launch of their new product, the XTX Clutch, ever since we got our first look at METS 2019. Posted on 19 Jun
Ubi Maior X3M Flight Blocks
The compact high flyer reviewed by Where does the Ubi Maior X3M Flight range sit relative to other blocks? Posted on 12 Jun
Allen Brothers overview from
Dedicated to manufacturing excellence We are pleased to introduce the Allen Brothers 20mm and 30mm Dynamic Block ranges on the website and decided to take the opportunity to have an in-depth look at this fascinating UK manufacturer of performance dinghy hardware. Posted on 5 Jun
nke - Finding Their True Course look at these high quality, precision navigation instruments nke is a specialist marine electronics manufacturer which has built a reputation, over 35 years, for high quality, precision navigation instruments for sailing yachts. Profiling companies like this is part of's raison d'être. Posted on 28 May
Ewincher - An alternative to electric winches?
A power-assisted winch handle requires no installation Electrification of winches can be a great benefit; reducing the strength and manpower needed on your boat and allowing many to sail short-handed or continue sailing longer in life. Is the Ewincher a viable, cost-effective alternative? Posted on 11 May
Extend your reach with Ronstan
The Battlestick is the self-professed 'next generation of sailing weaponry' Ronstan is an Australian born company who has developed hardware for both small and big boats since 1953. In this article we will look at their extensive range of tiller extensions which have become a brand in their own right: the Ronstan Battlestick. Posted on 30 Apr
Bamar's got your back... stay!
Looking to upgrade from a block and tackle system to a backstay tensioner? Looking to upgrade from a block and tackle system to a backstay tensioner? This blog will look at the Bamar BTV and BTM mechanical backstay tensioners and compare them with alternatives on the market. Posted on 23 Apr
PROtect Tapes SPK: Wooling spinnakers
An environmentally friendly and innovative system for solving an old problem PROtect Tapes provide solutions for the owners, boat captains and race teams who recognise that protecting the boat and reducing maintenance plays an important role in enhancing performance. Posted on 15 Apr
Upffront 2020 Foredeck Club SW FOOTER