Please select your home edition
Edition
Allen Brothers

Dremel: The Moth sailor's best friend

by Mark Jardine 12 Jul 2018 04:28 PDT 11-14 July 2018
The Dremel © Mark Jardine / IMCA UK

One of the familiar sounds in the dinghy park at any International Moth event is the whirr of the battery-powered Dremel and then the grind of carbon.

Modifications and upgrades take place constantly and it's during events that sailors spot changes on other boats and then implement it on their boat before the day's racing.

I spoke to Tom Offer about the Moth sailor's friend...

"The Dremel is multi-purpose; you've got a cutting tool, a drilling piece and you can use it in a variety of different ways - grinding and cutting bits of carbon – it works for everything really."

The Moth class is the ultimate tinkerer's boat and many of the Moth suppliers turn up to events with a batch of new parts: "You're always trying new bits of equipment and when you put something new on there's always going to be a bit of fettling to do, making sure that a new bit of carbon fits flush with the area you're marrying it up to – there's always a bit of trimming involved."

As with any power tool, and some of the tight, enclosed spaces that the work needs to be done on, accidents can happen - as Tom knows from personal experience:

"With my new Rocket SSD I had to put Exocet foils on it, and fitting the foils is quite a precise bit of work getting the foils pinned at just the right angle of attack. I had the boat upside-down on trestles with the main foil in place and I had to oversize the holes on the centreboard case so that I could then glue some bushes in to hold everything in the right place.

"Underneath the fairing is quite difficult to get to and so the Dremel had to be underneath the fairing, so I could get a nice angle onto the centreboard case to make the hole that I wanted to make. I was using a tile cutting piece so the Dremel spins at quite a high rate and was holding it by my finger tips as the rest of the Dremel was underneath the fairing, tapping the centreboard case with the cutter, and unfortunately my fingers touched the spinning area of the tool and I had to let it go, meaning it slid inside the fairing and lodged itself there, still spinning.

"Luckily the bit was spinning in air, but I knew I couldn't shake or move the boat as I'm sure it would have done some damage, so I just had to wait for the battery to run out three hours later!"

Tom's sure the Moth class would be lost without the Dremel:

"While there are other tools out there, the battery-powered Dremel is pretty unique in the way you can apply it to the bits you need to do on the boat."

As the Moth class continues to evolve I'm sure the sound of Dremels in the dinghy park will continue well into the future.

Related Articles

Conner Blouin on the 2021 Waszp North Americans
An interview with Conner Blouin on the 2021 Waszp North American Championship Regatta I checked in with Conner Blouin, regatta chair of the 2021 Waszp North American Championship, via email, to learn more about this exciting foiling affair. Posted on 3 Dec
David Graham on the future Paralympic sailing
David Schmidt checks in with the CEO of World Sailing I checked in with David Graham, CEO of World Sailing, via email, about the organization's “Back the Bid” campaign to reinstate sailing at the 2028 Paralympic Games. Posted on 1 Dec
Making the world smaller
They used to say any publicity is good publicity They used to say any publicity is good publicity, but that has been severely tested in recent times by celebrities and sportspeople who wish they were anywhere but the limelight when things go pear shaped. Posted on 30 Nov
70 years of going Dutch
The UK's part in the history of the Flying Dutchman Since the early 1950s the Flying Dutchman has been one of the pinnacles of performance sailing. What though is the secret behind this amazing and often ground-breaking boat? Posted on 26 Nov
And thank you very much…
It all started with an announcement that there would be no less than eight model launches... Been a big year for Maritimo. It started with an announcement that there would be no less than eight model launches or announcements during the course of 2021 Posted on 26 Nov
AC37 Protocol published, TJV, Skiff/Nacra Worlds
David Schmidt's newsletter with the latest from the sailing world Given the “time soup” that the world seems to have collectively entered since the start of the pandemic, you're forgiven if the 36th America's Cup (March, 2021) seems like ages ago. That said, the wheels of motion never cease in the AC world. Posted on 23 Nov
Interview with PowerUP Energy Technologies CEO
We speak to Dr. Ivar Kruusenberg at METSTRADE 2021 Mark Jardine, Managing Editor of Sail-World.com, talks to Dr. Ivar Kruusenberg, CEO and founder of PowerUP Energy Technologies, at METSTRADE 2021 to find out more about their fuel cell generators which use pure hydrogen gas as fuel. Posted on 22 Nov
Iron Topsail
Often it's simply just, The Smelly. Yes. The humble auxiliary... Often it's simply just, The Smelly. Yes. The humble auxiliary... Without it we'd be lost, and yet it can be treated with such disdain. One question could well be, for how much longer? Posted on 21 Nov
METSTRADE 2021: SHOCK-WBV and Omega
We speak to Daniel Henderson and see a slow-motion demonstration of Omega in action! Mark Jardine chats to Sea Sure's Daniel Henderson about the SHOCK-WBV and Omega shock mitigation units, with a slow-motion demonstration of Omega. Posted on 18 Nov
New at METSTRADE 2021 - Barton Marine's SkyDock
Looking to safely store a dinghy or other items high in your garage loft? Looking to safely store a dinghy or other items high in your garage loft? Barton Marine may have the answer with SkyDock! Mark Jardine speaks to Christian Brewer to find out more... Posted on 17 Nov
MBW newsletters (top)