Please select your home edition
Edition
Upffront 2020 Foredeck Club SW LEADERBOARD

What's the difference between top-down and bottom-up furling?

by Diego Sosa, Upffront 9 Jul 2018 00:00 PDT
Bottom-up - Tack of sail is lashed to bottom thimble of torsional cable © Facnor Furling Systems

"Top-down" and "bottom-up" furling are expressions used primarily for continuous line furling systems using a torsional cable/rope, around which the sail furls.

As opposed to a traditional foil furling system, used on cruising boats, where the jib/genoa is hoisted in a luff groove in the aluminium foil and the sail furls around the full length of the foil.

Bottom-up Furling

Continuous line furlers have evolved in line with the popular growth in the use of Code Zero sails. The Code Zero is a relatively deep, lightweight, reaching sail. It is referred to as a "straight luff" sail where reasonable luff tension is required to enable pointing. The torsional cable is enclosed in a pocket which runs up the luff of the sail.

The sail is lashed to the thimbles of the cable at both the tack and head. The cable sits with the sail in the sail bag, already tightly furled. When it comes time to deploy the sail, the cable thimbles are attached to the furling drum at the tack and a swivel at the head, hoisted as a long sausage and tightened. To unfurl, the continuous line drum is allowed to spin freely until the sail is fully deployed. When it comes time to furl away the Code 0, as the furling drum starts to turn, it starts to wrap the bottom of the sail around the cable first and the furl gradually works its way up the luff of the sail - hence the expression "Bottom-up".

Top-down furling

The emergence of top-down furling is a much more recent phenomena. As Code 0's became more popular, so too did asymmetric gennakers, particularly in racing circles where they were looking to optimise their downwind sailing angles. Asymmetric gennakers are really an extension of the code zero, they just get deeper and lighter as the desired sailing angle becomes lower. However, there is one fundamental difference between a gennaker and a code 0: as you sail deeper you want the whole sail to be able to rotate around the forestay plus you achieve greater sail area with more positive luff curve compared to a tighter reaching sail which requires a straight luff. Therefore, gennakers require a free flying luff which is independent from the furling cable.

The traditional method for dousing a spinnaker was a snuffer but with the increasing use of bottom-up furling for code zero's, and their similarities to asymmetric gennakers, people started to experiment with continuous line furlers. Initial attempts at standard bottom-up furling proved disastrous. Due to the depth of the centre of the sail, compared to the corners, the furl would start at the bottom, but before the centre of the sail was furled away, it would also start furling from the top-down, leaving a large pocket of air trapped in the middle of the furled sail.

There is plenty of debate about who actually started the top-down furling craze but the solution to effectively furling away these deep downwind sails was to allow the furl to start at the head and leave the tack of the sail to rotate freely at the bottom, unconnected to either the cable or the furling drum. The result: the furl is transmitted from the drum, along the full length of the furling cable and starts at the head of the sail and all the air is squeezed out of the sail as the furl travels down the cable to the tack.

Summary

  • Bottom-up furling
    • Straight luff code zeros and staysails - reaching sails
    • Torsional cable contained within a luff pocket in the sail
    • Sail attached to both top and bottom of the cable
    • Furl starts at the bottom and works its way up the luff of the sail
  • Top-down furling
    • Loose luffed asymmetric gennakers - running sails
    • Sail is attached to the cable at the top but allowed to rotate free from the cable or drum at the tack
    • The furl starts at the head of the sail and works its way down the cable
To get a complete guide to specifying and purchasing continuous line furling systems please download our "Furling System - Overview" document.

Related Articles

Alphalock Halyard Locks
Simply the best? A close look from upffront.com The Alphalock brand is a relative newcomer on the sailing hardware scene but its CEO, Eric Hall - founder of Hall Spars and inventor of their renowned Hall Autolocks - is anything but "the new kid on the block"! Posted on 17 Sep
Sailboat Hardware Soft Attachments
Fad or paradigm shift? There is an increasing trend towards soft attachment of sailing hardware and rigging i.e. using a lashing or soft loop, however they are not a catch-all solution. Posted on 10 Sep
Live Rig Load Data at Your Fingertips
Cyclops Marine Smartlink reviewed by upffront.com In a previous article we looked at the benefits of having live forestay load data using the Cyclops Marine Smarttune load sensor. Now we take a closer look at the sister product, often used in combination with the Smarttune, called the Smartlink. Posted on 3 Sep
An Innovative Twist to the Stick-on Padeye
LOOP Products available at upffront.com Padeyes are a multi-purpose attachment point, traditionally made of steel and bolted directly on to the deck. With a significant shift to soft connections over the last 5-10 years, the humble padeye has been through its own transformation. Posted on 28 Aug
Nine uses for Millionaire's tape
Excellent value for money, despite the name PROtect Mask, commonly known as 'Millionaire's tape' in many sailing circles, has been an essential part of riggers toolkits for years. Posted on 21 Aug
Evolution in the DNA
upffront.com look at the Morf Block options now available Morf Block - the brainchild of Morfrac Systems - is constantly evolving. Once a DIY block, where the user was free to use the lash thimble of their choice, Morf Block is now available ready-to-run, optimised for either high performance or high load. Posted on 17 Aug
Sailboat Load Data
Optimising hardware and rigging design Find out just how far we still have to go in terms of understanding yacht mast and rigging loads, and why they are so important to the specification of sailing hardware and rigging systems. Posted on 30 Jul
Replacing Karver's Furler Quick Release Spring Kit
Captive pins are almost universal on furling drums and swivels The quick release mechanisms rely on small springs which can get damaged and require replacement. This article will outline the evolution of the Karver captive pin systems and help you identify the correct replacement spring kit for your Karver furler. Posted on 25 Jul
Morf Block merges into Morfrac Systems
Upffront.com speaks to the inventor, Nicolas Goldenberg At upffront.com we're big fans of the Morf Block. The lightweight, 3D-printed block started as a DIY kit and has expanded into two ranges: high performance and high load. Posted on 8 Jul
The Low-Down on High-Load Dinghy Blocks
Allen, Harken, Ronstan and Morf compared At upffront.com we love looking at the data and comparing products to gain insight. In this blog we look at the rapidly evolving world of high-load dinghy blocks and compare leading products on the market from Allen Brothers, Harken, Ronstan and Morf. Posted on 26 Jun
Upffront 2020 Foredeck Club SW FOOTER