Please select your home edition
Edition
upffront 2018 Millionaires Tape 728x90

What's the difference between top-down and bottom-up furling?

by Diego Sosa, Upffront 9 Jul 2018 00:00 PDT
Bottom-up - Tack of sail is lashed to bottom thimble of torsional cable © Facnor Furling Systems

"Top-down" and "bottom-up" furling are expressions used primarily for continuous line furling systems using a torsional cable/rope, around which the sail furls.

As opposed to a traditional foil furling system, used on cruising boats, where the jib/genoa is hoisted in a luff groove in the aluminium foil and the sail furls around the full length of the foil.

Bottom-up Furling

Continuous line furlers have evolved in line with the popular growth in the use of Code Zero sails. The Code Zero is a relatively deep, lightweight, reaching sail. It is referred to as a "straight luff" sail where reasonable luff tension is required to enable pointing. The torsional cable is enclosed in a pocket which runs up the luff of the sail.

The sail is lashed to the thimbles of the cable at both the tack and head. The cable sits with the sail in the sail bag, already tightly furled. When it comes time to deploy the sail, the cable thimbles are attached to the furling drum at the tack and a swivel at the head, hoisted as a long sausage and tightened. To unfurl, the continuous line drum is allowed to spin freely until the sail is fully deployed. When it comes time to furl away the Code 0, as the furling drum starts to turn, it starts to wrap the bottom of the sail around the cable first and the furl gradually works its way up the luff of the sail - hence the expression "Bottom-up".

Top-down furling

The emergence of top-down furling is a much more recent phenomena. As Code 0's became more popular, so too did asymmetric gennakers, particularly in racing circles where they were looking to optimise their downwind sailing angles. Asymmetric gennakers are really an extension of the code zero, they just get deeper and lighter as the desired sailing angle becomes lower. However, there is one fundamental difference between a gennaker and a code 0: as you sail deeper you want the whole sail to be able to rotate around the forestay plus you achieve greater sail area with more positive luff curve compared to a tighter reaching sail which requires a straight luff. Therefore, gennakers require a free flying luff which is independent from the furling cable.

The traditional method for dousing a spinnaker was a snuffer but with the increasing use of bottom-up furling for code zero's, and their similarities to asymmetric gennakers, people started to experiment with continuous line furlers. Initial attempts at standard bottom-up furling proved disastrous. Due to the depth of the centre of the sail, compared to the corners, the furl would start at the bottom, but before the centre of the sail was furled away, it would also start furling from the top-down, leaving a large pocket of air trapped in the middle of the furled sail.

There is plenty of debate about who actually started the top-down furling craze but the solution to effectively furling away these deep downwind sails was to allow the furl to start at the head and leave the tack of the sail to rotate freely at the bottom, unconnected to either the cable or the furling drum. The result: the furl is transmitted from the drum, along the full length of the furling cable and starts at the head of the sail and all the air is squeezed out of the sail as the furl travels down the cable to the tack.

Summary

  • Bottom-up furling
    • Straight luff code zeros and staysails - reaching sails
    • Torsional cable contained within a luff pocket in the sail
    • Sail attached to both top and bottom of the cable
    • Furl starts at the bottom and works its way up the luff of the sail
  • Top-down furling
    • Loose luffed asymmetric gennakers - running sails
    • Sail is attached to the cable at the top but allowed to rotate free from the cable or drum at the tack
    • The furl starts at the head of the sail and works its way down the cable
To get a complete guide to specifying and purchasing continuous line furling systems please download our "Furling System - Overview" document.

Related Articles

Nick Black Talks Main Halyard Locks
Final discussion in the series on lock systems for yachts The final in our series on lock systems for sailing yachts, Andy Rice talks to Nick Black of Rigging Projects about mainsail locks. Reef locks have taken off in a big way in recent years, mostly because clew loads have become higher and higher, Posted on 14 Jan
Introduction to Winches
With recent innovative features and performance improvements Although the fundamental mechanics of winches have not really changed over the years, there are some innovative features and performance improvements which have appeared in the industry in more recent years. Posted on 11 Jan
Top-down and Bottom-up Furling Units
Differences and options broken down by upffront.com What are the key differences between bottom-up and top-down furling units and do I need a dedicated unit for each type of furling? The primary difference is that a top-down drum has the addition of a free floating tack swivel mounted on the furling drum. Posted on 28 Dec 2018
Nick Black and Andy Rice on Furling Halyard Locks
Bringing costs down to a more reasonable level The new generation of swivelling locks combine a tripless locking system with a high-performance bearing system. An enormous amount of R&D has gone into the development of these fittings, which is why for many people they are also too expensive. Posted on 21 Dec 2018
Structural Furling Forestays
An increasingly popular, lightweight alternative Continuous line furlers, together with a torsional cable, is an alternative furling system for the main structural forestay. This is an increasingly popular, lightweight choice for both racing and cruising sailors. Posted on 17 Dec 2018
Furling Systems: Options and Accessories
Several other furling considerations need to be taken into account When purchasing a furling system, there are several other considerations that need to be taken into account to ensure you have a fully operational furling system. Some are basic/essentials and others are optional extras. Posted on 12 Dec 2018
Is it worth paying for better running rigging?
The cost versus benefit trade-off for a 25ft boat What is the cost versus benefit trade-off for running rigging options on a 25 ft sailing boat? We take a look at three running rigging specs and investigate whether the increase in cost is justified by the performance benefits. Posted on 7 Dec 2018
Top-down versus Bottom-up Furling Cable Specs
What to look out for Have you got any idea what's the difference in design between a top-down or bottom-up torsional cable? Find out what makes a good torsional cable and the important differences between the two applications. Posted on 3 Dec 2018
Brand New Bamar Furling
Two well-engineered product ranges available now If you're a regular visitor to Upffront.com, you will have noticed two new impressive additions to our website: the Bamar RLG EVO Gennaker Furling and the Bamar GFM Manual Foresail Furling systems. Posted on 28 Nov 2018
Make Waves with nke Marine Electronics
Innovative systems for racing or cruising It's the age of information, and global technological advancements have revolutionised our lives and industries alike. As with many others, the sailing industry has benefitted from the introduction of marine electronics that make it easier. Posted on 23 Nov 2018
YY.com app (top)