Please select your home edition
Edition
RS Sailing 2021 - LEADERBOARD

What direction for the Kirby Torch?

by Mark Jardine 25 Apr 2013 09:16 PDT 25 April 2013

However you look at it, the current situation with the Laser class is a quagmire. It's not good for the class, it's not good for sailing, and right now it's hard to see a solution when the parties seemingly won't even speak to each other, let alone negotiate a solution.

Over a 40 year history, over 200,000 Lasers have been produced and it is the current Olympic singlehanded class for both Men and Women (Radial Rig).

The roots of the class lay in a telephone conversation between Bruce Kirby and Ian Bruce in 1970 where they discussed the possibility of an affordable, car-toppable dinghy and Bruce Kirby went on to sketch what would be known as 'the million dollar doodle'.

The legal situation looks complex and is definitely something I don't understand. I do know that Bruce Kirby designed the 'Kirby Sailboat' and that the Laser trademark is held by another company. This is something for lawyers to sort out if the involved parties so wish. The current situation is that Bruce Kirby has started a new class called the 'Kirby Torch' which is his original 'Kirby Sailboat' design of dinghy under a new name and logo.

As a sailor, my thoughts are that the Kirby Sailboat has moved a long way from its roots. A mainsail now costs £395 (or £450 rolled) whereas replica mainsails are available for £140. When racing at the top level sails last a week and top sections can last anywhere between 2 weeks and 12 months.

So, how about if the Kirby Torch became the affordable, car-toppable boat again? A new Class Association which embraced the replica market. Yes, replica parts would have to be brought into line so that they were ensured to be one-design, but this can't be too hard as many of them are currently designed to comply with Bruce Kirby's original build specifications.

There are loads of hulls in various states of repair around the world that could be revived and back out on the water for minimal outlay. This could get more people back out on the water and would be great for the marine industry as a whole – as we all know when you get hooked into sailing, whatever the class of boat you sail, you inevitably ending up wanting more. This could be a whole new route to get people into the sport that we love.

A couple of changes could be made from the outset to the new class; a mainsail design that lasts longer and a top-section that holds its shape seem the most obvious.

Would Bruce Kirby go for this? I don't know, but it would certainly secure his legacy. His name would finally become a part of 'his baby'. Maybe a royalty could and should be paid to Bruce for the parts that make up the Torch? It's just a thought... but personally I think it would be as good a solution as any.

Related Articles

Banger Racing, Back Racing and No Racing
Racing on the cheap, a return to racing for young Aussies, and ILCA struggles We start with racing on the cheap at the Colander Cup, then focus on a return to racing for the Aussies at the Youth Worlds, moving on to a complete lack of racing at the ILCA Worlds, and then looking at how SailGP should be back out on the water. Posted on 14 May
Exposure Marine Fastnet Race Kit Video Review
A set of 3 torches specifically designed for offshore racing crews It's a huge year for offshore sailing, and arguably the biggest event of the summer is the Rolex Fastnet Race. Within an hour of entries opening the Royal Ocean Racing Club had received a record 435 yacht registrations. Posted on 14 May
Touching base with Francesca Clapcich
Francesca Clapcich on her 2028-2029 Vendee Globe campaign In late March, Italian-American sailor Francesca “Frankie” Clapcich announced that her Team Francesca Clapcich Powered by 11th Hour Racing will campaign for the 2028-2029 edition of the Vendee Globe race. Posted on 13 May
How Seldén Carbon Masts are made
I took a look around the Seldén Mast factory with Richard Thoroughgood to find out more I took a look around the Seldén Mast factory with Richard Thoroughgood from Seldén to find out a bit more about how the carbon tow reels become the masts that we use when out sailing. Posted on 12 May
SAY it with intent! SAY it in carbon…
You know, you might also have to SAY it in epoxy. You know, you might also have to SAY it in epoxy. Get all that, and you are certainly someone who needs to know about SAY Carbon Yachts. It's all about efficiency, acceleration, pace, and the amount of horsepower required to get there. Posted on 8 May
Night sailing, Transat Paprec, Congressional Cup
Night sailing, encountering light airs in the Transat Paprec, Congressional Cup We bundled up as the last of the rays sunlight dipped below the Olympic Mountains and night quietly fell on Puget Sound. We'd been racing for about twelve hours in the Seattle Yacht Club's Protection Island Race (April 26), and we were getting tired. Posted on 6 May
For the love of slightly larger, even faster boats
Bring it on. No chicken chutes allowed. Celestial, the newest Cape 31 in Oz is up and racing Thank you. You have let For the love of small, fast boats run before the breeze like a superlight planning hull under way too big a kite, with immense sheep in the paddock, and the Sailing Master grasping the flare gun in his pocket... No chicken chutes. Posted on 4 May
Touching base with Erden Eruç
Erden Eruç on his 2026 Golden Globe Race campaign Adventures come in all sizes, scales, speeds, and price tags. My longtime friend and sometimes shipmate Erden Eruç was the first person to complete a human-powered solo circumnavigation. He's now turning his attention to the 2026 Golden Globe Race. Posted on 1 May
The Allure of Timber
The longevity, and sheer beauty, of boats made of wood In these days of exotic materials, high modulus carbon and ultra lightweight construction, it's possible to overlook the longevity, and sheer beauty, of boats made of wood. Posted on 29 Apr
A look inside the Spirit Yachts yard
A close look at what makes their yachts unique Traditional skills in boatbuilding could be regarded as a lost art from a bygone era. In the world of fibreglass and carbon, the joinery and laminating techniques of wood ribs and cedar strips are a thing of the past. Posted on 28 Apr
Selden 2020 - FOOTERRS Sailing 2021 - FOOTERAllen Dynamic 40 Footer