BLA releases a range of Boat Biminis, Rocket Launchers and Boat Covers
by BLA on 29 Sep 2016
BLA releases a range of Boat Biminis, Rocket Launchers and Boat Covers BLA
BLA has released a range of high quality and heavy duty Boat Biminis, Rocket Launchers and Boat Covers in a variety of sizes.
Premium quality Marine Biminis
Rated to 40 knots when fully open
100% polyester top
Bimini sock and rear support arms are included
How to measure for a Bimini Top
All that is necessary to determine which size top to order is choosing the length, height and width that best accommodates your boat and your requirements. Using a tape measure, decide which length top covers the portion of the boat you want covered, i.e. 1650mm or 2400mm.
The pivotal mounting point will be approximately at the centre point of the top of each side of the boat. The deck mounts included with the top are designed to mount on a relatively flat horizontal surface. Side mounts are supplied with this product.
After determining where the pivotal mount location will be on each side of the boat, measure the distance between these mounting points to determine the width of top you need.
While standing inside the boat, measure from the pivotal mounting point straight up to determine desired height. Once you have all the measurements, simply go to the sizing chart on this box and select the one you need. All of the instructions are supplied in the box.
Premium quality Rocket Launchers
Rated to 40 knots
Quality sturdy frame
Two different widths
Easy to fit
Australian owned and designed
How to measure for a Rocket Launcher
In order for a BLA Rocket Launcher to fit your bimini you will need to do the following:
• Ensure your bimini has rear support arms
• You will need to measure the width of your bimini
• As BLA Rocket Launchers come in two different widths, there will be one that suits your needs
• Once you know the width of your bimini, refer to the list below for the one that best
suits your needs
All you need to put the Rocket Launcher on your
bimini is a Phillips head screwdriver. All BLA
Rocket Launchers will fit all BLA Biminis.
Heavy duty Towable Boat Cover
New ripstop waterproof fabric
U.V. and mildew resistant
Wear patches sewn into nose and stern corners to reduce wear
Support pole stud sewn into cover
Ratchet for superior tightening
Cover designed for towing (includes buckles and straps)
Storage bag included
Air vent
Australian owned and designed
If you want to link to this article then please use this URL: www.sail-world.com/148605