Please select your home edition
Edition
Wetsuit Outlet 2019 - 728x90

Urgent safety advisory issued after fatal tether failure in race

by Sail-World NZ and RYA/MAIB (UK) 9 Jan 2018 15:59 PST 10 January 2018
A competitor in the Clipper Round the World Yacht Race sailing in the Southern Ocean with the crew all tethered to the jackline. © Clipper Race

The British Marine Accident Investigation Branch has released an urgent safety advisory bulletin following the fatal man overboard incident during the current Clipper Round the World Yacht Race.

The incident took place in the Indian Ocean on November 18, when British solicitor Simon Speirs (60) went overboard from the yacht CV30 after being swept off the bow by a wave. Wind conditions at the time were 20kts gusting 40kts.

He was wearing the correct safety equipment at the time including a safety harness and tether which was attached to the boat.

The tether failed under load and broke. While Simon Speirs was recovered 36 minutes later, he was unable to be revived and was buried at sea some 1500nm from Fremantle.

The preliminary investigation has revealed that the snap clip used to attach Simon Speirs to the yachts jackline had caught under a cleat or similar fitting on the yacht and had become unable to be properly aligned when the man overboard load was applied.

As a result, it appears that the tether hook distorted because of the load angle and released.

The summary of the advisory reads: "To prevent the strength of a safety harness tether becoming compromised in-service due to lateral loading on the tether hook, the method used to anchor the end of the tether to the vessel should be arranged to ensure that the tether hook cannot become entangled with deck fittings or other equipment."

In other words, the tether hook must be free to slide on the jackline or other secure point. The tether hook is designed to be aligned with the angle of the load.

If the tether hook is not aligned to the tether load and has a lateral load applied it may bend/distort and fail to secure the sailor to the boat.

The tether and hook are supplied with one leading brand of safety equipment and similar styles are used by others. It is not known if the reason for the tether hook failure in Simon Spiers' instance has also been a factor in other incidents involving tether failure. According to the video below a tether with load in the designed direction will fail at 2000kgs. With the load carried at an angle the tether hook fails at just 200kgs.

Below Nic Douglass talks with Sir Robin Knox-Johnson and Matt Allen about the tether hook issue and what can be done short and long term about the situation, which is now known.

A safety message this Christmas...

I took the opportunity today to catch up with Sir Robin-Knox Johnston, the CEO and founder of the Clipper Round the World Yacht Race and Matt Allen, the Vice-Chair of World Sailing’s Oceanic & Offshore Committee about the unfortunate failure of a tether clip which led to a casualty on the third leg of the race. Sailing is a safe sport, but education and awareness is important to make sure that we can save lives, and see everyone stay safe over Christmas, a busy time for sailing in this part of the world! Thanks to Matt and Robin for talking with me today in the Rolex Sydney Hobart village at the Cruising Yacht Club Of Australia to make this issue clear to everyone. Stay safe over Christmas, Nic xx

Posted by Adventures of a Sailor Girl on Saturday, December 23, 2017

The full advisory bulletin reads:

Background The sailing yacht CV30 was taking part in the third leg of the Clipper Round the World Yacht Race having left Cape Town on 31 October 2017 bound for Fremantle, Western Australia. At about 1414 local time on 18 November 2017, the yacht was in position 42°30.3’S, 087°36.3’E, approximately 1500nm from Fremantle, when a crew member, Simon Speirs, fell overboard. He was attached to the yacht by his safety harness tether. The hook at the end of the tether that was clipped to a jack-line, deformed and released resulting in him becoming separated from the yacht. Simon Speirs was recovered unconscious onto the yacht but sadly could not be resuscitated.

For the Marine Accident Advisory Board website item click here

Initial Findings Simon Speirs was using a three-point webbing tether attached to the integral harness of his lifejacket that allowed him to clip on to the yacht with a short or long tether.

A safety issue identified during the investigation was that the hook on the end of Mr Speirs’ tether had become caught under a deck cleat (see Figure 1), resulting in a lateral loading that was sufficient to cause the hook to distort (see Figure 2) and eventually release.

The harness tether was certified under ISO12401 (Small craft – Deck safety harness and safety line – Safety requirements and test methods), which is the international standard applicable to this equipment. The standard contains detailed testing requirements that assume the tether and its hooks will be loaded longitudinally rather than laterally.

The tether hook was of a conventional design and quality of build and was commonly used by manufacturers of safety harnesses and tethers that were certified under ISO12401.

When loaded longitudinally, the tether can withstand a load of over 1 tonne. However, when loaded laterally a tether hook will deform at much less load. It is important that tether hooks remain clear of obstructions and are free to rotate to align the load longitudinally.

Safety Lesson To prevent the strength of a safety harness tether becoming compromised in-service due to lateral loading on the tether hook, the method used to anchor the end of the tether to the vessel should be arranged to ensure that the tether hook cannot become entangled with deck fittings or other equipment.

Related Articles

Gladwell's Line: Dinghy trials...Am Cup..18fters
A scan of the Sailing scene from the past week or so - America's Cup, 18fters and Singlehanders A look at the Evaluation Trials for the Single Handed Mens and Womens Single Handed Dinghy to be used at the 2024 Olympics. What was really behind the Applications to the America's Cup Arb Panel? And a look at the Kiwi win in the JJ's in Sydney Posted today at 2:06 am
Olympics 2024: Singlehander Trials conclude
Kontides wins 2024 Olympic single-hander equipment trials in Valencia Grand finale for the Olympic Trials in Valencia. The fourth and final day of testing at sea has reserved Posted on 20 Mar
Left Languishing
Trophies, are somewhat different from boats. They don't tend to deteriorate quite so badly Trophies are somewhat different from boats. They don't tend to deteriorate quite so badly when they get left alone for ages. Case in point, the Sayonara Cup. It has had several periods in its life when it has been left to its own devices. Posted on 17 Mar
Lion New Zealand returns after $1million refit
Lion New Zealand is safely back in the water after completing a major million-dollar refit Nearly two years after her arrival at Yachting Developments in May 2017, Lion New Zealand is safely back in the water after completing a major million-dollar refit at the yard. You or your club/organisation can help to defray the outstanding refit cost. Posted on 13 Mar
Nothing wrong with your eyesight
Look closely, and you'll notice it is two Black Jacks, not one superimposed over the other. Look closely, and you'll notice it is two Black Jacks, not one superimposed over the other. The upper one with the rig still in is the world famous, and ever-conquering Reichel/Pugh 100 supermaxi with the heavy bulb, and the other is the modified VO70. Posted on 10 Mar
JJ Giltinan proving to be a regatta for the ages
In Sydney, New Zealand's defence of the JJ Giltinan Championship is progressing well In Sydney, New Zealand's defence of the JJ Giltinan Championship is progressing well with two races left in the regatta. Posted on 8 Mar
NZ Sailing Trust launch restores Lion New Zealand
Sir Peter Blake's Lion New Zealand will return to the Auckland Viaduct Harbour on Monday 11th March Sir Peter Blake's Lion New Zealand will return to the Auckland Viaduct Harbour on Monday 11th March at 4pm following an extensive 18 month restoration at Yachting Developments, Hobsonville. Posted on 7 Mar
Kurt Arrigo: Images of a 70kt storm hitting Malta
A storm gusting to 70kts hit Malta with massive waves pummeling the Ricasoli Breakwater Lighthouse A storm gusting to 70kts hit Malta on February 24, 2019 with massive waves pummeling the Ricasoli Breakwater Lighthouse in Valletta. Top international photographer Kurt Arrigo was on hand to capture the power of the tempest. Posted on 5 Mar
Ill-conceived ideas by spurious productions
We had NSW Labor release a preposterous policy just before the impending election During the week, we had NSW Labor release a preposterous policy in a rush just before that State's impending election. Now if one could get away with saying brain-fart, then I would have simply written that. Posted on 3 Mar
Sailing Illustrated interview Luca Devoti
Luca Devoti gave his views, on today's universally popular Sailing Illustrated bi-weekly video show Labeled a monopoly boatbuilder by World Sailing's President, top European boatbuilder Luca Devoti gave his view, mainly on matters Olympic, on today's universally popular Sailing Illustrated bi-weekly video show. Posted on 26 Feb
WindBot-COACH-660x82SCRW2019 FooterGul 2018 October - Code Zero FOOTER