sail-world.com -- Penfold Audi Sport goes carbon

Penfold Audi Sport goes carbon    

Based on your current download speed Sail-World has delivered images reduced in size (300 pixels long side). 
If you would prefer to see medium sized images (500 pixel long side) click here , or to view large images (660 pixel long side) click here.
If text only (without pictures) is your preference, click here


'Penfold Audi Sport first race, first win in the Range series in Melbourne, wind 20 to 25 gusts to 35'    Teri Dodds - copyright
Melbourne based yachtsman Dave Ellis has upgraded his Archambault A31 'Penfold Audi Sport' with a custom designed Carbon mast from NZ Spars and Rigging.

Dave sailed 'Penfold Audi sport' last season with the factory issued Alloy mast to some great results under IRC, but with Dave been the perfectionist that he is he wanted more, Everyone knew from Day 1 the alloy mast was on the softside and Dave went about looking at the options and it didn’t take long to work out carbon was the best option.

With NZ Saprs and Rigging having already rigged a number of yachts in Melbourne it didn’t take long to work out a package that would suit the Budget and give the necessary gains Dave was looking for.

The mast was built in one piece using pre preg carbon in a female mould which was cured in an autoclave with all local patching and stiffening as required co-cured internally to give a smooth out of the mould low windage finish. The low windage theme was then carried on with all fittings including the spreaders attachments exit boxes, custom designed internal rigging tangs and internal main halyard lock

Comments from a Happy Dave Ellis regarding the mast:
It is not widely understood that most European sourced production yachts have lightweight aluminium masts which are not stiff enough to provide the head stay tension required to effectively flatten the jib as the breeze builds. The mast is soft enough to depower the mainsail through the application of backstay so these boats end up with the jibs too full due to head-stay sag and the mainsails too flat because they cannot be built with enough luff round to suit the soft mast. The choice of a carbon fibre mast provides sufficient head stay straightness to allow the jib to be set up properly with the appropriate depowering tools such as jib halyard tension and jib car position.

The choice of an NZ Rigging carbon fibre mast was made on the basis of their experience with other boats on the bay such as 'Living Doll', 'Scarlet Runner', 'Veloce', 'Terra Firma', 'Spirit of DownUnder' , ' XLRB' and 'Shogun'. We were able to transfer much of this big boat technology into our own project through the inclusion of rig tuning aids such as an adjustable mast foot, easy rig set up with an internal mast jack and shims to adjust the rig tension and performance aids such as a mainsail halyard lock.

Penfold Audi Sport’s spar being being loaded at Auckland Airport -  .. .  
NZ Rigging did a wonderful job of putting together our new carbon fibre mast for the Melbourne based Archambault A31 'Penfold Audi Sport'. The mast was stepped on Monday, the boat went sailing on Wednesday and won its first race, Division 2 IRC heat one of the Club Marine Series on Saturday. The attention to detail in a relatively small project is superb with low windage terminations on the rod shrouds and flush fastenings to minimise spinnaker tears.

New Zealand Spars and Rigging, incorporating Foster Masts, is New Zealand’s largest locally owned Yacht Rigging and Spar Making operation

From the traditional dinghy classes, right through to high end international racing and cruising projects, we are fully involved in:
• Manufacture of Carbon Fibre and Aluminium masts
• Full mast and rigging service and maintenance
• Support and systems for Kitset and DIY projects

The sailing scene has changed. Cost is important, but quality, longevity, and suitability for our challenging sailing conditions, is paramount.

We are located at Northcote and Westhaven, Auckland, New Zealand, and we export all over the world. Contact us to discuss your upcoming project. Contact: Bart@nzrigging.com



by Sail-World
- 9:16 AM Wed 2 Nov 2011 GMT



Click here for printer friendly version
Click here to send us feedback or comments about this story.
If you want to send this story to a friend, please use link below
http://www.sail-world.com/indexs.cfm?nid=90247

Based on your current download speed Sail-World has delivered large images (660 pixels long side.)  If you would like to see only small images (300 pixels long side) click here .  For medium sized images (500 pixels long side) click here .  If you would prefer to see text only (without pictures) click here

Click for further information on
NZ Rigging News

Related News Stories:
02 Jul 2013  America's Cup: NZ Rigging drops the Big Boat's mast into cafe alley
20 Dec 2011  Wednesday Night Blast: Pressing the 'Go' button
01 Nov 2011  NZ Spars and Rigging instrumental to BSL's Global Ocean Race success
07 May 2010  Images: New Bakewell-White 36, General Lee is launched in Auckland
06 May 2010  Bakewell-White 36, General Lee to be launched in Auckland
20 Apr 2010  Iconic Auckland sparmaker taken over by NZ Rigging
21 Oct 2009  Cris Brodie joins NZ Rigging as a Director
08 Oct 2009  New Georgia Racing launched in Auckland
24 Aug 2009  NZ Rigging looks to top the table in big Australian regattas

Switch Default Region to:

Social Media

Asia

Australia

Canada

Europe

New Zealand

United Kingdom


http://www.sail-world.com/event_images/image/Twitter_logo_small.png http://www.sail-world.com/event_images/image/FaceBook-icon.png  http://www.sail-world.com/event_images/image/RSS-Icon.png

United States

Cruising Northern

Cruising Southern

MarineBusiness World

PowerBoat World

FishingBoating World

 

Contact

Commercial

News

Search

Contact Us

Advertisers Information

Submit news/events

Search Stories/Text

Feedback

Advertisers Directory

Newsletter Archive

Photo Gallery

 

Banner Advertising Details

Newsletter Subscribe

Video Gallery

Policies

 

 

 

Privacy Policy

 

 


Cookie Policy

 

 



This site and its contents are © Copyright TetraMedia and/or the original author, photographer etc. All Rights Reserved.  Photographs are copyright by law.  If you wish to use or buy a photograph contact the photographer directly.
XLXL NEW AUS
LocalAds   DE  ES  FR  IT