'Blocked on the left, but see the oyster growing on the right'
Ley and Neil Langford, long time cruising sailors, are in South East Asia - tropical waters - on their yacht Crystal Blues. Here Neil tells the secrets they and their fellow cruisers have developed for keeping the local crustacean population from taking over their boat while stationary in a marina.
We're spending quite a bit of time in marinas these last few months, as I'm doing some contract work and Admiral Ley needs a safe home while I'm away from the boat.
This means that our sea water cooled refrigeration and airconditioning systems are running frequently in estuarine waters with a very high fouling capability.
Coming from a relatively cold water background, I'm still amazed at how quickly an anchor, or chain, or in this case a raw water inlet, can become completely fouled by marine growth in these warm water areas. The image at right shows the problem - the hose tail at left is almost closed with barnacles, and the hose tail at right has a decent oyster growing - just what we don't want.
When we look at the hose, the situation is obviously worse. Large clusters of barnacles and yet another oyster are almost completely blocking the inlet hose. Note this is 1.5' (40mm) hose, that feeds a manifold with multiple outlets for refrigeration, air conditioning, deck wash, genset etc.
Inlet hose 1 - .. .
To counter the problem we now place a chlorine tablet in our raw water strainer every other day, when we're in a marina. We use standard swimming pool chlorine tablets, that dissolve in just a few minutes after placement. These do a great job of stopping the growth from the strainer basket onwards, and they clean up the hoses really well, but they can't help with the hose and fittings that are in line before the strainer.
So now we replace that hose every twelve months - a half day boat project that keeps the systems running and my back and shoulders in fine trim (its a b**g*r to get at), and my knuckles suitably skinned. Boat jobs.
Along the west Malaysian coast, from Singapore to Langkawi and northwards into Thailand, this type of fouling is all to common.
In Kuah Harbour (Langkawi), the long term cruisers know that you must lift your anchor chain by 4 or 5 meters one day, and then lower it back again the next day, in a never ending alternating sequence, to stop the aggressive growth there from fouling the chain that is between the water surface and the muddy bottom.
This really does work, though nothing will stop the change to the chain galvanising caused by the very special mud in Langkawi. But that's another story.....
To learn more about Crystal Blues and her crew, to to their blogspot?nid=113070.
by Neil Langford, Crystal Blues - 9:01 PM Sat 10 Aug 2013 GMT
Click here for printer friendly version
Click here to send us feedback or comments about this story.
If you want to send this story to a friend, please use link below
Based on your current download speed Sail-World has delivered large images (660 pixels long side.) If you would like to see only small images (300 pixels long side) click here . For medium sized images (500 pixels long side) click here . If you would prefer to see text only (without pictures) click here
Click for further information on
Related News Stories: