sail-world.com
 
 
News Home Video Gallery Photo Gallery
Sail-World.com : Safran innovating once again with new revolutionary mast
Safran innovating once again with new revolutionary mast

'A new revolutionary mast for Safran'    Francois Van Malleghem

Safran is innovating once again; a new ballast system, a new titanium keel, and now a new mast with a 3D woven carbon mast track, which is something completely new in the world of ocean racing. Safran is bringing together expertise from within the Group and from outside. The weight savings and improvements in terms of performance and reliability are 'huge'. We find out more.

'This new mast is the result of a lot of different people working together,' explained Guillaume Verdier, the designer and person in charge of the construction of this new 28 metre long spar. 'The real innovation is on its rear side, with a 3D woven carbon track, formed in the same way as Jacquard cloth is produced and which will withstand the strains, unlike a traditional track,' summed up the designer. 'That means we have been able to make weight savings high up and offer improved reliability thanks to this process and to a completely new way of looking at the attachment points. This innovative work from the team was only possible thanks to the resources within the Safran Group and Hervé Devaux’s HDS calculation team, who went over my static calculations again and again. What with the calculations and designs, together with the architects that work alongside me, Romaric Neyhousser and Hervé Penfornis, we have spent a lot of time over several months to come up with this innovation.'

The original idea was decided on at the same time as the keel change (the titanium one), and the overall philosophy of this new mast was as follows: it had to be lighter, offer better performance, be more reliable and with an overall cost not exceeding 20% more than a classic mast. Guillaume Verdier explains: 'We didn’t begin with a blank sheet of paper, as the initial choice was to keep the basic arrangement of the first two masts, in other words, it rests on the deck and has three layers of spreaders. We didn’t want to take any risks by completely changing the concept, with for example a mast with two layers of spreaders or a wing-mast, which are both more flexible and subject to dynamic forces. We gradually made headway working together: I was involved with the conception and design, Hervé Devaux at HDS checked over my static calculations, Bruno Dambrine at Safran offered us his experience of the 3D woven technology and then, there was also Snecma and Safran Engineering Services (subsidiaries of the Safran Group) working on dynamic calculations. Thanks to digital modelling and the means available at Safran, we were able to carry out simulations at each stage of the job concerning the behaviour of the boat and mast, for example, seeing what happens, when she slams into a wave. Thanks to that, we were able to identify strains in certain places that we couldn’t see simply by using static calculations.' These dynamic calculations, used by Safran in particular for their crash tests, are a new concept in ocean racing, and enabled the team to advance towards this highly innovative mast. 'We also included the data we already had thanks to the sensors measuring acceleration on board the boat, when she had her previous masts. At each stage, we knew if we were on the right track or if we had things to correct.'

The actual weight savings are obviously confidential. But they are 'huge', according to Jean-Marie de la Porte, Safran’s project manager. If we are looking at a boat, we need to consider everything, and it is no surprise to anyone that saving weight high up, is something everyone looks for, 'as when you save one unit on top, you can take three times that from the keel bulb, for example,' explained Guillaume Verdier. We end up with a boat that is stiffer, which cuts through the waves more easily, which pitches less, and so is faster.

Returning to the 3D woven technology, this is a process developed in the Safran Group, which involves weaving together carbon threads using the same principle as on a traditional loom. This technology used in the design of parts for the aircraft industry means that it is possible to obtain mechanical specifications, which are much higher than using traditional carbon. 'The design of this new mast involved calling upon the services of experts within the Safran Group as well as from outside, and this was an extremely enjoyable experience,' stated Jean-Marie de la Porte. In the end, as with the two previous masts, it was built at Marstrom’s in Sweden. 'This is the conclusion of this renovation of the boat, which began with the replacement of her keel and the modification of the ballast system.'

As for the final result, we leave that to Marc Guillemot to explain. What did he see at the recent Guyader Grand Prix, which was the first opportunity to try out the mast in a race? 'There were two goals: reliability and weight savings, and so consequently improved performance. As far as the reliability is concerned, that is something we’re going to have to wait to judge, but in theory, knowing that we’re not going to see the mast track snap off, thanks to the 3D woven carbon, that is something very positive. As for the savings in weight, that is something we can see already: it is a high percentage and the goal has well and truly been achieved.' Out on the water? The reply is clear: 'What I felt since the trails has been confirmed: we’ve made considerable progress. We see that in every point of sail, particularly sailing upwind. Last year, as you might expect, we were lagging behind the boats from Safran’s generation,which were built afterwards (PRB, Macif, Banque Populaire, etc), but now we’re back up with them. Combined with the new ballast system and the new keel, this work we have done together is rather like pushing the reset button. For the moment, it’s very encouraging.'

To see the video of the new mast click here.

A new revolutionary mast for Safran -  Francois Van Malleghem   Click Here to view large photo

Safran Sailing Team website


by Soazig Guého

  

Click on the FB Like link to post this story to your FB wall

http://www.sail-world.com/index.cfm?nid=97109

8:16 AM Fri 11 May 2012GMT


Click here for printer friendly version
Click here to send us feedback or comments about this story.







News - USA and the World



















HUD Vision: An interview with Afterguard Marine’s Alex Moret *Feature by David Schmidt, Sail-World USA Editor, Seattle














America's Cup: Expected de Ridder penalty should be reduced *Feature by Richard Gladwell/Sail-World.com/nz, Auckland, NZ
















Congressional Cup - Victory for Taylor Canfield and crew by Rich Roberts (As Amended by ISAF),




2014 Halifax – Saint-Pierre Ocean Race by Patricia Nelder, Nova Scotia














Image Gallery: Stratis SL33 flies on the Waitemata
Audi Melges 20- Sperry Topsider Charleston Race Week - Light final day
Clipper Round the World Yacht Race - PSP Logistics prepares for USA
ISAF Sailing World Cup Hyères - Crème of the crop to compete
Congressional Cup: Luna Rossa makes podium in first event
Int 14 World Championships 2015 launch new event website
International Optimist Regatta Clinic and Team Race - Register now!
Congressional Cup: World top rankers finish that way in Long Beach
Sperry Top-Sider Charleston Race Week Day 3 finale
America's Cup: Gino Morrelli outlines the new AC62 design
Doyle Sails New Zealand signs Andrew Brown as One Design Manager
America's Cup: Dean Barker's Blog - A sail with the Duke and Duchess *Feature
29er World Youth Sailing Week Easter regatta - Day 1 and 2 overall
C Thomas Clagett Jr Memorial Clinic/Regatta - Entries start to roll in
50th Congressional Cup: See the delayed coverage and media conferences
Clipper Race 10 Day 27: Closing stages - Qingdao to San Francisco
Canfield, Williams, Bruni, Swinton in Congressional Cup final four
Sperry Top-Sider Charleston Race Week - Day 2
Audi Melges 20 Charleston Race Week - Perfect conditions in Charleston
Oyster Regatta Antigua - Full on ocean conditions for day 3
PWA World Tour - A taste of things to come at La Torche + Video   
Women's International Match Racing Series kicks off in June   
Melges 32 Audi Tron Sailing Series - Action shots by Max Ranchi   
Clipper Round the World Yacht Race - Frustrating conditions   
Man rescued after falling overboard in Pacific taken to hospital   
Sperry Top-Sider Charleston Race Week 2014 - Youth leading Melges 20   
Congressional Cup - Canfield leads toward Congressional Cup sailoffs   
Sperry Top-Sider Charleston Race Week 2014 - Perfection for Day 1   
America's Cup: Coutts claims ISAF Jury on a crusade, backs Kiwi report *Feature   
Clipper Round the World Yacht Race - Will light winds hamper progress?   
Les Voiles de St. Barth - Preparing to rock Saint Barthélemy waters   
Clipper Round the World Race - OneDLL and Qingdao now in San Francisco   
America's Cup: Emirates Team NZ up against funding hurdle for year *Feature   
Melges 32 Sailing Series Napoli - Day 1 images by Stefano Gattini   
50th Congressional Cup: View the Live racing here   
Melges 32 Sailing Series - Napoli action shots by Max Ranchi   
Volvo Ocean Race - Team Alvimedica launch new boat   
Emirates Team NZ: Royals duke it out on the Waitemata   
2014 Charleston Race Week - Thousands of sailors descend on Charleston   
The Congressional Cup 2014 - Williams hangs on with a classy crowd   


For this week's complete news stories select    Last 7 Days
   Search All News
For last month's complete news stories select    Last 30 Days
   Archive News







Sail-World.com  


















Switch Default Region to:

Social Media

Asia

Australia

Canada

Europe

New Zealand

United Kingdom


http://www.sail-world.com/event_images/image/Twitter_logo_small.png http://www.sail-world.com/event_images/image/FaceBook-icon.png  http://www.sail-world.com/event_images/image/RSS-Icon.png

United States

Cruising Northern

Cruising Southern

MarineBusiness World

PowerBoat World

FishingBoating World

 

Contact

Commercial

News

Search

Contact Us

Advertisers Information

Submit news/events

Search Stories/Text

Feedback

Advertisers Directory

Newsletter Archive

Photo Gallery

 

Banner Advertising Details

Newsletter Subscribe

Video Gallery

Policies

 

 

 

Privacy Policy

 

 


Cookie Policy

 

 



This site and its contents are © Copyright TetraMedia and/or the original author, photographer etc. All Rights Reserved.  Photographs are copyright by law.  If you wish to use or buy a photograph contact the photographer directly.
X6XL NEW US