|
Sail-World.com : How to make your cruising sailboat visible to sea monsters!
How to make your cruising sailboat visible to sea monsters!
|
|
|
'Will he see you, and even if he does, will he have time to change course?'
.
|
Did you know that huge ships often have their radar antenna mounted high on the aft superstructure? It may not pick up your cruising sailboat until it's within three miles. At 20 knots, the ship will cover three miles in nine minutes. How can you make yourself more 'radar visible'?
Let's say you are planning a cruise from Florida to the Bahama Islands across the Gulf Stream. Large northbound ships tend to ride the current to ports like New York or Boston. And they often steam at speeds of 20+ knots!
 | This container ship has its radar antenna mounted high on the aft superstructure. It might not pick up a small cruising sailboat until it's within three miles. At 20 knots, it will cover three miles in 9 minutes. How can you make your sailboat more 'radar visible'? - IStock .com |
In the best conditions, those ships will not pick you up on radar until you are within 3 miles. This means the ship's officer has only nine minutes to avoid collision after picking up your vessel's 'blip' on radar (3 miles / 20 knots = .15 hours, or 9 minutes). That's not a lot of time to turn a monster 1200 foot long ship that weighs over 110,000 gross tons!
Secret of a Good Reflective Surface:
In his book, 'Radar for Mariners', author Dr. David Burch emphasizes the importance of size and height for a target to produce a good reflective surface that can be picked up by a radar beam.
Small cruising sailboats don't have enough reflective surface area--or size--to return a decent signal back to the ship. A thin mast, sailboat sails, and a hull close to the water offer poor reflective qualities. In tough weather, less reflective surface will be returned when you are in the trough of a wave.
Compare a radar beam to a pebble dropped in a tub of water. Waves go out from the center of the splash and continue to travel until they find a good reflective surface. As soon as the waves hit the sides of the tub, they reflect back toward the origin--or where the pebble was dropped.
To make sure that radar 'waves' bounce off of your small cruising boat, you will need two or more large radar reflectors, hoisted high up off the water. That's even more important in sailboats because when you heel over, your height decreases.
Three Steps to Become More 'Radar Visible'
Follow these tips to purchase, position, and align radar reflectors on any small cruising sailboat:
1. Purchase two radar reflectors that use the principle of corner reflection. These have three flat square or round plates that bisect one another at ninety degree angles. This type of reflector performed better than more expensive ones in recent tests.
2. Hoist each reflector as high as possible in the sailing rigging. Use the mast, backstay, or shrouds.
3. Align the reflector so that the plates on top form a 'V' when pointing straight up. This 'rain-catcher' position aligns the reflector in the proper way when your small sailboat heels over.
As a sailing skipper, you need to make your small cruising sailboat highly radar visible to those sea monsters that ply the shipping lanes day and night. Follow these sailing tips to keep your sailing crew safe and sound anytime you cruise near the busy shipping lanes of the world.
Captain John shows sailing skippers the skills they need for safer sailing anywhere in the world. Visit his website at www.skippertips.com for sailing skills articles, video tutorials, and a free newsletter.
by Captain John Jamieson
Click on the FB Like link to post this story to your FB wall
http://www.sail-world.com/index.cfm?nid=85648
2:40 AM Fri 8 Jul 2011 GMT
Click here for printer friendly version
Click here to send us feedback or comments about this story.
|
|
|
Our Advertisers are committed to our sport, please support them!
This site and its contents are © Copyright TetraMedia Pty. Ltd and/or the original author, photographer etc. All Rights Reserved.
Photographs are copyright by law. If you wish to use or buy a photograph you must contact the photographer directly (there is a hyperlink in most cases to their website, or do a Google search.) with your request.
Please do not contact
Sail-World.com
as we cannot give permission for use of other photographer’s images.
Only if the photographer named on the image is Sail-world.com, Powerboat-world.com, Marinebusiness-world.com or NZBoating-World.com.
Contact us
.
Ph: +61 2 8006 1873
or complete our
feedback form
Contact us
.
View our Privacy Policy.
[ Go Home]
[ Banner Advertising Specification]
[Bot Archive ]
Customised news feeds -Marine Industry companies, Clubs and Associations have their own customised version of our news feed on their website.
Look_here_to_see_examples
|
CLD
| | |
