sail-world.com
 
 
News Home Cruising Photo Gallery Video Gallery

 

Sail-World.com : Lewmar Deck Switch Advisory Notice

Lewmar Deck Switch Advisory Notice

.
Electric deck switches operate in a hostile environment and are subject to salt water, extremes of temperature, direct sunlight and UV effect. They are also susceptible to wear and tear following repeated use and can in some instances suffer accidental damage during boat operations. It is therefore recommended that regular visual and functional inspection of the switch, the circuitry and the equipment being controlled is carried out by a competent qualified person on a regular basis.

If any defects are noted on the switch (see point 2.0 below), replacement is mandatory so as to avoid the possibility of a malfunction. It is further recommended that an item of this nature is not intended to remain in service forever. The lifespan will depend upon the weather and UV conditions to which the switch is exposed as well as the amount of use. Therefore, a service lifespan of 3 to 5 years from date of purchase can be expected, after which time it should be replaced. Shorter lifespans could be experienced and the following inspection recommendations are therefore important in ensuring continuing safe operation.

Inspection
1.0 The deck switch and the system it controls should be fully tested in a ‘No Load’ condition prior to full functional operation as per it’s design purpose, before every trip, activity or task. Only after the skipper has satisfied themselves of the safe and functional operations should the equipment be used.

2.0 The deck switch should be inspected pre-departure or use paying particular attention to the following:
2.1 Ensure there is no visible damage to the switch
2.2 Ensure there is no noticeable wear to the switch, it’s housing, it’s button or fixings
2.3 Ensure the rubber membrane over the switch is not sticky or has any deposits or residue from cleaning fluids or other prohibited materials
2.4 Ensure the rubber membrane over the switch does not show any signs of cracks, splits or signs of degradation. This includes a change in colour from shiny to a matt finish
2.5 The main switch housing should not have any visible chips or cracks
2.6 The switch should have a smooth positive feel with a distinct click that can be felt at the point of operation
2.7 There should be no signs of water ingress on any part of the switch assembly
2.8 Ensure that the fixings screws and seal to the deck bulkhead or coach roof are secure, and remain effective in both securing the switch and preventing water ingress
2.9 The switch should not feel spongy and should not make a squelch or bubbling noise due to water ingress when depressed and operated

Note
If any of the points highlighted in 2.0 through to 2.9 are detected during inspection, the deck switches should not be used and should be replaced.

3.0 On an annual basis the deck switch should be removed by a qualified electrical technician to carry out the following:
3.1 All the checks detailed in 2.0 – 2.9 of this product service update
3.2 Inspect the underside of the deck switch for signs of corrosion, damage or water ingress
3.3 Inspect the wiring for signs of loose connections or corrosion
3.4 In open circuit mode (OFF) condition the resistance should be checked for a recording on the test meter beyond measurement to confirm no electrical connection.
3.5 In closed circuit mode (ON) condition, the resistance should be less than 3 ? (ohms)
3.6 If the switch shows any signs of excessive wear, degradation in it’s action, water ingress or loss in it’s electrical resistance properties, it should be changed immediately

Additional Guidance
4.0 It is the responsibility of the skipper to ensure that crew members are trained in the operation of powered deck equipment and use it in a safe and appropriate way within it’s designed operating parameters. This includes what to do in an emergency.

4.1 It is the responsibility of the skipper to ensure that crew members are appropriately briefed on all three methods of equipment isolation in event of emergency, i.e :-
4.1.1 The switch itself and it’s operation
4.1.2 The circuit breaker on main panel
4.1.3 The main battery isolation

4.2 Crew briefings should always cover the following issues pertaining to deck switch operated equipment:-
4.2.1 Safe operation of any powered deck equipment.
4.2.2 What to do in the event of an emergency
4.2.3 What not to do in event of emergency
4.2.4 A practical demonstration of the effective isolation of deck equipment as highlighted in point 2 above

4.3 Deck switches are designed to be used in conjunction with Lewmar equipment only. If they are to be used for the powering of any other electrical equipment the intended use should be checked against the specification of the switch.
4.4 Deck switches should only be operated with fingers, bare feet or soft soled shoes.
4.5 Switches should be left with the lid closed to minimise environmental degradation and the potential for accidental operation.
4.6 Powered deck equipment should always be isolated when not in use to prevent accidental start up.
4.7 The instructions for the equipment being operated should always be read and followed.
4.8 Power washers should not be used on or near any switch.
4.9 It is acknowledged that deck switches will need to be washed down as part of a deck cleaning process.
However, direct flow from a non pressure hose should not be aimed at the switch.
4.10 The deck switch itself should only be cleaned with a mild soap and washed off immediately with a light application of fresh water.

4.11 The following (non exhaustive) list of substances should not be applied, or used on or near any deck switch. Products include but are not limited to:-
4.11.1 Chemicals
4.11.2 Deck cleaners
4.11.3 Petroleum based fluids/cleaners
4.11.4 Deck polish
4.11.5 Deck brightener
4.11.6 Varnish/lacquers/paints
4.11.7 Oil

Specific Considerations for Winch Operation Manual B2303 Issue 7

Winch Operation
Please ensure that you thoroughly understand the operation and safety requirements of the winch before commencing the installation. Only persons who are completely familiar with the controls and those who have been fully made aware of the correct use of the winch should be allowed to use it. If there is any doubt of how to install or operate this unit please seek advice from a suitably qualified engineer.

• Winches used incorrectly could cause harm to equipment or crew.

• Winches should be used with care and treated with respect.

• Sailing, like many other sports can be hazardous. Even the correct selection, maintenance and use of proper equipment cannot eliminate the potential for danger, serious injury or death.

• Lewmar winches are designed and supplied for line control in marine applications and are to be used in conjunction with appropriate clutches, cleats and other manual controls and stoppers.

• It is the unavoidable responsibility of the owner or master or other responsible party to assess the risk of any operation on the vessel.

• Under no circumstances should any self tailing winch be used in self tailing mode for any lifting operation;
rather suitable and adequate manual tailing should be arranged with proper means of manually cleating or stopping the hoist.

• Every winch should be installed with adequate means of manually cleating or stopping the loaded ropes.

Specific Considerations for Windlass Operation Manual 65001201 Issue 2

Windlass Operation
Classification Societies and Lewmar require that a vessel at anchor must have its rode held by a chain stopper or equivalent strong point at all times!

At all times it is the responsibility of the boat user to ensure that the anchor and rode are properly stowed for the prevailing sea conditions. This is particularly important with high-speed powerboats, because an anchor accidentally deploying while under way can cause considerable damage. An anchor windlass is mounted in the most exposed position on a vessel and is thus subject to severe atmospheric attack resulting in a possibility of corrosion in excess of that experienced with most other items of deck equipment. As the windlass may only be used infrequently, the risk of corrosion is further increased. It is essential that the windlass is regularly examined, operated and given any necessary maintenance.

Please ensure that you thoroughly understand the operation and safety requirements of the windlass before commencing the installation. Only persons who are completely familiar with the controls and those who have been fully made aware of the correct use of the windlass should be allowed to use it. If there is any doubt of how to install or operate this unit please seek advice from a suitably qualified engineer.

• Windlasses used incorrectly could cause harm to equipment or crew.

• Windlasses should be used with care and treated with respect.

• Sailing, like many other sports can be hazardous. Even the correct selection, maintenance and use of proper equipment cannot eliminate the potential for danger, serious injury or death.

• Lewmar windlasses are designed and supplied for anchor control in marine applications and are not to be used in conjunction with any other use.

• It is the unavoidable responsibility of the owner or master or other responsible party to assess the risk of any operation on the vessel.

Additional Information
Lewmar recommends the use of appropriate Personal Protective Equipment and hands free communication equipment by any person going aloft, and only then where the person going aloft is properly trained in the use of that equipment and where there remain sufficient trained and experienced personnel on deck to ensure constant observation and the continued safe conduct both of the vessel and the hoisting operation.

Lewmar website




by Lewmar Marine

  

Click on the FB Like link to post this story to your FB wall

http://www.sail-world.com/index.cfm?nid=85246

11:34 AM Tue 28 Jun 2011 GMT






Click here for printer friendly version
Click here to send us feedback or comments about this story.


News - USA and the World



























ISAF Sailing World Championships - Watch medal races live here by Dan Ibsen, Sail-World Europe & UK editor,








470 Men and Women Worlds - Vadlau and Ogar into pole position by 470 International Association Class,




ISAF Sailing Worlds, Santander - Strong competition for RS:X fleets by Olga Maslivets, International RS:X Class Assoc.,




























Rio 2016 Daylight the issue for Olympic sailing regatta
ISAF Sailing World Championships - USA 470's and Lasers battle at top
ISAF Sailing World Championships - Santander - Day 5 video highlights
ISAF Sailing World Championships - Santander images by Jesús Renedo
PWA Cold Hawaii World Cup - No action on day 2
470 Men and Women Worlds - Game on for Olympic Qualification
ISAF Sailing World Championships: Finns off to slow start in Santander
ISAF Sailing World Championships - Seesaw Day 5 in Santander + Video
ISAF Sailing World Championships - 470 sailors shine in Santander
Royal Cup Marina Ibiza - Kiwi Ray Davies returns to TP52 fleet
Starboard Hatteras Wave Jam - No windsurfing action on day 1
A complete recap of the most successful Melges 20 World Championship
Rolex Big Boat Series - Prizegiving images by Chuck Lantz
ISAF Santander - Upwards path for Austrian women's 470 crew + video
18ft skiffs: Carnage compilation from the glory days of the Grand Prix
ISAF Worlds: Video from the British Sailing Team
Bart's Bash expected to set new records this weekend
PWA Cold Hawaii World Cup - Marcilio Browne wins Super Session
470 Men and Women World Championships - Racing abandoned on day 2
ISAF Sailing World Championships - Day 4 images from Santander
ISAF Sailing Worlds, Santander: Emerging Nations Program sailors shine   
ISAF Sailing Worlds, Santander - Teasing winds play havoc on day 4   
ISAF Sailing World Championships: Hot conditions in Santander on day 4   
Santander ISAF Sailing World Championships joins Bart’s Bash   
PWA Cold Hawaii World Cup - Grounded fishing boat creates problems   
Marseille One Design - GC32 Armin Strom Sailing Team emerge victorious   
Rolex Big Boat Series 2014 - Ready for another 50 years   
2014 Rolex Big Boat Series - Farr 40 Day 4   
2014 Rolex Swan Cup - Eleventh-hour victories   
Extreme Sailing Series - Kiwis clinch Act win in Istanbul + Video   
2014 Rolex Big Boat Series - Two long races today for the J70 fleet   
2014 Rolex Big Boat Series - Impressive to sail out of the Golden Gate   
Extreme Sailing Series - Istanbul delivers four days of great racing   
ISAF Sailing Worlds Santander - Day 3 images by Sail-World.com   
Extreme Sailing Series: Emirates Team NZ bounces back for series win   
Santander 2014 ISAF Worlds - Light winds and current test six classes   
ISAF Sailing World Championships - Solid Day 3 for US Sailing Team   
ISAF Sailing World Championships - Day 3 images by Jesus Renedo   
Marseille One Design 2014 - GC32 Armin Strom blitzes final day   
Volvo Ocean Race 2014-15 - Una Etapa 0 complicada para todos   


For this week's complete news stories select    Last 7 Days
   Search All News
For last month's complete news stories select    Last 30 Days
   Archive News







Sail-World.com  


















Switch Default Region to:

Social Media

Asia

Australia

Canada

Europe

New Zealand

United Kingdom


http://www.sail-world.com/event_images/image/Twitter_logo_small.png http://www.sail-world.com/event_images/image/FaceBook-icon.png  http://www.sail-world.com/event_images/image/RSS-Icon.png

United States

Cruising Northern

Cruising Southern

MarineBusiness World

PowerBoat World

FishingBoating World

 

Contact

Commercial

News

Search

Contact Us

Advertisers Information

Submit news/events

Search Stories/Text

Feedback

Advertisers Directory

Newsletter Archive

Photo Gallery

 

Banner Advertising Details

Newsletter Subscribe

Video Gallery

Policies

 

 

 

Privacy Policy

 

 


Cookie Policy

 

 



This site and its contents are © Copyright TetraMedia and/or the original author, photographer etc. All Rights Reserved.  Photographs are copyright by law.  If you wish to use or buy a photograph contact the photographer directly.
XLXL WAS US
LocalAds   DE  ES  FR  IT