News Home Video Gallery Newsletters Photo Gallery Cruising Int
Sail-World.com : Love your sailing boat's belts and they will love you in return
Love your sailing boat's belts and they will love you in return


'Tension should be ’just right’ in the belt'    .

When did you last replace the belts in your sailing boat's diesel engine? You didn't? Then you are waiting for the belt to snap just when you need it least. Let's face it, belts are not so expensive, and changing them regularly, rather than waiting until they snap, is the smart road to trouble free sailing.

Not that these belts - the alternator, auxiliary alternator, raw-water pump and circulator pump — won't typically provide really reliable and trouble-free service as long as they are properly maintained. But they do have a life, and replacing them on a sunny day in harbour is a comparatively pleasant job, compared with doing the same job in a lumpy sea when there's a crew, or worse, guests, wanting to get home.

The belts used to drive these accessories are of the 'V' variety or ribbon-shaped flat serpentine belts. Often, one V belt may do double duty, sending life from the crankshaft pulley to both the alternator and coolant pumps, while another belt will help drive the raw-water pump.

You can help elongate the life of a belt of course. One of the most important factors that affects belt life is making sure it is properly tensioned when it is installed, that the proper tension is maintained throughout its service life and it doesn't slip.

The regular inspection:
1. Check that the belts are tight — tight enough so they don’t slip, but no tighter. Follow the manufacturer’s recommendation for belt tension, don't just guess, or use old-fashioned 'rule of thumb' rules. If a belt is slipping, it won’t turn its related accessory properly, and it will wear out and break prematurely. If it’s too tight, it will accelerate wear on bearings and seals. If you see any evidence of belt dust on the front of the engine or the alternator casing, the belt is either slipping or misaligned. If the belt and/or pulley shows signs of glazing — a particularly smooth, shiny appearance — it means the belt is slipping. A glazed belt must be replaced, but the glaze on a pulley can be 'dressed' using 220-grit sandpaper.

Correcting the tension:
To tension a belt, use a breaker bar as a lever to pry the accessory away from the crankshaft pulley, and then tighten the fixing bolt. Threaded 'spreader' tools are available to make this task easier. Finally, ensure that each belt’s profile properly matches every pulley over which it turns. The belt should be even with, or stand slightly proud, no more than 1/16 inch, from the top of the pulley walls.

Self-adjusted tension and pulley bearings:
On engines with a single serpentine belt, tension is usually self-adjusted automatically via a spring-loaded tensioner. No additional adjustment is necessary. If this is the case, check the tension pulley bearing. When the belt is removed, the pulley must spin freely with no rough spots detected under hand pressure.

Continually replacing belts?
If this is the case, misaligned pulleys could be your problem. Alignment can be checked with a straightedge. If a pulley is bent or not on the same plane as the rest, the problem should be corrected, or the 'bad' pulley will continue to ruin belts.

Allowing a tired belt to keep working: Give your belts the break they need. Deteriorating belts can cause collateral damage to the alternator. A chronically slipping alternator belt can create large amounts of fine dust. The issue arises when this belt dust is drawn into the alternator with the cooling air. If the rubber dust-like debris makes contact with the hot components within the alternator, it will melt and adhere to them, creating a harmful insulating blanket coating the bearings, windings, diodes and heat sinks, potentially causing failure. Not a nice outcome!

How often should they be replaced?
As belts are pretty cheap in the scheme of things, it’s wise to replace them, say, during the annual check. Never leave them past 2,000 hours, whichever comes first. Having said that, it's also wise to replace them when you are embarking on a long voyage. But not JUST before you go, because in the first 50 to 100 hours of use the belt may need retensioning or some adjustment. So do it well enough in advance so that you can trouble-shoot before you leave.

Do all of the above and you are giving yourself the best chance of carefree sailing.


by Des Ryan/ Sail-World Cruising round-up

  

Click on the FB Like link to post this story to your FB wall

http://www.sail-world.com/index.cfm?nid=108463

1:49 AM Tue 16 Apr 2013GMT


Click here for printer friendly version
Click here to send us feedback or comments about this story.

Click for further information on
Practical

Related News Stories:

06 Apr 2013  Something to ponder - Is your GPS system 100% safe?
05 Apr 2013  World's tiniest PLB now certified for use
05 Apr 2013  World's tiniest PLB now certified for use
31 Mar 2013  Paper charts essential for the prudent sailor - or are they?
29 Mar 2013  Sail clear of these three dangerous wreck symbols!
29 Mar 2013  Paper charts essential for the prudent sailor - or are they?
16 Mar 2013  Getting your boat to shine in all weathers
12 Mar 2013  Secure attachment innovation iPad/iPhone for sailing boats
11 Mar 2013  T200 thermal camera - ideal for smaller sailing boats
10 Mar 2013  Use the Magic of S.T.O.P. for Safer Sailing Navigation
MORE STORIES ...






Cruising USA







Barnacle Busting by Neil and Ley Langford,


From Penguins to Polar Bears by Cherie Winner,




Polar research: Six priorities for Antarctic science by Mahlon C. Kennicutt II and colleagues,




NCI granted dedicated VHF Channel by National Coastwatch,


Positive news for cruising boats in Greece by The Cruising Association,




















Risks to penguin populations continues by British Antarctic Survey,




Follow these tips when anchoring by Alex and Daria Blackwell,


Galley Guys meet the Spice Lady by Greg Nicoll, Andy Adams and John Armstrong,




If all else fails read the instructions!! by Stuart Carruthers, RYA Cruising Manager,




Phuket Yacht Show: new kid on the block taking on PIMEX? *Feature by Guy Nowell, Sail-World Asia and Phuket Yacht Show,






Flags at Sea, an infographic by John Tissott by Anna Parker and the Sail-World Team,








Teen names latest RNLI Shannon class lifeboat in Poole + Video
Fascinating opportunity with OceansWatch
Fake GPS signals detected when cruising the high seas
Our new Cruising Editor editor remembers his first offshore adventure
Blue Planet Odyssey - Jimmy Cornell playing catch up on North West Pa
World ARC 2014 reaches Australia
Venezuelan Port Control lift recent port restrictions.
Seismic survey ship operating north of Aruba and Curacao
Predictwind helps you pick the best time to depart
Watch this whale lift a Kayak clear out of the water
World ARC reaches half-way point in Australia
Northern Scotland: Voyage to Orkney and Shetland Isles (Part 2) *Feature
Drowning or electric shock? What you need to know to help save a life
Costa Concordia - the $2.25 billion salvage operation ready to begin
Northern Scotland: Voyage to Orkney and Shetland Isles, more photos *Feature
Fort Lauderdale International Boat Show - New location and attractions
Long Island waters could become more taxing this summer
4.8 million Legos all at sea
Tranquil, colourful and funky, Genoa Bay is a must stop for West Coast *Feature
Scientist pioneered tracer to reveal hidden ocean flows
Sail-World 2.0 - the Beta version- Please take a look   
Dredging activity near corals can increase frequency of diseases   
World ARC heading out of the Pacific   
Understanding the Ocean's role in Greenland Glacier melt   
Desolation Sound added to Salish Sea Pilot free cruising guides   
Three Defensive Docking Strategies for Sailors   
Revealing report on Search for American yacht Nina released *Feature   
PredictWind's Weather Routing opens your navigation options - try it!   
Sail-World Cruising Founding Editor Nancy Knudsen says farewell   
Book review: Weather - you like it or not   
Vaavud launches generation 2 wind meter   
The drama begins - North West Passage sailors rescued from ice   
Entering an unfamiliar bay - decision time   
Baby Nemos finding their way home   
High Latitude Sailing - Book of the Week   
Will the Olympics make a difference to Rio pollution? *Feature   
Blue Planet Odyssey, around world rally, begins   
Africa Europe Cruising Challenge now open for entries   
The real ‘Supermoon’ story   
Warm and noisy welcome for Oceans of Hope in La Rochelle   


For this week's complete news stories select    Last 7 Days
   Search All News
For last month's complete news stories select    Last 30 Days
   Archive News







Sail-World.com  


















Switch Default Region to:

Social Media

Asia

Australia

Canada

Europe

New Zealand

United Kingdom


http://www.sail-world.com/event_images/image/Twitter_logo_small.png http://www.sail-world.com/event_images/image/FaceBook-icon.png  

United States

Cruising Northern

Cruising Southern

MarineBusiness World

PowerBoat World

FishingBoating World

 

Contact

Commercial

News

Search

Contact Us

Advertisers Information

Submit news/events

Search Stories/Text

Feedback

Advertisers Directory

Newsletter Archive

Photo Gallery

 

Banner Advertising Details

Newsletter Subscribe

Video Gallery

Policies

 

 

 

Privacy Policy

 

 


Cookie Policy

 

 



This site and its contents are © Copyright TetraMedia and/or the original author, photographer etc. All Rights Reserved.  Photographs are copyright by law.  If you wish to use or buy a photograph contact the photographer directly.
XLXL NEW Cru USA
LocalAds   DE  ES  FR  IT