Please select your home edition
Edition
J Composites J/99

Volvo Ocean Race –La flota se despega de la costa con MAPFRE en cabeza

by Volvo Ocean Race on 21 Apr 2015
MAPFRE - Volvo Ocean Race 2015 Ainhoa Sanchez/Volvo Ocean Race
Volvo Ocean Race – Tras un comienzo de etapa dolorosamente lento, la flota finalmente consiguió salir de Itajaí. Team Alvimedica dejó la bahía en primer lugar, con la motivación extra que supone dirigirse a su puerto base, Newport, Rhode Island.



Costó avanzar hacia el Noreste, dirección a altamar, lejos de los efectos térmicos de tierra. A las 22:00 UTC la flota se encontraba con algunas nubes de lluvia más problemáticas para unos que para otros.

Team SCA y Alvimedica no consiguieron aprovechar una racha que les vino de cara, mientras que MAPFRE y Abu Dhabi Ocean Racing le sacaron el mayor partido, aumentando su liderato hacia el Norte antes de virar hacia el Este otra vez, hacia la flota, a medianoche.



Todos los equipos navegan en estos momentos a velocidades muy parecidas, con sólo 0,2 nudos de diferencia entre el más lento y el más rápido. Sólo hay 12 millas de separación de la flota de norte a sur, y 8 millas de este a oeste. No se esperan cambios en las condiciones durante las próximas 12 horas.



Una baja presión se genera a sus espaldas

Pero si podrían darse en los próximos días. El meteorólogo de la Volvo Ocean Race, Gonzalo Infante, explica que el viento con el que navegan ahora viene generado por una moderada alta presión al este de la flota.

Esto provoca numerosas tormentas con aparato eléctrico, nubes en aumento, y es también el origen de muchas bajas presiones. De hecho, Infante señala que espera que se genere una baja presión, pero de poca intensidad.



Aun así, esto podría generar viento, de la misma dirección que el que sopla en estos momentos aproximadamente -o algo más de Norte-, lo que podría llevar a la flota a alejarse más de la costa. Si el sistema finalmente se desarrolla mañana, habrá más viento y lluvia. Éste podría desplazarse hacia el Este, y la cuestión será si la flota se puede mantener por delante, lo que les daría buenas velocidades.



Normalmente en este etapa existe el dilema de si adentrarse más en el océano o si quedarse junto a la costa, pero todo indica que optarán por la primera.

Después tocará conectar con los vientos alisios.

En estos momentos miran por encima de su hombro, intentando adivinar cómo se desarrollará el sistema.



Posiciones a las 15:30

Líder: MAPFRE
Velocidad del viento: 11-14 nudos
Dirección del viento: 22º - 40º
Barco más lento: BRUNEL (9,6 nudos)
Barco más rápido: ALVI, BRUN (10.2 nudos)
Menor intensidad de viento: MAPFRE, ADOR, ALVI, DRFT 9,9 nudos)
Mayor intensidad de viento: MAPFRE, DNFG (14 nudos)
Distancia a meta (líder): 4.891 millas

 
Leg 6
DTL
(NM)
GAIN/LOSS
(NM)
DTF
(NM)
Speed
(kt)
MAPF MAPF 0 0 4875.4 9
ALVI ALVI 1.5 0 4876.9 9
ADOR ADOR 1.7 0 4877 9
SCA1 SCA1 3  1 4878.4 9
DFRT DFRT 3.6  1 4878.9 9
TBRU TBRU 5.2 0 4880.5 9
VEST VEST DID NOT START




Rolly Tasker Sails 2023 FOOTERVaikobi 2024 FOOTERJ Composites J/45

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted today at 8:09 pm
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted today at 8:08 pm
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted today at 7:58 pm
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted today at 5:13 pm
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted today at 5:03 pm
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted today at 4:33 pm
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted today at 4:24 pm
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted today at 9:34 am
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted today at 8:07 am
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted today at 6:04 am