Please select your home edition
Edition
T Clewring J-class

New Manson Boss proves to be a shackle bender on test

by Richard Gladwell on 17 Mar 2013
The consequences of anchors which failed to hold in the 2010 Phuket King’s Cup Tracey Johnstone

Manson Marine completed seabed testing on their new Boss model with a 15.7kg (35lb) anchor bending two sets of shackles, and causing the test to be stopped at almost ten tonnes of load being exerted on the anchor by the powerful tug being used for live seabed testing.

'Testing began on Auckland Harbour, with 40ft (12metres) of 5/16(8mm) chain and 3/8 (9.5mm) shackles and a scope of 5:1 using a 90 tonne tug boat, says Manson's Ned Wood. 'This rig exerted up to 2000kg (4500lb) of load on the Manson Boss - but bent all the shackles in the test rig!

'Manson testing staff returned to the dock, went to a local ships chandler and bought 5/8 (15.8mm) shackles and 60ft (18metres) of smaller half inch (12.7mm) chain.

'We went back out testing on the tug again, and pulling on the 35lb (15.8kg) Manson Boss. This time testing had to stop at 4200kg (9250lb) because the 5/8 (15.8mm) shackles were all bending.

'From our tests, it would seem that the only problem you’re going to have with your new Manson Boss is that you could bend your shackles. How is that for peace of mind?' he asks.

Wood says the design brief for the new Manson Boss was focused on faster setting, with greater holding power.

A strong, reliable anchor is the most important piece of safety equipment aboard any boat, being able to stop a bad situation getting worse, and allowing a boat to hold a position until assistance arrives, or repairs can be effected.

'As well, when cruising, you sleep soundly at night,' says Wood. 'We all know there is nothing worse than your anchor dragging and having to get up at 3am and untangle your boat from the boat next door - with frayed tempers all around.'



The new Manson Boss also features a new Shackle Preventor, this quickly changes the anchor from a fixed shank anchor into a sliding shank so cruisers can anchor in rocks and coral. To dislodge a fouled anchor the skipper simply drives forward over the top of the Manson Boss and releases it.

'The Boss anchor is designed and built to work in all seabeds, it’s truly multipurpose. The high tensile steel shank has also been specifically designed to fit into the tricky through rollers on launches,' Wood explains.

Anchoring is fairly simple physics - the bigger the fluke, the more holding power the anchor has. This quality is the fundamental to the Manson Boss design which is huge for its weight. In other words the surface area of the fluke is generating more holding power than just the physical weight of the anchor.

In addition to the new Manson Boss, Manson also build the Supreme Anchor which has been winning anchoring competitions for the last seven years and is an ideal cruising anchor. Manson also have a range of Lloyd’s Register approved conventional Plough Type and Bruce Type anchors.

Manson also manufacture stainless steel anchors for cruisers who prefers the smart look of a shiny anchor on the bow of their boat.

A feature of all anchors in the Manson range is Lloyd’s Register certification which is the the most comprehensive certification an anchor can get. This includes certification that the anchor is built from Lloyds Register approved steel and by Lloyds Register approved welders.

'The new Manson Boss Anchor, offers you so much more protection, it’s certainly a cruisers best insurance policy, ' is Wood's parting quip.

Southern Spars - 100upffront 660x82InSunSport - NZ

Related Articles

Gladwell's Line - Does the America's Cup really need a Star Chamber?
The first meeting of the three-man America's Cup Arbitration Panel is believed to have taken place in London The first meeting of the three-man America's Cup Arbitration Panel is believed to have taken place in London in the past week or so. Officially the date hasn't been publicly announced. The venue hasn't been publicly named, and the parties have appeared before a Panel that is publicly nameless.
Posted on 23 Jul
America's Cup - Glenn Ashby on Emirates Team NZ's road to Bermuda
Part 2 of the interview with Emirates Team NZ skipper Glenn Ashby. In this part of the interview we look at what is going to happen once Emirates Team NZ get their 'AC49.5' sailing in Auckland, and how the campaign may shape up before they leave for Bermuda. Ashby wouldn’t be drawn on whether Team New Zealand had started their AC50 build, with July being the usual start of what is usually a five-month build and commissioning period for an end of December launch.
Posted on 10 Jul
America's Cup - Glenn Ashby on Emirates Team NZ's new AC49.5
Sail-World talks with Emirates Team NZ skipper, Glenn Ashby on what is different about the team's new test boat Just under 11 months out from the 35th America’s Cup, Team New Zealand does not seem to be in its customary place at the front of the starting grid to be the first to launch their Challenger, or are they? Although they will be one of the last of the six teams to launch an AC45 Surrogate, Emirates Team New Zealand may have stolen a march with a boat that is as close as you can get to an AC50.
Posted on 9 Jul
Gladwell's Line - Emirates Team NZ launches shadow AC50
Emirates Team NZ took a late but significant step along the road to the 35th America's Cup, with the launch of their AC4 Emirates Team NZ took a late but significant step along the road to the 35th America's Cup, with the launch of their AC45S - as the test boats are called in the Protocol which governs the 2017 event. The bloated Protocol, which now runs to 83 pages of legalese, is restrictive on the size of boat that can be built as a test platform but doesn't restrict the number that can be built.
Posted on 22 Jun
Platino recovery - Family confirms that tug has made rendezvous
Reports in social media say a salvage tug has made a rendezvous with the Platino earlier than expected. Reports in social media by family and friends of Nick Saull, the crew member killed during a catastrophic incident abroad the 66ft yacht Platino say the salvage tug which left on Tuesday night has made the rendezvous earlier than expected. The Facebook report says the tug, Sea Pelican, arrived on Friday morning, the weather in the area has eased and with a more favorable outlook.
Posted on 16 Jun
Rio 2016 - Double Olympic medallist on the delights of Guanabara Bay
Olympic Gold and Bronze medallist Bruce Kendall updates on the 2016 Olympic venue at Guanabara Bay. Olympic Gold and Bronze medallist, and now a windsurfer coach, Bruce Kendall has made several trips to the 2016 Olympic venue at Guanabara Bay. He updates on the pollution issue which is clearly not going to be resolved in a couple of months, and also shares his views on the venue from a sailing competition perspective.
Posted on 14 Jun
America's Cup - Artemis win Chicago as Team Japan wins two races
Louis Vuitton America's Cup World Series got three races away on Super Sunday. After losing the first official day of racing due to light winds and the non-arrival of the onshore breeze, Louis Vuitton America's Cup World Series got three races away on Super Sunday. From a racing perspective this was probably the best day of racing yet in the series which counts for points in the Qualifying Series of the America's Cup in 11 months time.
Posted on 12 Jun
America's Cup - Emirates TNZ NZ and Oracle capsize in Chicago Practice
Emirates Team New Zealand and Oracle Team USA capsized in Practice Racing at the Louis Vuitton ACWS Chicago There was action aplenty on Practice Day at Louis Vuitton America's Cup World Series Chicago, after Emirates Team New Zealand capsized in their match with Oracle Team USA, and then Oracle Team USA capsized later in the day. Team NZ's skipper skipper Glenn Ashby performed some impressive acrobatics ejecting from the AC45 capsize, without injury.
Posted on 11 Jun
America's Cup - Changes proposed to control future Cup options
Changes are being mooted to put the America's Cup on a longer-term footing according to the Daily Telegraph (UK) News that changes are being mooted to put the America's Cup on a longer-term footing is being floated in the Daily Telegraph (UK) by the British Challenger, Land Rover BAR. According to the Telegraph, some of the teams in the 2017 America's Cup are keen to lock-in parameters which would bind successive holders of the a style and frequency for the next America's Cup Match.
Posted on 8 Jun
America's Cup - AC50 construction uncovered - Part 2 - Wings and Costs
Second part of a two-part series looking at the AC50 construction progress at Core Builders Composites Second part of a two-part series looking at the construction progress at Core Builders Composites, and features of the AC50 class which will be used in the 35th America's Cup in Bermuda. Tim Smyth takes us on a tour of the CBC facility in Warkworth, and hour's drive north of Auckland. Where several AC50's, components and wingsails are under construction or have already been shipped to the teams.
Posted on 5 Jun