Please select your home edition
Edition
Mackay Boats

Check this sailing gear more often during the season

by John Jamieson on 4 Apr 2014
Off Cape Hatteras Captain John Jamieson http://www.skippertips.com
Master sailor, offshore racer, sailmaker and author Brian Hancock tells a tale of a transatlantic delivery that turned into a nightmare in his classic 'Maximum Sail Power'. The crew had checked their sailing gear, sails, and lines. And all looked under control--or so they thought.

Until...

...one specific vital line snapped. In a matter of seconds, their sail turned into a nightmare. Read on to discover how to avoid this common sailing situation with this simple sailing tip!

Beware of overconfidence on one of the most complex, sophisticated pieces of equipment on deck. Indeed, sailors often talk about systems. Sailboat systems could be defined as something that requires multiple pieces that work together to produce the desired effect.

Now, that could mean most anything, but in my mind, it means complex pieces of equipment, like your galley, your engine, your marine sanitation device. On deck, I would consider the roller furling unit to be a system. Why? This single system requires multiple parts to work together for the desired effect. A swivel at the hoist, drum at the bottom, fairleads, blocks, line and dozens of internal parts. If one of those fails, it could compromise this system.

Reliable? For the most part. Except for those 'weak links' we talk about from time to time. Each of your sailing boat systems has a weak link. And these gremlins are most often hidden, forgotten about, or those things that we sometimes say in a rush 'oh, I just checked it yesterday' or 'I'll get to it next month' or 'we'll do that later'.

So what was the culprit in the opening scenario? Furling line. It snapped and they were done for. In the blink of an eye, they lost control of the Genoa in those high winds. They needed it furled and they were stuck with no way to roll it up! That meant tons of time on a pitching, rolling foredeck doing the 'Bronco-Billy' to try to haul the sail down.

Friction fought them as they pulled and hauled to try to lower the massive sail inside the narrow furling extrusion tube. So here's the 'lesson-learned' in this sea story...

Check your furling line each time before you get underway from bow to stern. Any chafe means you need to change it out before you cast off. Also, you need to change out the entire furling line once a year as a preventative maintenance task. Remove and replace all of the furling line to give you more peace of mind throughout the sailing season.

But that's not all...
Do not leave the safety of protected waters without an alternate 'hank on' method to hoist a headsail. 'Hank-ons' are not some antiquated piece of equipment from the days of Bligh. They are a seamanlike sail that should be your primary means of headsail propulsion in case your furling unit fails. And if you need to claw off a lee shore to windward, you can bet a hank-on could make a big difference in your ability to do so.

Final Thoughts
Under no circumstance should you listen to any market hype that states that furling units are fail-free. They are not. I have yet to ever hear of a hank-on headsail that failed and could not be hauled down in a minute or two. They go up; they come down. Carry a hank-on headsail or two. Discuss rigging alternatives with your sailmaker or rigger (i.e. a removable inner forestay with proper mast support).

~~~~~~~~~~~~~~~~

Use this easy sailing tip for safer sailing this sailing season. Keep your furling gear 'fit as a fiddle' for worry-free cruising on the waters of the world.

John Jamieson (Captain John) with shows you the no-nonsense cruising skills you need for safer sailing worldwide. Visit his website. Sign up for his Free, highly popular weekly 'Captain John's Sailing Tip-of-the-Week'. Discover how you can gain instant access to hundreds of sailing articles, sailing skills videos, sailing tips newsletters and Free sailing topic e-Books!
PredictWind.comAncasta Ker 40+ 660x82Zhik Yachting 660x82

Related Articles

Two Oceans, One Rock in a Proa.
A Proa is a multihull sailboat common in the South Pacific and Indonesia. They have two different sized, parallel hulls. A Proa is a multihull sailboat common in the South Pacific and Indonesia. They have two different sized, but parallel hulls. Jzero, the Proa pictured here is a shunting boat and does not tack. Ryan Finn is launching the modified 36-foot Proa, so as to accomplish the fastest-ever, nonstop solo-sail, around the Old Clipper-ship Cape Horn Route from New York to San Francisco.
Posted on 2 Dec
Predictwind release improved racing and cruising routing function
PredictWind has released a major upgrade to its Routing function, taking a much more graphic and interactive approach PredictWind has released a major upgrade to its Routing function, taking a much more graphic and interactive approach to what has been a black art of weather routing, used to chose the fastest route for racers or most comfortable route for cruisers.
Posted on 28 Nov
Only room for one at the top
The results of RMIT's (Royal Melbourne Institute of Technology) independent testing are in. The results of RMIT's (Royal Melbourne Institute of Technology) independent testing are in. Zhik® is the market leader in waterproof durability with a new standard that replicates the real world sailing environment and conditions. It is an astounding four times more so than the previous leader.
Posted on 28 Nov
Parlier reigns supreme in Hydrofoil Worlds
The south westerly breeze kicks over the land mass over north facing beach, making for flat water despite strong wind. Whatever the shortcomings of the Fremantle Doctor on the first day of competition, were made up for in spades on day two, when the wind kicked in early at 15 knots and quickly built to 18 with gusts as high as 26. The Rockingham course is perfectly suited to such conditions. The south westerly breeze kicks over the land mass over the north facing beach, making for flat water despite strong wind.
Posted on 27 Nov
Fourth Blog from on board Perie Banou II
Oh no - not the coffee cup Oh no - not the coffee cup - Jon keeps us all entertained as he approaches Reunion Island. The B&G chartplotter tells me since leaving the pleasant mid Western Australian town of Carnarvon (by world standards, an isolated town), that I have sailed some 2559 NM and have 751nm to go to Le Port Reunion Island. French. Reunion is a Suburb (department) of Paris. Population 844,000.
Posted on 23 Nov
Third Blog from onboard Perie Banou II
Wind over the last week has been quiet and mild - Trade Winds from South East and South South East. It is 0830am here. 1030 in Western Australia. Windy. Rather Windy. Wind over the last week has been quiet and mild - Trade Winds from South East and South South East. Barometer 1018 to 1020 whatever they are. Last night I tapped the barometer and it sorta went oops. 1015hPa. Blimey.
Posted on 18 Nov
Second Blog from onboard Perie Banou II
This is day 13 since leaving the mid Western Australian town of Carnarvon. Remote region. Beautiful town. This is day 13 since leaving the mid Western Australian town of Carnarvon. Remote region. Beautiful town. Kept cooler by the strong south winds, which make the trees bend and grow to the north. Carnarvon is nice, especially the months of September, October, November, and December. The wind is strong. Often near gale strength, with squalls and blue skies.
Posted on 15 Nov
NoveNove Maui Aloha Classic - Day 14 - A dramatic final day
After a week of light winds trades finally returned on last day of NoveNove Maui Aloha Classic to provide pulsating end After a week of light winds the trades finally returned on the last day of the 2016 NoveNove Maui Aloha Classic to provide a pulsating end to the event, which saw Kevin Pritchard (Starboard / Ezzy / MFC) defend his single elimination crown, while Sarah-Quita Offringa fought her way back through the double elimination with be crowned the women’s Aloha Classic Champion.
Posted on 14 Nov
NoveNove Maui Aloha Classic - Day 13
After another lay day NoveNove Aloha Classic could all boil down to tomorrow, which is final day of possible competition After another lay day in Maui the 2016 NoveNove Aloha Classic could all boil down to tomorrow, which is the final day of possible competition.
Posted on 13 Nov
METS - TorqueLite 2.0 to be released by Future Fibres at METS
Future Fibres' TorqueLite furling cables have helped change the way that yachts are sailed in the modern era. Since its inception in 2000, Future Fibres' TorqueLite furling cables have helped change the way that yachts are sailed in the modern era. Using the continuous winding process originally developed for America’s Cup and Open 60 campaigns, TorqueLite unique torque transfer enabled yachts to handle their large reaching sails much more easily and began to push towards larger and faster sails.
Posted on 11 Nov