sail-world.com -- Nacra Racing suspends delivery of Nacra 17 with carbon mast
Nacra Racing suspends delivery of Nacra 17 with carbon mast
Thu, 3 Jan 2013
Nacra Racing has reported to the International Sailing Federation with the following communication:
Due to quality issues with the upper section of the carbon mast, decision has been taken to suspend delivery of the Nacra 17 with the carbon mast.
The Nacra 17 will be delivered with an alloy mast until further notice. This mast section is similar to that of the Nacra F16 and F18. All teams which have already taken delivery of the Nacra 17 will receive an alloy mast and fittings to retrofit their boat.
We expect that delivery of the carbon mast will resume as soon as we are 100% convinced about the solution. All alloy masts in the marketplace will be swapped back to carbon masts. Instructions will follow.
Above actions has been discussed and agreed with both ISAF and NACRA 17 class association
In the process of finding the limits sailing with the curved daggerboards equipped Nacra 17, various teams have been sailing in conditions above 25 knots of wind accompanied with big waves thus huge loads on the boat during sailing and capsizing.
Although expected and taken into account in the design and test phase we found that some teams discovered cracks in their mast above the hound below the top of the mast.
Nacra Sailing regrets these problems and is fully aware of this situation and is taking its full responsibility. We believe that any Nacra products should be strong enough, also in extreme rough conditions as we have proven in the last 35+years. We are working hard with our design and production teams to overcome these problems and apologise for any inconvenience caused.
If you have any questions You can contact your regular contact within the organisation of Nacra Sailing, your dealer, distributor or if direct purchased by MNA's through info(at)nacrasailing.com . We are more than happy to answer your questions but please bear with us as it can be busy as you can imagine.
GME Standard Communications Pty Ltd
Leaders in communications and navigation. Their goal has always been to make products whose innovation, convenience and peace of mind can help improve the lives of their customers. [More info]
Performance Sailcraft Australia (Asia Pacific)
Laser builder Performance Sailcraft Australia has taken on the successful RS Sailboat range from Britain, and is now licensed to build and distribute all of the RS range in the Asia Pacific region. [More info]
Sydney Rigging Specialists
Sydney Rigging Specialists is a leading company in the supply of yacht rigging, cordage, marine fittings and accessories. We are based in Sydney and work from our specially fitted out rigging shop. [More info]