sail-world.com -- The seven vital sailing boat diesel checks
The seven vital sailing boat diesel checks
Thu, 4 Apr 2013
You turn the key, push the diesel engine starter button and your engine starts just as you expect. But did you realize that you still have seven quick checks to make that could spell the difference between a trouble free day on the water or the challenge of sailing into your marina dock without an engine?
Follow these seven vital tips from marine diesel guru Peter Compton to add life to your costly diesel engine and keep it in tip-top shape all sailing season long!
Checks Within 30 Seconds of Engine Startup:
Make sure that the 'big three' below are checked right after your engine cranks up. If things don't look right, shut the engine down right away to prevent damage. Troubleshoot and fix the problem before you start the engine again.
1. Watch for Exhaust Water
Look over the side. Make sure you have water flow from the exhaust outlet. On some boats, the water will spit instead of flow. As long as you see water flow, your engine will stay cool.
2. Glance at Your Oil Pressure Gauge
Oil is the blood of your engine. Without it, your engine will seize up, overheat, destroy its innards, and be ready for the scrap heap in no time. Check the oil gauge within the first few seconds. Normal range lies between 40 and 60 psi. Often, your pressure will be higher at startup until the engine warms up.
Look on the top, aft side of your engine for a bent pipe between the main engine body and the big exhaust hose. This raw-water pipe feeds spent exhaust water from your engine to the exhaust hose, which carries it aft and over the side. Place your hand on the bent pipe. It should feel warm to the touch. If cold (no exhaust flow) or hot (overheating), shut the engine down.
Check to make sure you have opened the raw water seacock. Inspect the sea water strainer for blockage. If both are clear, you might have a blocked intake on your hull.
5. Shine a Light for Leaks
Open the engine access hatch and shine your light from top to bottom. Look for leaks at the coolant cap, seals on the engine body, hose-to-fitting joints, high pressure hoses, and injectors. Drop to the engine drip pan. Do you see water or fluid dripping? Move aft to the packing gland. Drip type glands should have a drop or two each minute, but no more.
6. Inspect for Unusual Vibration
Before you cast off, check the transmission in forward, neutral, and reverse gear. Assign a crew to man the helm and engage the shifter at idle ahead, back to neutral, then idle astern. Your engine should move through each position without loud clunking of the transmission or excessive vibration.
7. Read Your Other Gauges
Once water circulates, water temp should read normal temps (about 165° - 180°--check your manual). Voltage should read between 12 - 14 and Amps should be on the positive (+) side of the 0. Check your manual for the manufacturer's specific recommendations for engine temperature, pressure, and voltage.
Make these sailboat diesel engine checks right after you start any engine. Your engine will reward you with reliable, works-every-time service, longer life, and fewer repair costs--wherever in the world you choose to cruise!
John Jamieson (Captain John) with 25+ years of experience shows you the no-nonsense cruising skills you need for safer sailing worldwide. Visit his website at www.skippertips.com. Sign up for the Free, highly popular weekly 'Captain John's Sailing Tip-of-the-Week'. Discover how you can gain instant access to hundreds of sailing articles, videos, and e-Books!
Onesails.com - Workforce
OneSails is the culmination of over 35 years of experience accumulated by our team in design and technology applied to sail-making. [More info]
Burke Marine, suppliers of international quality marine clothing and equipment, was founded by Martin Burke on the shores of Sydney Harbour in 1971. Visit our website for your nearest stockist. [More info]
Ensign Ship Brokers
Ensign Ship Brokers was established in 1980 and has spent the last 28 years expanding our marine knowledge and developing our reputation! We strive to provide the very best service! [More info]
GME Standard Communications Pty Ltd
Leaders in communications and navigation. Their goal has always been to make products whose innovation, convenience and peace of mind can help improve the lives of their customers. [More info]
Henri Lloyd was established in 1963 in Manchester, England. Mr Henri, as he became universally known, founded the company based upon hard earned principles of honesty, integrity and freedom. [More info]
Navionics is proud of its superb cartographic database comprising more than 25,000 charts and port plans; the largest privately owned database of its kind, the only one using full seamless technology [More info]
Ullman Sails Australia
The Ullman Sails Australia team provides service to customers all over Australia with four main locations in Brisbane, Perth, Sydney and the Whitsundays. [More info]
Vicsail Sydney Pty Ltd, launched into the Australian sailing fraternity in 1983 and has been sailing strong ever since. At Vicsail, “We Sail the Boats We Sell”. [More info]