sail-world.com -- America's Cup: Confessions of a Wingman
America's Cup: Confessions of a Wingman
Sat, 16 Mar 2013
Glenn Ashby describes his job as wing trimmer on Emirates Team NZ's AC72 as a bit like driving a truck.
The multiple A-Cat world champion, Olympic Silver medalist, and former Tornado cat world champion, is talking a really big truck with a 32-speed gearbox as it traveling up and down a series of hills and turns.
The driver, he says, must always think ahead, two or three moves ahead. And that’s what he does on board the AC72.
Glenn’s changing gears (adjusting the wing trim) almost constantly. Either driving a truck and trimming the wingsheet, or with the hydraulics, so there’s never a time when he’s not thinking, looking for the breeze ahead and changes in wind patterns – thinking about the next gear change to achieve best performance.
The wing is set up differently for different modes – upwind a low fast mode or high, slower mode for instance. Racing downwind, the wing set up has a huge influence on the boat’s performance and must be used accurately with the front sails, making for dozens of small adjustments throughout the leg.
'Anticipating the next gear change and executing it well, is where big gains can be made over your opponent,' says the former Australian sailmaker.
'Dean Barker, James Dagg, Ray Davies and I work closely on boat speed – effectively managing the speed and angle of the boat. It’s a team effort for best round-the-track speed and we all need to be on the same page.'
'It’s like sailing a double-handed dinghy in a way – the forward hand controls the mainsheet and the helm steers and they work together to extract maximum speed. It’s a bit like that on the AC72, but with a lot more buttons and strings to play with.
'To be effective we have to have good communication so we each know instinctively what the other is thinking. That’s one of the reasons time on the water is extremely valuable.'
Glenn recalls the first time they got up on the foils downwind. 'I’ll never forget looking through the tramp at the daggerboard going through the water – and knowing it was supporting the entire boat and the crew at close to 40 knots.
'It had been something that we had been working on for a very long time and to see it at AC72 scale was pretty awesome and a great feeling.'
'Part of me was saying ‘that’s not right’ and the other part was saying ‘this is exactly how it’s supposed to be. By getting rid of a lot of the drag the hulls are effectively just going along for the ride and something to sit on!.'
He admits to having more than a passing thought then about 'knowing if the foil goes bang or we have a hydraulic failure it would be very easy to capsize the boat.'
He says the team is pushing boundaries of foil and hull technologies to places where they have 'never been pushed before. It took a massive effort by a lot of people to get the boat up and foiling stably – a massive full team effort.'
'Now as a sailing team, we must continue to learn how to sail the boat to its full potential and keep pushing ourselves and the boundaries to the limits. A lot of the time we’re pushing into the unknown, but that’s what makes what we are doing so special. Hopefully the path we have chosen is the correct one.'
Onesails.com - Workforce
OneSails is the culmination of over 35 years of experience accumulated by our team in design and technology applied to sail-making. [More info]
GME Standard Communications Pty Ltd
Leaders in communications and navigation. Their goal has always been to make products whose innovation, convenience and peace of mind can help improve the lives of their customers. [More info]
Vicsail Sydney Pty Ltd, launched into the Australian sailing fraternity in 1983 and has been sailing strong ever since. At Vicsail, “We Sail the Boats We Sell”. [More info]