sail-world.com -- This Low Cost 'Line Saver' Could Save Your Sailing boat!
This Low Cost 'Line Saver' Could Save Your Sailing boat!
Wed, 13 Mar 2013
What one piece of low cost sailing gear could save your boat in a howling gale, or when tied up in a slip or alongside a pier, or in a swell-swept anchorage or mooring? Without it, your sailboat might well become just another marine insurance statistic! Discover one of the cheapest--but often forgotten--pieces of 'must have' sailing gear that will keep your sailing boat safe throughout the sailing season!
Few pieces of sailing gear are as cheap as chafing gear. Dock your boat alongside a pier, wharf, or seawall or inside a boat slip and you use docking lines. Each docking line connects from one point on your boat to another point ashore (when docked), in the seabed (when anchored), or to another boat (when rafted together).
As that line makes its journey from one point to another, it will rub, slide, grate, chafe, scrape, saw, or contact another part of your boat. This might be an open or closed chock, a corner of your hull, a sharp edge along your toe rail, or the razor-sharp side of a Genoa track.
Before the line arrives at the pier or piling, it contacts other 'line-killers'--sharp pier edges and corners, barnacle encrusted pilings, or jagged-edged concrete or steel structures.
Once you tie up your boat, check all around for these and other point-to-point areas that could present potential chafe problems. Imagine the tide rising and falling, or boat wakes that cause your boat to wallow alongside a pier or in her slip.
And ask yourself--where will the docking line make contact with an object that can do it harm? All of these areas will require protection to prevent line fiber destruction and failure.
Drop the anchor and your anchor line takes it on the chin--and not just the part beneath the surface. Your anchor line runs from a boat cleat and through a chock on its way to the seabed.
Constant rubbing and shock loads from passing boat wakes, ground swell, or shifting winds means sawing back and forth--and serious chafe! Add in some high octane storm winds and things can turn nasty in no time.
How to Make Chafing Gear Work for You:
Wrap a long piece of canvas around the line so that it spans the fitting by several inches on each side. Secure the ends of the chafing gear with nylon wire ties. Snip off the ends (yellow arrow in illustration).
Wrap a long piece of canvas around the line so that it spans the fitting by several inches on each side. Secure the ends of the chafing gear with nylon wire ties. Snip off the ends (yellow arrow).
Make your own chafing gear for pennies on the dollar. Use lengths of old garden hose, clean engine hose, fire hose being thrown out by your local fire department, soft PVC tubing, strips of canvas or similar spray dodger, awning, or enclosure material, or--in a pinch--rags and duct tape.
The easiest chafing gear consists of hose split length-wise, canvas sewn into a sleeve or canvas wrapped around the line and tied off with twine or nylon wire ties (see illustration).
Use the steps below to make up your own chafing gear. The steps show the method for canvas strips, but modify these as you see fit for the other materials described above.
Tools You Will Need:
* Chafing Gear (from list above) * 6' - 9' nylon wire ties * Exacto knife * Wire cutters
Seven Simple Steps to Make Chafing Gear:
1. Measure the chafing points described above. 2. Split the chafing gear lengthwise with the Exacto knife. 3. Slide the chafing gear onto the line. 4. Center it at the contact point. 5. Wrap the gear tight to hold it in place. 6. Apply nylon wire ties to each end; cut excess off. 7. Monitor and re-center the chafing gear as needed.
Check your chafing gear often. It tends to move up or down the line after several hours. Make your chafing gear lengths longer in less protected anchorages for better protection. So, protect your costly docking and anchoring lines from the ravages of chafe, wear, and tear. Put chafing gear 'sentries' to work aboard your sailboat to save big money in repair costs--wherever in the world you choose to cruise!
John Jamieson (Captain John) with 25+ years of experience shows you the no-nonsense cruising skills you need for safer sailing worldwide. Visit his website at www.skippertips.com. Sign up for the Free, highly popular weekly 'Captain John's Sailing Tip-of-the-Week'. Discover how you can gain instant access to hundreds of sailing articles, videos, and e-Books!
Onesails.com - Workforce
OneSails is the culmination of over 35 years of experience accumulated by our team in design and technology applied to sail-making. [More info]
Burke Marine, suppliers of international quality marine clothing and equipment, was founded by Martin Burke on the shores of Sydney Harbour in 1971. Visit our website for your nearest stockist. [More info]
Ensign Ship Brokers
Ensign Ship Brokers was established in 1980 and has spent the last 28 years expanding our marine knowledge and developing our reputation! We strive to provide the very best service! [More info]
Festival of Sails
The Festival of Sails is the largest annual keel boat regatta in the Southern Hemisphere with over 400 yachts and 4300 competitors annually taking part in the event. [More info]
GME Standard Communications Pty Ltd
Leaders in communications and navigation. Their goal has always been to make products whose innovation, convenience and peace of mind can help improve the lives of their customers. [More info]
Henri Lloyd was established in 1963 in Manchester, England. Mr Henri, as he became universally known, founded the company based upon hard earned principles of honesty, integrity and freedom. [More info]
Hood Sailmakers (Aust) P/L is 100% Australian owned and operated. The first sail loft outside of the USA to be granted a franchise in 1968 by the founder Ted Hood. [More info]
Navionics is proud of its superb cartographic database comprising more than 25,000 charts and port plans; the largest privately owned database of its kind, the only one using full seamless technology [More info]
Performance Sailcraft Australia (Asia Pacific)
Laser builder Performance Sailcraft Australia has taken on the successful RS Sailboat range from Britain, and is now licensed to build and distribute all of the RS range in the Asia Pacific region. [More info]
Quantum Australasia Pty Ltd
Quantum Sail Design Group designs, engineers and manufactures sails for racers and cruisers who demand the highest levels of quality and performance. [More info]
Ullman Sails Australia
The Ullman Sails Australia team provides service to customers all over Australia with four main locations in Brisbane, Perth, Sydney and the Whitsundays. [More info]