sail-world.com
 
 
News Home Boats for Sale MarineBusiness-World Sail-World Racing Cruising Int Magnetic Is RW Photo Gallery FishingBoating
Sail-World.com : Varnishing: quick tips to keep you on the right path
Varnishing: quick tips to keep you on the right path

'Superb varnish quality - something to aim for'    .

Varnishing the brightwork on a boat seems, at first sight, a simple process. After all, you just need the varnish and a brush, right? Well, as many of you have already found out, it's not quite so simple. But with some attention to detail and some sturdy tips to help you on your way, you'll be enjoying your brightwork instead of hating it. Here, Interlux offers some quick tips to keep you on the right path:

If it looks good, you will love it! -  .. .  
Surface Preparation:
It is as important as the final coat and can make the difference between a mediocre and a quality varnish work.

Overall advice:
1. Select your tools and chemicals wisely. Practice on 'test' pieces of wood.
2. Blisters or flaking must be completely scraped and cleaned.
3. Keep plenty of sandpaper on hand in a wide range of grits (50-320). Store in a low humidity area.
4. Round the edges of scrapers with a file to avoid gouging the wood surface.
5. Don’t rush the prep stages. Proper preparation is mandatory to achieve superior finishing results.

Essential Equipment:
Sandpaper: Aluminum Oxide or production sandpaper – grits ranging from 50 – 320
Sanding Block: A piece of 2' x 4' long enough to cover multiple imperfections, yet easy to hold, is suitable
Scrapers: Various sizes with rounded corners to avoid gouging of surface
Tape: To mask off surfaces not to be treated
Lint-Free Cloth: Cheesecloth or commercial tack cloth to eliminate surface residue
Brushes: Various sizes including straight and beveled edges
Dropcloths:To protect large areas

Optional Tools:
Finishing Sanders: Expedites the sanding process, but take care not to use too vigorously as sanders
may damage the wood
Heat Gun: Particularly useful on curved or irregular surfaces to remove old paint and varnish. (Do not use Heat Guns to remove antifouling paint)
Vacuum Cleaner: To efficiently remove residue between sandings and before varnish applications

Sanding:
1. Always sand with the grain.
2. Keep sandpaper clean and change often.
3. Don’t overuse a heat gun. It can be damaging to the wood
and to the glue joints
4. Sand 'By the Numbers' finishing with progressively finer grits of paper.

Cleaning, Filling and Sealing:
If you are varnishing teak...
1. Sand entire surface to be varnished with 80 grit sandpaper.
2. Remove sanding residue from wood by wiping with Solvent Wash 202 or Special Thinner 216 to remove as much surface oil as possible. When sanding varnish, it is best to remove sanding residue with Brushing Liquid 333.
3. The first coat should be thinned 15-20% by volume with the recommended thinner in order to get better penetration into the wood and seal it and establish a foundation for subsequent coats of varnish to adhere to.
4. After an overnight dry, sand with 220 grit sandpaper, then wipe clean with Brushing Liquid 333.
5. Apply additional coats of full-bodied varnish until desired finish is obtained, allowing proper dry times between coats. Sand between coats with 220 grit sandpaper, then wipe clean with appropriate thinner.

Bleaching, Filling and Sealing:

1. Always neutralize and flush the wood surface thoroughly after bleaching.
2. Do not attempt to use bleach as a varnish remover. To remove varnish use Interlux Interstrip 299E.
3. Bleaching may raise the grain of the wood so it is recommended to sand after bleaching.
4. Do Not allow wood filler to dry completely before wiping off excess. Otherwise, it will become almost impossible to remove.

Varnish Preparation:
1. Avoid stirring or shaking varnish.
2. Pour varnish through a filter or through a pair of high-density stockings into a clean container.
3. Don’t use varnish that has set open for a long period of time. It will have picked up dust.
4. Keep surfaces to be varnished as dust free as possible. Use tack rags or vacuum for clean up.
5. Avoid gusty weather and do not varnish wood exposed to direct sunlight.
6. Avoid using varnish direct from the can, this will cause the varnish to age prematurely and may introduce contamination into the can. Pour the amount of varnish that you expect to use at any one time, into a separate container.
7. Never leave bare wood exposed too long, as it will absorb moisture from the atmosphere.
8. Varnishing is best achieved on warm, dry mornings, cold weather retards drying. High humidity or moisture will spoil the gloss.

Brushes:
1. Fine results can be obtained with either natural or synthetic bristle brushes. With proper care, a synthetic bristle brush will greatly outlast a natural bristle brush.
2. On large areas use a foam roller to apply the initial coat followed immediately behind with a wide brush for the finishing strokes, this is best done by two people.
3. Overlap brush strokes.
4. Always use a clean brush that has been kept specifically for varnishing.
5. Clean the brushes before using with Brushing Liquid 333 and then spin dry using a brush spinner.
6. After varnishing clean the brush using low odor mineral spirits. For the final cleaning use Brushing Liquid 333. Then wash the brush in detergent and warm water, spin dry using a brush spinner and wrap in greaseproof paper in a fine chisel shape.
7. For brushes that have not been completely cleaned use Interstrip 399 to soften and clean then switch to Brushing Liquid 333 for a final cleaning.
8. After cleaning hang the brush by its handle to avoid any 'fishtailing' of the bristles.

For fully detailed instructions on how to turn out a fantastic result EVERY time, refer to Interlux's comprehensive instructions. Click here and you will be able to download and print out their very best advice, straight from the experts. (These hot tips above are included, so you won't need to print them both out.)


by Interlux/Sail-World Cruising


  

Click on the FB Like link to post this story to your FB wall

http://www.sail-world.com/index.cfm?nid=121716

9:35 PM Thu 1 May 2014GMT


Click here for printer friendly version
Click here to send us feedback or comments about this story.







Sail-World Cruising News - local and the World



Death by Dinghy by Allan Riches Brunei Bay Radio,








A case of crossed wires? A shocking situation! by Stuart Carruthers, RYA Cruising Manager,






Canal Boating in the Alsace with the Galley Guys by Greg Nicoll with John Armstrong,




World ARC fleet arrives in Darwin by World Cruising Club,






Dangers of the Dinghy trip back to your boat by Rob Kothe & the Sail-World Team,






Where in the world are our strongest corals? by Hanny Rivera - Cohen's Lab,






Barnacle Busting by Neil and Ley Langford,




Polar research: Six priorities for Antarctic science by Mahlon C. Kennicutt II and colleagues,
























Blue Planet Odyssey - Beset in Arctic Bay ice + Video
2014 National 4x4 Outdoors Show: Popularity of caravanning and camping
Last chance to join 2014 Multihull Solutions Whitsunday Rendezvous
Dangerous conditions for boaters from this evening
Garcia Yachts Exploration 45 - Jimmy Cornell's newest adventure
Sustainable Seafood - How to purchase with confidence
Risks to penguin populations continues
Dangerous conditions for boaters from this afternoon
ARC Baltic fleet head from Helsinki to Stockholm
Follow these tips when anchoring
Swedish couple rescued off Cook Islands
Elaine Fowler, RPAYC's first female life member elected
Refurbished Protector project 'better than buying new'
Galley Guys meet the Spice Lady
Discover science of maritime exploration at National Maritime Museum
Royal Prince Alfred Yacht Club’s Jack Gale training centre born
Multihull Central launches Aquila range at SIBS *Feature
If all else fails read the instructions!!
ARC Baltic fleet cruising and anchoring in the Finnish archipelago
Phuket Yacht Show: new kid on the block taking on PIMEX? *Feature
Endangered species are like Movie Stars - Charlie Sheens and Tom Hanks   
Vanuatu Customs making life easier for visiting cruising yachts   
Multihull Central - Covering all the bases *Feature   
Baltic 4 Nations rally is now in full swing   
Flags at Sea, an infographic by John Tissott   
Cruising lessons from ocean racers   
Sydney International Boat Show - Day 2 *Feature   
Marine Rescue volunteers celebrate new unit and $120,000 vessel   
Procedures set out for waterborne visitors to Vanuatu   
17-year-old RNLI volunteer saves child in first rescue mission + Video   
Teen names latest RNLI Shannon class lifeboat in Poole + Video   
Fascinating opportunity with OceansWatch   
Pantaenius Insurance - being seen in yellow, green and orange *Feature   
Fake GPS signals detected when cruising the high seas   
Sydney International Boat Show - Changed conditions on Sydney Harbour   
Our new Cruising Editor editor remembers his first offshore adventure   
World Odyssey Race - Bringing back the Corinthian spirit   
Blue Planet Odyssey Rally - Raising climate change awareness   
Pacific Circuit Rally - 2015   
All Points Rally departs this November   


For this week's complete news stories select    Last 7 Days
   Search All News
For last month's complete news stories select    Last 30 Days
   Archive News







Sail-World.com  


















Switch Default Region to:

Social Media

Asia

Australia

Canada

Europe

New Zealand

United Kingdom


http://www.sail-world.com/event_images/image/Twitter_logo_small.png http://www.sail-world.com/event_images/image/FaceBook-icon.png  http://www.sail-world.com/event_images/image/RSS-Icon.png

United States

Cruising Northern

Cruising Southern

MarineBusiness World

PowerBoat World

FishingBoating World

 

Contact

Commercial

News

Search

Contact Us

Advertisers Information

Submit news/events

Search Stories/Text

Feedback

Advertisers Directory

Newsletter Archive

Photo Gallery

 

Banner Advertising Details

Newsletter Subscribe

Video Gallery

Policies

 

 

 

Privacy Policy

 

 


Cookie Policy

 

 



This site and its contents are © Copyright TetraMedia and/or the original author, photographer etc. All Rights Reserved.  Photographs are copyright by law.  If you wish to use or buy a photograph, contact the photographer directly.
XLXL VIR Cru SH
LocalAds   DE  ES  FR  IT