Please select your home edition
Edition
Vaikobi 2024 LEADERBOARD

Tips for selecting the best boatyard

by BoatUS on 25 Jun 2014
How can you tell if a boatyard is good to work with? BoatUS has some tips. BoatUS Press Room
While boatyards are busy, summer may be a better time to have repair work done on the boat. Why? The typical boatyard and shop warranty on labor is 90 days, giving boaters the time needed to use the boat and ensure a correct repair. But where does a boater go to get repairs done right?

Boat Owners Association of The United States (BoatUS) has some tips but they are equally valid no matter where you sail:

1. Use what your eyes are telling you:
Sometimes it’s the little things that give you a sign that the yard you are entering isn’t the best. One BoatUS member took his boat to a repair facility and thought that the abundance of boats in the lot meant that the boatyard was popular. It wasn’t until after the yard started giving odd excuses for delays and then made him pay for hundreds of dollars of ineffective engine repairs before releasing the boat, did the member notice that few, if any, of the boats in the lot had been moved in years.

2. All recommendations aren’t the same:
Online recommendations are a mish-mash of good and bad: more reliable ones have real names attached and specific details in postings. Fellow boaters are likely the best folks to recommend a yard, but go one step further: be sure that the repairs are similar to what you need. Another option is to ask a marine surveyor.

These professionals are often knowledgeable about the quality of work in local repair yards, as long as they’re impartial and unaffiliated with any shop or boatyard. Look for a boat surveyor having SAMS or NAMS credentials as these surveyor associations require their members to be independent. Another good sign to see is a shop that follows American Boat and Yacht Council (ABYC) guidelines for repairs, which ensures that crucial safety standards are met. ABYC technicians also get specialized certification in a range of boat systems.

3. Dealerships may offer more, but don’t write off independents:
There are certain benefits to taking an out-of-warranty boat or motor to a dealership, with the best training and equipment being at the top of the list. Dealerships also enjoy better parts connections. On the other hand, most well established independent repair facilities also produce high quality work – especially those run by former or current factory-trained technicians. And unlike a dealership, they must compete on repair business alone and their prices are usually lower.

4. Look for shops that specialize:
Boats vary in type, size and complexity and so do repair facilities. Don’t bring a 34-foot trawler for repairs to a shop that mostly works on trailer boats, and don’t expect the guy living in a van down by the river to fix your high-tech outboard.

'Always check around first before doing business,' said BoatUS Director of Consumer Affairs Charles Fort. 'Many boaters only have the summer to enjoy their boats, so any problems could lead to a premature end of the boating BoatUS
2024 fill-in (bottom)Boat Books Australia FOOTERCyclops Marine 2023 November - FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted today at 8:09 pm
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted today at 8:08 pm
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted today at 7:58 pm
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted today at 5:13 pm
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted today at 5:03 pm
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted today at 4:33 pm
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted today at 4:24 pm
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted today at 9:34 am
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted today at 8:07 am
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted today at 6:04 am