Please select your home edition
Edition
Vetus-Maxwell 2021 v2 LEADERBOARD

America's Cup- Artemis revealed - Adam May talks with Bob Fisher

by Bob Fisher on 4 Aug 2013
Artemis Racing training in San Francisco, July 31, 2013 ACEA - Photo Gilles Martin-Raget http://photo.americascup.com/

Adam May, who is in charge of performance analysis for Artemis Racing was assessing the opposition for the Louis Vuitton semi-final match that is due to start next Tuesday, 6th August.

May is a Tornado Olympian and a foiling Moth sailor, who, comparing the two boats, said: 'Luna Rossa is a slightly higher volume hull shape with slightly more rocker profile through the mid-section; we (Artemis) have probably a slightly lower volume with a lower profile shape – less freeboard – that’s the main difference between us.’

He continued with the comparison by saying that in the AC-72s the differences in speed were not greatly accountable to relevant hull shapes; other things were more important: 'Off the wind you are hopefully foiling these boats,’ he said, 'so that hull shape is less relevant for that. With their greater rocker, the Luna Rossa boat perhaps has greater manoeuvrability due to the profile and should be tacking quite well.'

That was not to deny his own team’s chances. 'Artemis may be better in straight lines,' said May, 'but hull shape counts for little in ultimate speed. Foils make the big difference.' Fortunately for the Artemis Racing team, the new boat was foiling within minutes of leaving the dock on her first day in the water.

There are, however, many unknowns, and most of these can only be resolved with time spent on the water. 'We don’t really know where we are,' he said, 'and it’s a huge learning process every time we sail the boat.' The canting angle of the foils is one of the most important factors and the optimum can only be judged from sailing experience.

'Six days to 73 or so,' he commented, but smiled as he added: 'We are seeing good numbers already. There’s stuff learned from the red boat, and stuff from the (foiling AC) 45 and its all gone into ‘Big Blue’.' By the time the two boats meet in anger, Artemis’ ‘Big Blue’ will have possibly completed 40 hours of sailing, which includes technical and technique assessments, while the red and chrome the Luna Rossa crew will have had close to 80 days of all types of sailing, including racing on the course, since their boat was launched in Auckland at the end of last October.

Everyone agrees that time on the water counts for much, which is why Emirates Team New Zealand was out on the course practicing on Saturday morning, aiming no doubt to perfect the foil-gybing which continues to hold its rivals in awe and determination. Matching it in the short-term may be difficult but it was something that Adam May acknowledged: 'The Kiwis are ahead of us all,' and somewhat grudgingly added: 'at present.'






Rooster 2023 - Aquafleece Robe - FOOTERNavico AUS Zeus3S FOOTER38 South / Jeanneau AUS SF30 OD - FOOTER

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted today at 8:09 pm
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted today at 8:08 pm
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted today at 7:58 pm
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted today at 5:13 pm
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted today at 5:03 pm
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted today at 4:33 pm
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted today at 4:25 pm
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted today at 9:34 am
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted today at 8:07 am
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted today at 6:04 am