Please select your home edition
Edition
2024 fill-in (top)

Alinghi's America's Cup Defender reported to be 'spider-like'

by Richard Gladwell on 3 Jul 2009
Le Black the 41fter is believed to be a strong influence on the 90ft LWL yacht being built for Alinghi Copyright / Alinghi http://www.alinghi.com

Sail-World has been advised by normally reliable and knowledgeable persons who have seen Alinghi's new America's Cup Defender, and who have been briefed to a degree by Alinghi personnel.

They report that the the new Alinghi multihull is, as expected a scaled up 'LeBlack' concept catamaran. ('LeBlack' being a 41ft multihull owned by Ernesto Bertarelli).

The most surprising features of the catamaran are that she carries a motor and powered winches – reducing the numbers of grinders required to be carried. Our observers could see no evidence of waterballast, as has been widely rumoured, but could not rule that design option out.

If water ballast is carried, an engine would probably be the only way of quickly pumping water ballast although it should be noted that ISAF Racing Rule 51 expressly prohibits this action saying 'Water .... shall not be moved for the purpose of changing trim or stability.'


Alinghi is also believed to two interchangeable rigs – one a soft sail carried behind a rotating wing mast and a hard wing mast of the type normally seen on C-class catamarans.

Overall, the new Alinghi is quite different from the trimaran BOR90, trialled by BMW Oracle Racing, with the catamaran being much lighter and fragile then the trimaran favoured by BMWOR, with her fine hulls and wide beam (believed to by up to 90ft) giving a spider like appearance. Duncan MacLane (USA) one of the designers and skipper of the US Little America's Cup winner in 1996, is a designer with Alinghi, for the development and trialling of their catamaran.


Although Alinghi is long, it is not believed to be more than 90ft LWL and has a single mast – in other words the maxium length allowed under the Deed of Gift for a single masted yacht.

Although no public announcement has been made by Alinghi, they are expected to take down the temporary shed this weekend and will show the boat for the first time.

The smart money is on Team Alinghi launching their Defender by helicopter next Wednesday 8 July.


According to observers, the fine platform looks extremely light and fragile - reinforced with wire/cables which carry significant loads – carefully tuned to keep the structure correctly aligned under stress and rig loads.

There is no further advice on the venue which must be announced within the next four weeks, the options believed to be narrowed to Valencia, as ordered by the New York Supreme Court, or Abu Dhabi, United Arab Emirates, which is a northern hemisphere venue and therefore only able to be selected by mutual consent in accordance with the Supreme Court decision, confirmed on Appeal.

Cyclops Marine 2023 November - FOOTERFlagstaff 2021AUG - Oceanis 40.1 - FOOTERHenri-Lloyd - For the Obsessed

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted today at 8:09 pm
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted today at 8:08 pm
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted today at 7:58 pm
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted today at 5:13 pm
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted today at 5:03 pm
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted today at 4:33 pm
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted today at 4:24 pm
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted today at 9:34 am
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted today at 8:07 am
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted today at 6:04 am