Please select your home edition
Edition
Vaikobi 2024 LEADERBOARD

The Clipper Race - Race 1 - Day 34 - Greenings push for victory

by The Clipper Race on 23 Sep 2017
2017-18 Clipper Round the World Yacht Race - Race 1 Day 34 Clipper Race
Only Greenings and Nasdaq remains at sea following the arrival of Visit Seattle late on Friday night, Punta del Este time.

Currently, Greenings is 55.04 nautical miles from the Finish Line, and Relief Skipper and Deputy Race Director Dan Smith says: “The final part of the sail is proving to be a slow one but we will get there. We had a wind hole this morning which required maximum concentration and now we are getting head winds slowing our progress.

“Luckily in the previous few days, we pushed the boat as hard as we could, clocking up good mileage while the wind was good which will hopefully be enough of a buffer to get us in in time to get us the race position we want after redress has been applied. We are very aware though that it’s not all over until we cross the line, and it still (feels like) a long way to go.”

While Greenings will officially cross the Finish Line in Punta del Este in eleventh place, the redress of 58 hours, 44 minutes, and 51 seconds awarded by the Race Committee for the forced diversion to Porto for a replacement Skipper could see the team claim the overall Atlantic Trade Winds Leg 1 win.

Visit Seattle, who crossed the line in tenth place, has also been granted a redress of 1 hour, 46 minutes, and 27 seconds, which will also be taken into account before the final standings for the opening leg are confirmed.

Nasdaq is currently off the southern tip of the Brazilian coast, 277.74nM from the finish line. The team is expected to arrive in Punta del Este tomorrow, between 1200 and 1800 local time (1100 – 1700 UTC).

The weather will be working in Nasdaq’s favour. Clipper Race Meteorologist Simon Rowell reports: “It’s starting to look a bit better as that front heads north, the next high-pressure cell should blob off the mainland just south [of the boats], with the wind then backing SSW to SE to NE on the final run in.

“It will get quite light as it does so, but you should at least be able to point in the right direction then. Also, it should get brighter and drier.”

Followers back home can watch the arrivals of both Nasdaq and Greenings into Uruguay by ‘liking’ the Clipper Race Facebook Live page.

As the Clipper Race fleet has almost completed the Atlantic Trade Winds Leg 1, the next Daily Update will be on Thursday 5 October, the day after the fleet begins the South Atlantic Challenge Leg 2 to Cape Town, South Africa. In the meantime, the latest news about the fleet and crew can be found on the Clipper Race Website.

To read all the Skipper reports in full, and also read the Crew Diaries for insightful views into life on board, visit the Clipper Race Team Pages.

To stay up to date with the fleet’s positions keep a close eye on the Clipper Race Viewer.
Vaikobi 2024 FOOTERX-Yachts X4.0J Composites J/99

Related Articles

Zhik kits out Australia's Olympic sailors
With industry-first high-performance neoprene-free wetsuit When Australia's 12 Olympic sailors take to the waters of Marseille in July this year, they'll wear the industry's first high-performance, neoprene-free wetsuits created by Sydney sailing apparel company Zhik.
Posted today at 8:09 pm
Holcim-PRB sustains bowsprit damage
Nicolas Lunven continues racing towards New York While in fifth position in The Transat CIC fleet, Team Holcim-PRB skipper Nicolas Lunven alerted his shore team on Wednesday morning that the boat's bowsprit had broken. The incident occurred overnight amid strong wind conditions.
Posted today at 8:08 pm
Momentous day for INEOS Britannia
As AC75 sets sail for first time INEOS Britannia's new race boat for the 37th America's Cup has set sail for the very first time. The British Challenger's AC75 took to the water in Barcelona with Olympic Gold medallists Sir Ben Ainslie and Giles Scott at the Helm on Wednesday 1st May.
Posted today at 7:58 pm
FlyingNikka is ready to fly again
Set to get back in the water for a new season of regattas Three appointments are planned for what is to all extents and purposes the first yacht in a new generation of full foiling regatta sailing boats, starting from the Spring Regattas held next weekend in Portofino, Liguria.
Posted today at 5:13 pm
52 Super Series PalmaVela Sailing Week Day 4
A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday A thrilling Thursday title tussle is on the cards after no racing was possible Wednesday at the 52 SUPER SERIES PalmaVela Sailing Week due to very strong winds on Mallorca's world renowned Bay of Palma.
Posted today at 5:03 pm
PlanetSail Episode 31: New Cup boats
With records and drama down under It's been a big month for the America's Cup as four of the six teams unveiled their brand new AC75s. Years of development work and close to 100,000 hours of build time, there is plenty riding on each of these new launches.
Posted today at 4:33 pm
Transat CIC day 4
Charlie Dalin and Yoann Richomme continue to lead in the Atlantic On The Transat CIC solo race across the North Atlantic from Lorient to New York, there are close duels at the top of both the IMOCAs and Class40s.
Posted today at 4:24 pm
Henri-Lloyd New Arrival: Dri Fast Polo
Designed to perform for long days in the sun, on or off shore Created by Henri-Lloyd 30 years ago, the DRI FAST Polo has become an industry staple. Clean and smart, the DRI FAST Polo is an extremely comfortable, quick drying polo, with added UV protection.
Posted today at 9:34 am
Cup Spy May 1: Kiwis call it quits
Emirates Team NZ have confirmed that they have finished sailing in NZ and are headed for Barcelona Emirates Team New Zealand has concluded their first sailing bloc, on May Day in Auckland. The America's Cup champions got away to an early start, in the face of a forecast of a freshening breeze, and finished sailing just after midday.
Posted today at 8:07 am
XR 41 hull plug in the making!
Get an exclusive behind-the-scenes look at the making of the XR 41 Get an exclusive behind-the-scenes look at the making of the XR 41, as the hull plug is being CNC machined with high precision and expertise at Nedcam in Holland.
Posted today at 6:04 am